Lexmark X792 Print Defects Manual

X792
Lexmark
Brand
Lexmark
Model
X792
Type
Print Defects Manual

This manual is also suitable for

Print defects guide
Repeating defects measurements
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects
on the print job indicates which particular part may be causing the defect.
Note: Make sure the current selection in the printer for Scale to Fit in the PDF menu is set to “No” for the rulers to be printed at
the correct size.
Change the print cartridge for the color that shows this defect.
94.2 mm
(3.71 inches)
37.7 mm
(1.48 inches)
41.6 mm
(1.64 inches)
42.7 mm
(1.68 inches)
Print defects guide
Page 1 of 2
Change the transfer module if one of these defects appears on the printed page. Change the fuser if one of these repeating defects
appears on the printed page.
47.1 mm
(1.85 inches)
59.7 mm
2.35 inches)
42.2 mm
(1.66 inches)
95.0 mm
(3.74 inches)
146.7 mm
(5.78 inches)
Print defects guide
Page 2 of 2
  • Page 1 1
  • Page 2 2

Lexmark X792 Print Defects Manual

X792
Lexmark
Brand
Lexmark
Model
X792
Type
Print Defects Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents