urmet domus MT124-012 Technical Manual

Brand
urmet domus
Model
MT124-012
Category
Door intercom systems
Type
Technical Manual

urmet domus MT124-012 is a surface-mounted, modular door phone system designed for residential and small business use. It features a sleek and modern design with a vandal-resistant metal faceplate and backlit buttons. The system is expandable up to 128 users, with a maximum of 8 door stations and 128 indoor stations. Each door station can have up to 4 call buttons, while each indoor station can have up to 4 programmable buttons. The system also includes a built-in intercom function, allowing users to communicate between indoor stations.

urmet domus MT124-012 is a surface-mounted, modular door phone system designed for residential and small business use. It features a sleek and modern design with a vandal-resistant metal faceplate and backlit buttons. The system is expandable up to 128 users, with a maximum of 8 door stations and 128 indoor stations. Each door station can have up to 4 call buttons, while each indoor station can have up to 4 programmable buttons. The system also includes a built-in intercom function, allowing users to communicate between indoor stations.

Exigo
sec.3e
−−−−
1
DIGIVOICE - Technical Manual
ELECTRICAL AND MECHANICAL SPECIFICATIONS ...................2
HOW TO FORM THE PANEL CODE ...............................................2
DOOR PHONE DOOR UNIT Ref. 1038/62 ......................................3
Features........................................................................................3
Specications................................................................................3
Operation ......................................................................................4
Programming ................................................................................4
Errorsignals..................................................................................6
Troubleshootingandreplacement ................................................6
16-PUSHBUTTON EXPANSION MODULE Ref. 1038/17................6
Descriptionofterminals ................................................................6
Technicalspecications ................................................................6
TV CAMERA UNIT ...........................................................................7
Technicalspecications ................................................................7
Cameraunitassembly ..................................................................7
Cameralensdirectionadjustment ................................................8
PANELS FOR SINTHESI FLUSH-MOUNTING BOXES ..................8
Flush-mountingboxes ..................................................................9
Doorunitinstallationprocedure ..................................................10
Nametagback-lightingledfasteningprocedure ........................10
Nametagassemblyandfrontpanelfasteningprocedure ..........11
PANELS FOR DEDICATED FLUSH-MOUNTING BOXES ............ 11
Flush-mountingboxes ................................................................12
Doorunitinstallationprocedure ..................................................12
Nametagback-lightingledcircuitfasteningprocedure ..............13
Nametagassemblyandfrontpanelfasteningprocedure ..........13
DOOR PHONE SYSTEMS IN SINTHESI BOXES
Examplesofmodularconstructionswithvariouscapacities...........14
VIDEO DOOR PHONE SYSTEMS IN SINTHESI BOXES
Examplesofmodularconstructionswithvariouscapacities...........15
DOOR PHONE SYSTEMS IN DEDICATED BOXES
Examplesofmodularconstructionswithvariouscapacities...........16
VIDEO DOOR PHONE SYSTEMS IN DEDICATED BOXES
Examplesofmodularconstructionswithvariouscapacities...........17
SECTION 3E
Exigo
PANEL
Download from: www.urmetdomus.com Technical Manuals area.
SECTION CONTENTS
PANELS
EXIGO PANEL
Exigo
2
−−−−
sec.3e
DIGIVOICE - Technical Manual
HOW TO FORM THE PANEL CODE
Please provide a code formed as follows for ordering a customised
part:
EXAMPLE OF ENGRAVED FRONT PANEL
EXAMPLE OF NAME TAG CUSTOMISATION
1743 / /102 S 2 1 1
Front panel type:
1743 - video door phone in Sinthesi box
1143 - door phone in Sinthesi box
1721 - video door phone in dedicated box
1121 - door phone in dedicated box
Number of buttons
Front panel finish:
S - matte
L - polished
Number of engraved lines:
0 - none
1 - one line
2 - two lines
Engraved font:
0 - none
1 - SL43
2 - Aero
Plate type:
0 - brass, not engraved
1 - brass, engraved
2 - anthracite grey PVC
Basic code Customisation
PUSH BUTTON PANEL EXIGO
ELECTRICAL AND MECHANICAL SPECIFICATIONS
HOW TO FORM THE PANEL CODE
AERO FONT
SL43 FONT
PVC PLATE - SL43 FONT
BRASS PLATE - STENCIL FONT
PUSH BUTTON PANEL EXIGO
Exigo is the new, elegant and customisable, brass-plated Urmet
Domuspanel.
Aspecialspaceforanengravedplateisprovidedonthepanel.The
spacemaybeusedtotplateshowingthenameofthebuilding,the
address,thestreetnumberandotherinformation,ononeortwolines.
Twotypesoffontsmaybechosen.
Thebasicpanelissuppliedwithabrasspaneltobeengraved.Other
two options areavailable upon request:an engraved brass plate or
ananthracitegreyPVCplate.Youmaychoosewhatinformationtobe
writtenonthenametags(name,oor/apartmentnumber,etc.)andthe
numberoflines(1or2).
The name tags are backlit by a set of high-efciency white LEDs.
Thisfeaturemayalsobecustomisedby purchasingablueorgreen
colouredlm.
Polishedbrass-plateandmattebrass-platepanelsareavailable.The
systemissuitableforuseinbothdoorphoneandvideodoorphone
systems(colourorblackandwhite).
All parts of the front panel are treated by means of a ion plating
protectionprocess(PVD)tomakethemcorrosionandrustproof.The
panelsareparticularlyresistanttoweatherelements.
TheExigopanelsmaybeinstalledinSinthesiush-mountingboxesor
inspecicboxes.
Allversionsarecompletewith:
• LEDnametaglightingunit.
• Brass-platenametagstobeengraved.
• Tamperproofscrewsandscrewdriver.
• Drilling template for fastening the door unit (versions 1143 and
1743).
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
Frontprojectionfromwall: 17mm
Totalbuttonstroke: >4mm
Idlebuttonstroke: >2.4mm
Isolationvoltagebetweencontacts: 500Vac
Max.buttoncut-offcurrent: 2Aac
Nametaglighting: white LED diodes
Temporarynametags: Plexiglas
Max.wirecross-sectionareaforbuttonandlightterminals: 1.5mm
2
Corrosion: as per DIN 5342/64 standard
Testduration: 16 hours
Testtemperaturerange: 35°C
IMPORTANT:Cleanwithadry,softcloth.Donotusebrasspolish.
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
3
DIGIVOICE - Technical Manual
DOOR PHONE DOOR UNIT Ref. 1038/62
FEATURES
DigitizerRef.1038/62providesthefollowingfeatures:
• Doorphoneorvideodoorphonecalling(videocallingonlyifcombined
withdoorcameraunit).
• Automatic doorphone or video doorphone trafc management on
thebasisofthenumberofavailablevoicelines(1or2).
• Provisionforassigninganumericoralphanumericcodetocallkeys
(seeprogrammingnotes).Upto159,999differentcallcodescanbe
used.
• Basicmanagementof8directcallkeys.
• Provisionforincreasingthenumberofcallkeysuptoamaximum
of 96 additional keys (104 keys total) using Ref. 1038/17 16-key
expansion modules. A maximum of 6 expansion units can be
connectedtoeachdigitizervialoop-throughwiring.
• Relaytypedoor lock release(unrestrictedorprotectedby privacy
feature) with NC-C-NO outputs (30 V dc-ac 6A max) with timer
controlfrom0seconds(momentarytrigger)to30seconds.
• Provisionformanagingelectricsecuritylocks.
• Lobbyandpostalservicedoorlockreleasepushbuttoninput.
• Audibleelectricdoorlockactuationsignals.
• Ringingdurationprogrammablefrom1to5seconds.
• Distinctiveringing:continuous toneformaindigitizers, intermittent
toneforsecondarydigitizers.
• Audible‘callrouted’and‘callover’signals.
• Audibleservicesignalsadjustableinintensity.
• Door-opensensorinterface.
• Self-activationfunction,withnoneedfordedicatedwiring.
• Remote programming through bus connection with Ref. 1038/56
programmingterminal.
Thedigitizerconsistsofthefollowing:
1) Plastichousing.
2) Speakervolumecontrol.
3) Terminalblockforsystemconnections(MP1,MP2,MS).
4) Microphonevolumecontrol.
5) Terminalblockforconnecting8basickeys.
6) Terminalblockforlocalauxiliaryservices(MA)andvideosignals
(MV).
7) ProgrammingconnectorforRef.1038/56programmingterminal.
8) ConnectorforRef.1038/1716-keyexpansionmodules.
MV
MA
MT
MS
M
-ES
MP2
MP1
EXT
INT
Sch. 1038/62
Sett/Fab
S/N
PROG.
S
c
h
.
1
0
3
8
/6
2
S
e
tt/F
a
b
S
/
N
1
2
3
4
5
6
7
EXT
INT
Sch. 1038/62
Sett/Fab
S/N
8
10
9
9) Terminalblockforelectriclockconnection(M-ES).
10)Adhesivelabelsindicatingdigitizerdata,serialnumberandterminal
blockconnections.
DESCRIZIONE DEI MORSETTI
MP1- Main Voice Terminal Block 1
+V Powersupplypositive(+24V)
0V Powersupplyanddatalineground
D Data line
FA1 Outwardvoiceconductor1
FB1 Returnvoiceconductor1
MP2 - Main Voice Terminal Block 2
FA2 Outwardvoiceconductor2
FB2 Returnvoiceconductor2
+F Voicepowersupplypositive(+33V)
0F Voiceground
MS - Secondary Terminal Block
+V Powersupplypositive(+24V)
0V Powersupplyanddatalineground
D Data line
FA Outwardvoiceconductor
FB Returnvoiceconductor
MA - Auxiliary Terminal Block
0V Key/contact/pushbuttoncommon
PH Lobbydoorlockreleasepushbuttoninput
P Postalservicedoorlockreleasecontactinput
SP Doorsensorinput
MV - Video Terminal Block
+V Powersupply,Ref.1038/68videoentrancepanelrelay
SC Drive output, Ref. 1038/68 video entrance panel relay - riser
cable
SL Driveoutput,Ref.1038/68videoentrancepanelrelay-local
S12 Driveoutput,Ref.1038/68videoentrancepanelrelay-channels
1/2
S1 Driveoutput,Ref.1032/9videoentrancepanelrelay-channel1
S2 Driveoutput,Ref.1032/9videoentrancepanelrelay-channel2
0V Ground,Ref.1038/68relays
MT - Key Terminal Block
1 Basickey1
2 Basickey2
3 Basickey3
4 Basickey4
5 Basickey5
6 Basickey6
7 Basickey7
8 Basickey8
0V Keycommon
M-ES - Electric lock terminal block
NC Normallyclosedcontact
C Common
NO Normallyopencontact
SPECIFICATIONS
Intakeintermsofunitaryloads: 5UL
(includingexpansionmodules1038/17,wheretted)
Logic circuits
Logicpowervoltage(+V/0V): 15 ÷ 25.2Vdc
Stand-byintake: ~30mA
Callingintake: ~50mA
Voiceonintake: ~50mA
Intakeoftimedlockcircuitonly: ~20mA
Voice circuits
Voicepowervoltage(+F/0F): 30 ÷ 36Vdc
Stand-byintake: ~1mA
Voiceonintake: ~55mA
Relayenergisingoutput: NC-C-NO - Max 30Vac/dc 6A
Operatingtemperaturerange: from -10 to +50°C
PUSH BUTTON PANEL EXIGO
DOOR PHONE DOOR UNIT Ref. 1038/62
PANELS
EXIGO PANEL
Exigo
4
−−−−
sec.3e
DIGIVOICE - Technical Manual
OPERATION
CALLS
Callcanbemadetoupto104stationsbypressingthecorresponding
keysontheentrancepanelsassociatedwithdigitizerRef.1038/62.
Inaddition,theguarddoorswitchboardstation1038/40canbecalled
simply by pressing a call button with which the switchboard station
codehasbeenassociatedattheprogrammingstage.
The ringer at the called apartment station will be activated for the
programmedtime(from1to5seconds),withacontinuousringtone
(maindigitizer)oranintermittenttone(secondarydigitizer).
Three audible beeps will conrm that the call has been forwarded.
Pressingthecallbuttonagainwillextendtheringeractivationtime.
CALL CODES ASSIGNED TO PUSHBUTTONS
A numeric or alphanumeric code between 0000 and JJJJ can be
assignedtoeachcallbutton.
These codes identify the doorphone or video doorphone apartment
stationthatwillbecalledwhenthebuttonispressed.
Callcodesfortheguarddoorswitchboardstationcanalsobeassigned
tobuttons.
PROGRAMMING
PROGRAMMING METHODS
The digitizer can be programmed only by means of programming
terminal Ref. 1038/56.
Theterminalcanbeconnectedeither:
• Locally, to programming connector (7) located on the side of the
digitizertobeprogrammed.
• To any other entrance module, guard door switchboard station or
digitizerinthesystem.
• To any passive wiring block (Ref. 1038/90) connected to the
system.
PARAMETERS
Datatobeprogrammedareasfollows:
TYPE OF DIGITIZER STATION
This step is used to select operating mode. The digitizer can be
conguredasamainorsecondarystation.
If congured as the main station, the digitizer can send calls to
apartmentstationsintherangebetween0andJJJJ.Ifconguredas
asecondarystation,thedigitizercansendcallstoapartmentstations
onitsownrisercable.
DIGITIZER STATION NUMBER
Whether congured as main or secondary, each digitizer station is
identiedbyanumber.However,thenumbersthatcanbeassignedto
adigitizerstationwilldependonthelatter’stypeasfollows.
Maindigitizerstationscanbeassignednumbersfrom1toJJJ,while
secondarydigitizerstationscanbeassignednumbersfrom1toJJ.For
secondarystations,thenumberidentiesthedigitizer’srisercable.
ENGAGED TIME
Theprogrammedengagedtimeestablishestheminimumdurationofa
voicecommunicationfromthemomentthecallismade.
Thesamevaluemustbeprogrammedforallcallingdevices,andmay
be10,20,30or40s.
ELECTRIC LOCK MANAGEMENT CRITERIA
Doorlockreleasemaybeunrestrictedorprotectedbyprivacyfeature.
Operationwilldependonthetypeofdigitizerstationasfollows:
• Main station:Ifthedoorlockreleaseisunrestricted,thedigitizer
opens the door in response to commands received from any
decoder.Ifthedoorlockreleaseisprotectedbyprivacyfeature,the
digitizerwillopenthedooronlyinresponsetocommandsreceived
fromthedoorphonebranchwithwhichacallisinprogress.
• Secondary station: If the door lock release is unrestricted, the
digitizer opens the door in response to commands received from
anydecoderonitsrisercable.Ifthedoorlockreleaseisprotected
byprivacyfeature,thedigitizerwillopenthedooronlyinresponse
tocommandsreceivedfromthedoorphonebranchwithwhichacall
isinprogress.
The foregoing description does not apply to door lock release
commandsreceivedfromtheswitchboard.Insuchcases,thedigitizer
willopenthedoorregardlessofstationtype.
DOOR LOCK RELEASE TIME
The programmed doorlock release time establishes theduration of
electricdoorlockrelayactivation.Thistimemaybe0to30seconds,
where0meansthattherelayisexcitedbyasinglepulse.
RING DURATION
The length of time that a doorphone will ring (or the guard door
switchboard station when called by a main digitizer) will depend on
howthecallingdigitizerisprogrammed.Ringdurationcanbe1to5
seconds.
NUMBER OF VOICE LINES
Oneortwoindependentvoicelinesmaybephysicallypresentbetween
mainandsecondarydigitizers.Ifthereisonlyoneline,thedigitizerwill
necessarilyusethischannel.
BUZZER VOLUME SETTING
Volumeofthedigitizersignalingbuzzercanbesettothreelevels:low
(notoff),mediumandhigh.
CALL BUTTON PROGRAMMING
Eachof the 104 pushbuttonsthatcan be connected tothe unit can
beassociatedwithausercodebetween0andJJJJ,independentlyof
digitizercodeandtype.
DEFAULT PROGRAMMING
Defaultparametersforthedeviceareasfollows:
DIGITIZER TYPE MAIN
DIGITIZER STATION CODE JJJ
ENGAGED TIME 20 seconds
ELECTRIC LOCK MANAGEMENT CRITERION
PROTECTED BY PRIVACY FEATURE
DOOR LOCK RELEASE TIME 0 seconds
RING DURATION 3 seconds
NUMBER OF VOICE LINES 1
BUZZER VOLUME SETTING MEDIUM
DIGITIZER ID “........... STREET”
CALL BUTTONS rrrr (private code)
PROGRAMMING WITH TERMINAL 1038/56
Programmingbymeansoftheterminalmustbeperformedwiththe
systemon.
Terminal rmware release must be 2.0 or higher.
• Turn on the terminal, holding down the ‘ON’ key for at least 3
seconds.
• Plug the programming cord into the associated socket (7) or,
alternatively,intoanotherentrancemodule,guarddoorswitchboard
station or passive wiring block. The terminal willautomatically be
connectedtothedataline,andthedisplaywillshowthefollowing
messagefor3seconds:
PUSH BUTTON PANEL EXIGO
DOOR PHONE DOOR UNIT Ref. 1038/62
Programming
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
5
DIGIVOICE - Technical Manual
Thiswillbefollowedby:
• Selecttheoption<SerialNumber>.Thedisplaywillshow:
Type in the digitizer serial number shown on the labels (10)
alongsidethedesignationS/Nandpress↵.Thedisplaywillshow:
At this point, the terminal is logically connected to the digitizer
(DIG)whichhastheselectedserialnumber(‘uvwxyz’).Thedigitizer
buzzerwillemitaseriesofthreebeepstoindicatethatthedigitizer
isin‘Maintenance’status.
In ‘Maintenance’ status, the digitizer will continue to control the
electric lock when the lobby pushbutton or postal service door
lock release contact is actuated.
• Digitizercongurationparameterscannowbeprogrammed.These
parametersareshownonsixscreenpages:
(Page1:Devicedetected(DIG)andSerialNumber,neitherofwhich
canbechanged;Installationsite)
(Page2:Type,Code,EngagedTime,LockManagement)
(Page3:RingDuration,NumberofLines,BuzzerVolume)
• Use the ←and→keystomovetothedesiredparameters,program
bymeansofthealphanumerickeys,andpress↵toconrm.
• Press‘Esc’toviewthenextpage.
• Movethecursorto<Program>andpress↵.Theterminalwillwrite
programmeddatainthedigitizermemoryanddisplaytheoutcome
ofthewriteoperation.
(Page4:Digitizerpushbuttoncodeprogramming)
• With the cursor on <Buttons> press ↵ to go on to the basic and
additionalpushbuttonprogrammingpage.
(Page5:Basicpushbuttoncodeprogramming)
(Page6:Expansionmodulepushbuttoncodeprogramming)
• Here,‘PE-0y:xxxx’isbasickeynumber‘y’(1-8)withcodexxxx.
• ‘Ez-yy:xxxx’Thisiskey‘yy’(1to16)onexpansionmodulenumber
‘z’(1to6)withcodexxxx.
• Select<P>togobacktothepreviouspushbuttonscreenpage.
• Select<S>togoontothenextpushbuttonscreenpage.
• Select <OK> to program data shown on each individual screen
page.
WARNING: Remember to select <OK> after programming each
screenpage,asotherwisethedataenteredinthescreenpagewill
belost.
• A programmed code can only be deleted by overwriting it with a
codethatdoesnotexistinthesystem(e.g.,‘JJJJ’).
• After programming keys, move the cursor to <ESC> and press
Enter.Thenselect<Exit>andpress↵.Atthispoint(andONLYat
this point), the digitizer will exit from the maintenance status and
returntonormaloperation.
•Disconnect the programming cord and turn off the terminal by
holding down the ‘OFF’ key for at least 3 seconds, or, if further
digitizersconnectedtothesystemaretobeprogrammed,repeatthe
stepsdescribedabove.
PUSH BUTTON PANEL EXIGO
DOOR PHONE DOOR UNIT Ref. 1038/62
Searchby:
<SerialNumber>
<Type>
<Acquisition>
Serialnumber:
000000
DIGSN:uvwxyz
- - - - - - - - - - - - - - - -
Street. . . . . . . . . . .
DIGSN:uvwxyz
- - - - - - - - - - - - - - - -
Street. . . . . . . . . . .
Type:PCod:001
- - - - - - - - - - - - - - - -
Busy:10s
Opener: S-00 s
Call: 03 s
Lines: 1
Buzzer:2
<Buttons>
<Cancel>
<Program>
<Quit>
<Buttons>
<Cancel>
<Program>
<Quit>
PE-01:xxxx
PE-02:xxxx
PE-03:xxxx
<P><S><OK><ESC>
PE-07:xxxx
PE-08:xxxx
E1-01:xxxx
<P><S><OK><ESC>
PANELS
EXIGO PANEL
Exigo
6
−−−−
sec.3e
DIGIVOICE - Technical Manual
16-PUSHBUTTON EXPANSION MODULE
Ref. 1038/17
Theextensionmodulecanbeusedtoadd16userbuttonstothedoor
unit.
Positionthedeviceinthepanelsasshownintheguresbelowunder
theLEDcircuitsforlightingthenametags.
Connect the user buttons and connect the device to the door unit
and to other extensions bymeans ofthe specic wire. Respect the
connections.
DESCRIPTION OF TERMINALS
C Electricalreferenceearthforbuttons1-8
P1...P8 Userbuttons
C Electricalreferenceearthforbuttons9-16
P9..P16 Userbuttons
TECHNICAL SPECIFICATIONS
Consumption: 1mA Max
Currentinuserbutton:  ~1mA
Workingtemperaturerange: +0°C - +50°C
Humidity: 90% RH at 30°C
SPEAKER VOLUME ADJUSTMENT
Voice levels at entrance panel and to apartment stations are set to
mediumatthefactory.Ifvolumerequires adjustment,doso usinga
screwdriverappliedtovolumecontrols(2)and(4).
ERROR SIGNALS
Thebuzzersignalsdifferenttypesoferror.
TROUBLESHOOTING AND REPLACEMENT
ELECTRIC LOCK
Iftheelectriclockfailstoopen,thecausecanbereadilyidentiedas
follows:
• Ifthedigitizeremitsanaudiblesignalbuttheelectriclockdoesnot
open,theproblemisinthelinebetweenthedigitizerandtheelectric
lock,orinthecontrolrelay.
• Ifthedigitizerdoesnotopentheelectriclockandalsofailstoemit
anaudiblesignal,thedoorlockreleasecommanddoesnotreach
thedigitizer:theproblemisontheapartmentstationside.
REPLACEMENT PROCEDURE
Replacethedigitizerintheeventofmalfunction.
If a large number of keys have been programmed, the integrated
circuitinwhichthecodesarestoredcanberemovedandinstalledin
anewdigitizer.
• Turnoffpowersupplytotheolddigitizer1038/62.
• Take off the top cover, backing off the two retaining screws and
pressinglightlyonthetwoclips.
• Removeintegratedcircuitfromsocket.
• Takethetopcoveroffthenewdigitizerandreplacethecorresponding
integratedcircuit, taking caretoorient it in therightdirection (the
integratedcircuitpintowhichtheshieldingwireissolderedmustface
towardstheterminalblock,andnottowardsthemicroprocessor).
