Page is loading ...
PR-400 MI Set-Up Guide
*Note The modem can also function as a wireless Router
1
Overview of Modem Lights
2
Plug-in your PC
Step 1: Plug-in the Ethernet
cable (RJ-45)from your PC or
MAC into the LAN 1 port on
the NTT Router
Step 2:
Verify that the
Step 2:
Verify that the
connection on both ends
are connected
Step 3: Make sure that you
have the OCN username
and password that was sent
to you via e-mail.
(Without your
username and password, you cannot complete the
set-up process)
3
Launch your Browser
Step 1: Type “http://192.168.1.1” in your
web browser
Step 2: Press Enter or click here with your
mouse
mouse
Note: These steps will allow access
into the NTT Router
4
Enterlogin for router access
You will be prompted twice for a user name
and password.
Type in user (lower case) for the login and user
(lower case) for the password both times.
5
Configure PPPoE on the NTT Router
Step 1:
Make sure that you have the user name and
password that was sent to you available via
email
Step 2: In the top portion ISP1 will be
located in the first block
Step 3: Type in your PPPoE UserName
below ISP1
Step 4: Type in your 6 character
password in the block below
Step 5: Click the button below and the
modem will reboot
Step 6: Verify connectivity by typing in
your favorite website in the internet browser
6
Wireless Set-up for PR-400MI NTT Router
Step 1: Unplug the Ethernet cable from the modem
Step 2: Search for the wireless networks and look for the
SSID-1 (i.e. pr400mi-308c7f-1) of the NTT Router
Step 3:Locate the label on the back of the NTT Router that has
the MAC Address and SSID
the MAC Address and SSID
Step 4: Click on the SSID and it will prompt you for a
password
Step 6:Type in the MAC address of the NTT Router
Step 7: Test your wireless connection by trying to
connect to your favorite website and repeat steps 2-4 on your
other wireless devices for wireless connectivity.
7
/
