2. Allied Telesis
  3. PR-400 KI

Allied Telesis PR-400 KI Setup Manual

  • Hello! I am an AI chatbot trained to assist you with the Allied Telesis PR-400 KI Setup Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PR-400 KI Set-Up Guide
*Note The modem can also function as a wireless Router
1
Overview of Modem Lights
2
Step 1: Make sure that you have your user ID and password available before you start connection
procedures. Connect the LAN cable included with the HGW modem to the LAN port on your computer.
You can connect to any of the four LAN ports on the back on the HGW modem. The modem can be used
as a wireless Router. The modem Wi-Fi passcode is the MAC address located on the seal on the back of the
modem.
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Wi-Fi Passcode
Note: The below lamps on the Modem indicates a normal active status.
Direct Connect
afdc1e5595cae
Step 2: Open the web browser on the PC and type 192.168.1.1 in the URL field.
Step 3: Enter “user” in the Name field and “user” in the Password field (all lower caps) when the
login window appears and click Log In.
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Step 4: Do Not change the settings. The settings should be default.
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Step 5: Enter “ATCC” as ISP
name.
Step 6: Enter the USER ID
received from Allied Telesis.
Ensure the USER ID includes
“@one.ocn.ne.jp”
Step 7: Enter the Password
received from Allied Telesis
Step 8: Click the button and
unplug the Ethernet cable
ATCC
a9ijg3
Step 9
: Wait a few moments for the modem to automatically restart.
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Step 9
: Wait a few moments for the modem to automatically restart.
Step 10: After the router finishes re-booting you will see two SSIDs
associated with the NTT Wireless Router when you search for wireless
networks. Choose the NTT network (i.e.: PR 400KI -1) and type in the MAC
address (See Step 1 for Mac address location) to log into your new wireless
network.
Step 11: Repeat Step 10 for all other devices that you want to have
wireless internet access. Please enjoy your Internet experience.
/