• Reinstallcover.
• NOTICE: After replacing the memory chip, the serial number
of the new digitizer will automatically become that of the old
digitizer. Change the serial number shown on the labels (10) by
hand.
• Supplypowertothenewdigitizer.
Provided with
the door unit
Sch. 1038/17
OUTPUT INPUT
Sch. 1038/17
OUTPUT INPUT
MV
MA
MT
MS
M-
E
S
MP2
MP1
EXT
INT
Sch. 1038/62
Sett/Fab
S/N
PROG.
INPUT
Sch. 1038/17
PUSH BUTTON PANEL EXIGO
16-PUSHBUTTON EXPANSION MODULE Ref. 1038/17
Interpretation
Deviceoperative
Datalinenotsupplied
Decoder nonexistent, call from
secondarydigitizertodecoderon
otherrisercable,
orpushbuttonnotprogrammed
No EEPROM or EEPROM with
wrong
serialnumberfordevice
EEPROMCKSerror
Signal
3beepsatactivation
6beepsevery3seconds
6beeps
Continuousbeepuntila
keyispressed(device
remainsINOPERATIVE)
Beepfor5seconds
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
7
DIGIVOICE - Technical Manual
TV CAMERA UNIT
Easytoinsertandextractfromthefrontofthepanel,twomodelsofthe
cameraunitareavailable:
• Colours Ref. 1810/40
• Black/white Ref. 1810/70
Thecameraunitsareprovidedwith:
• Fixedfocuscamerawithbuilt-inopticsandshutter.
• Possibilityofadjustingcameralensverticallyandhorizontally.
• SetofinfraredLEDsforilluminatingthesubject.
• Extractableconnectionterminalboard.
TECHNICAL SPECIFICATIONS
Common features:
Lens: standard
Shutter: standard
Focus: xed
Minimumlightforacceptablepictures: 0,2 Lux min
Coaxvideooutput: 1Vpp composite
Frequency: CCIR 50Hz
Operatingtemperaturerange: -5 ÷ 50°C
Features Ref. 1810/40
Powervoltage: 13 ÷ 26 Vcc
Maximumuptake: 120 Max
Imagesensor: CCD 1/4”
Features Ref. 1810/70
Powervoltage: 18Vcc
Maximumuptake: 300mA Max
Imagesensor: CCD 1/3”
CAMERA UNIT ASSEMBLY
Proceedasfollowsforxingthecameraunittothefrontpanel:
1. Extracttheconnectorfromthecamerabody.
2. Loosenthecamerafasteningscrew.
3. RemovetheLEDcircuitfromtheplasticfrontpanel.
4. Removethecamerafromtheplasticfrontpanel.
5. FastentheLEDcircuittotheExigofrontpanel.
6. FitthecameraontheExigofrontpanel.
2
A
B
C
4
3
A
B
6
5
PUSH BUTTON PANEL EXIGO
TV CAMERA UNIT
PANELS
EXIGO PANEL
Exigo
8
−−−−
sec.3e
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
PANELS FOR SINTHESI FLUSH-MOUNTING BOXES
7. Fastenthecamerafasteningscrew.
8. Connectortheconnectortothecamerabody.
DESCRIPTION OF TERMINAL BOARDS
T Cameraoncontrolindigitalsystems
R2 Camerapowerpositiveindigitalsystems
+TC Camerapowerpositiveinanalogicsystems
R1 Camerapowernegative
V5/BVideosignalearth
V3/AVideosignal
CAMERA LENS DIRECTION ADJUSTMENT
WiththisTVcameraunit,itispossibletoadjustthedirectionoftheTV
cameralensinsideitusingthespecicadjustmentscrewsAandBin
ordertoovercomeanyinstallationaws.
Theadjustmentalongtheverticalaxisinrelationtothepositionsetis
10°upand20°down.
Adjustmentalongthehorizontalaxisinrelationthepositionsetis10°
inbothdirections(left-right).
