Roche cobas p 512 LCP1 is a fully automated pre-analytical system that offers integrated and standardized sample preparation, centrifugation, aliquoting, and sample storage. It optimizes laboratory processes by helping you reduce hands-on time, improve traceability, and enhance laboratory safety. The system is designed to process a wide range of sample types, including blood, urine, and cerebrospinal fluid, and can be used in a variety of clinical applications, including routine chemistry, hematology, and urinalysis.
Roche cobas p 512 LCP1 is a fully automated pre-analytical system that offers integrated and standardized sample preparation, centrifugation, aliquoting, and sample storage. It optimizes laboratory processes by helping you reduce hands-on time, improve traceability, and enhance laboratory safety. The system is designed to process a wide range of sample types, including blood, urine, and cerebrospinal fluid, and can be used in a variety of clinical applications, including routine chemistry, hematology, and urinalysis.
Addendum 9
For cobas p 512 pre-analytical system (64x) operator's manual 2.1
Name plate and safety label information
Addendum 9
Name plate and safety label information
2
Publication information
Publication version
Revision date
Change description
1.0
May 2020
New document
Revisions
This addendum contains additional information for the cobas p 512 pre-analytical system
(64x) operator's manual 2.1. It has been added following updates to:
The name plate and various safety labels following current labelling and safety
concepts
Fuse ratings
Addendum 9
Name plate and safety label information
3
Table of contents
PUBLICATION INFORMATION ................................................................................................................................. 2
REVISIONS .............................................................................................................................................................. 2
TABLE OF CONTENTS .............................................................................................................................................. 3
AFFECTED INSTRUMENTS ....................................................................................................................................... 4
ADDITIONAL INFORMATION .................................................................................................................................. 4
ABBREVIATIONS ..................................................................................................................................................... 5
GENERAL ATTENTION ............................................................................................................................................. 5
SAFETY PRECAUTION UPDATES .............................................................................................................................. 6
NAME PLATES ................................................................................................................................................................ 7
SAFETY LABELS ............................................................................................................................................................... 8
Lasers ..................................................................................................................................................................... 9
FUSE RATINGS ........................................................................................................................................................ 9
Addendum 9
Name plate and safety label information
4
Affected instruments
System
Operator’s manual
publication version*
Addendum date
Change
description
cobas p 512
(SN 642xxxxx)
2.1
May 2020
Updated name
plates and safety
labels
* For US customers, this addendum is applicable to the currently approved version of the aforementioned
operator’s manual found on the US Roche Diagnostics website.
Table 1: Affected instruments
Roche recommends you familiarize yourself with the new and/or revised content provided
in this addendum.
If you print these pages, Roche recommends printing them single sided. In this way,
you can easily insert the new and/or revised content in its appropriate locations in
the existing document.
Additional information
The product has new:
Name plates: New name plates have been issued for all systems with serial numbers
starting, for example, 642xxxxx.
Safety labels: Safety labels have been added following current labelling and safety
concepts.
Addendum 9
Name plate and safety label information
5
Abbreviations
The following abbreviations are used throughout this document:
Abbreviation
Definition
CE
CE marking is a certification mark that indicates conformity with
health, safety, and environmental protection standards for products
sold within the European Economic Area (EEA)
cobas p 512
cobas p 512 pre-analytical system
ETL
Electrical Testing Laboratories
GS1
Global Support
GTIN
A Global Trade Item Number is a trade item identifier, developed by
GS1, used to look up product information in a database
IEC
International Electrotechnical Commission
PE
Protective earthing
RSR
Roche Service representative
Table 2: Abbreviations
General attention
General attention.
To avoid serious or fatal injury, ensure familiarization with the system
and safety information before use.
Pay attention to all safety precautions.
Always follow the instructions in this publication.
Always consult this publication when this symbol is shown in order to receive information
about the nature of potential hazards and the actions that are necessary to avoid them.
Do not use the system in a way that is not described in this publication.
Store all publications in a safe and retrievable place.
Addendum 9
Name plate and safety label information
6
Safety precaution updates
Pay attention to the following safety precautions!
To avoid serious or fatal injury, read and comply with the following
safety precautions.
Safety regulations IEC 61010-1 and the applicable national electrical
safety guidelines must be observed. Safe operation and reliability of
the system can only be ensured if:
The electrical installation of the system meets appropriate IEC requirements.
The detachable mains cable shall not be replaced with a mains cable that is
inadequately rated.
Note that only qualified personnel (for example, an electrician or the RSR) are
allowed to replace the mains fuse.
Prescribed installation is performed by a trained expert.
Visual inspection, PE conductor test, insulation test, and leakage current test are
carried out by qualified electrician if necessary (according to applicable safety
guidelines).
The system is operated in accordance with the operating instructions.
Addendum 9
Name plate and safety label information
7
Name plates
New name plates are required for all systems with serial numbers starting 642xxxxx.
Figure 1: Name plate
No.
Description
1
In vitro Diagnostic (IVD) system name
2
System reference (article) number (included in 5, barcode)
3
System serial number (included in 5, barcode)
4
Required voltage, frequency, and power consumption
5
Unique Device Identification (UDI) machine readable barcode
6
Roche Diagnostics GmbH registered addresses:
Mannheim: Legal Manufacturer
Indianapolis: US Distributor
7
Global Trade Item Number (GTIN) (included in 5, barcode)
8
Equipment de Laboratoire / Laboratory Equipment
9
CE certification mark
10
Intertek ETL Listed Mark
11
Label ID
12
Date of Manufacture (DoM) (included in 5, barcode)
Table 3: Name plate content description
This replaces the content on page A-13 of the Operator’s Manual.
Addendum 9
Name plate and safety label information
8
Safety labels
Safety labels are used to indicate potential safety hazards and point out remaining risk. All
safety labels on the module, and in areas accessible by the operator, are documented as
shown in the examples below.
This is in addition to the content on page A-11 of the Operator’s Manual.
Figure 2: Safety labels on the cobas p 512 protective cover
Figure 3: Biohazard label on the cobas p 512 protective cover
Addendum 9
Name plate and safety label information
9
Lasers
Be aware of the following safety labels for the barcode reader.
Figure 4: Barcode reader laser safety labels
Also be aware of the following safety label for the Laser LLD Unit, originally discussed in
Addendum 4: Safety label update in the Laser LLD unit.
Figure 5: Laser LLD unit laser safety label
Fuse ratings
The 100 V and 115 V fuse ratings on page F-6 of the Operator’s Manual have been
updated from T 10 to T 12.5, as shown below:
Fuse
230 V version
115 V version
100 V version
Fuse
(according to IEC 127-2)
T 6.3 AH; 250 V
T 12.5 AH; 250 V
T 12.5 AH; 250 V
Table 3: Fuse ratings
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Roche cobas p 512 LCP1 is a fully automated pre-analytical system that offers integrated and standardized sample preparation, centrifugation, aliquoting, and sample storage. It optimizes laboratory processes by helping you reduce hands-on time, improve traceability, and enhance laboratory safety. The system is designed to process a wide range of sample types, including blood, urine, and cerebrospinal fluid, and can be used in a variety of clinical applications, including routine chemistry, hematology, and urinalysis.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Roche cobas p 480 User manual
-
Roche cobas c 513 User manual
-
Roche cobas e 601 User manual
-
Roche cobas p 471 LCP1 User manual
-
Roche cobas p 671 LCP1 User manual
-
-
-
-
Roche cobas pro sample supply unit User guide
-
Roche cobas s 201 system User manual