Orientation along the vertical axis
TurningscrewA:
• Inaclockwisedirection(totheright)movesthepick-upeldtowards
thetopofthescreen.
• Inacounterclockwisedirection(totheleft)movesthepick-upeld
towardsthebottomofthescreen.
Orientation along the horizontal axis
TurningscrewB:
• Inaclockwisedirection(totheright)movesthepick-upeldtowards
the left the screen.
• Inacounterclockwisedirection(totheleft)movesthepick-upeld
towardstherightofthescreen.
IMAGING ANGLES
PANELS FOR SINTHESI FLUSH-MOUNTING
BOXES
Thisrangeofpanelsissuitableforinstallationinsystemsfrom1to10
users.Sinthesiush-mountingboxesadaptedbymeansofaspacer
areused.
Thefrontpanelsarearrangedfordoorunitinstallation.Thefollowing
modelsareavailable:
Door phone panels
with3callingbuttons ......................................................Ref. 1143/103
with4callingbuttons ......................................................Ref. 1143/104
with5callingbuttons ......................................................Ref. 1143/105
with6callingbuttons ......................................................Ref. 1143/106
with7callingbuttons ......................................................Ref. 1143/107
with8callingbuttons ......................................................Ref. 1143/108
with9callingbuttons ......................................................Ref. 1143/109
with10callingbuttons ....................................................Ref. 1143/110
Video door phone panels
with3callingbuttons ......................................................Ref. 1743/103
with4callingbuttons ......................................................Ref. 1743/104
with5callingbuttons ......................................................Ref. 1743/105
with6callingbuttons ......................................................Ref. 1743/106
with7callingbuttons ......................................................Ref. 1743/107
with8callingbuttons ......................................................Ref. 1743/108
with9callingbuttons ......................................................Ref. 1743/109
with10callingbuttons ....................................................Ref. 1743/110
Fillintheorderformandspecifytherequiredcustomisationsbyusing
thecompletecodeformedasexplainedinthe“Howtoformthepanel
code”paragraph.
7
8
A
B
50
0
50
2
21
33
-50
-24
-14
22,5
-48,5
34
-34
48,5
-22,5
HORIZONTAL
VERTICALMeasurements in centimetres
+10°
+10°
0
-20°
-10°0
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
9
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
PANELS FOR SINTHESI FLUSH-MOUNTING BOXES
FLUSH-MOUNTING BOXES
A different box than shown in the following table must be used
accordingtothepanelmodeltobeinstalled:
Systemwiresleadintotheboxesthroughtheopeningsonthesides
andbottomofthebox.
Allopeningsareshutbyremovableclosures.
FLUSH-MOUNTING BOXES JOINING PROCEDURE
Two fairlead spacers for joining the boxes are provided with ush-
mountingboxesRef.1145/52-/53-/54modules.
Allthespacersarehollowtoallowthepassageofwiresfromonebox
totheother.
FLUSH-MOUNTING BOX INSTALLATION PROCEDURE
ThespacerRef.1143/60mustbexedtoeachoftheush-mounting
boxes.
A standard sized spacer is provided. For ush-mounting boxes
Ref.1145/52orRef.1145/53,breakthespaceralongthepre-cutting
forcorrectassembly.
ScrewsA(3.5x16mm)areprovidedwiththespacer.
The box and spacer must be installed ush with the wall without
protrudingataheightofapproximately1.55÷1.60mfromtheoor.
Theush-mountingdepthofallboxesisequalto60mm(45mmforthe
box+15mmforthespacer).
Flush-mounting box codeFront panel code
Ref. 1143/102
Ref. 1143/101
Ref. 1743/102
Ref. 1743/101
Ref. 1143/108
Ref. 1143/107
Ref. 1143/110
Ref. 1143/109
Ref. 1143/104
Ref. 1143/103
Ref. 1143/106
Ref. 1143/105
Ref. 1743/104
Ref. 1743/103
Ref. 1743/106
Ref. 1743/105
Ref. 1743/108
Ref. 1743/107
Ref. 1743/110
Ref. 1743/109
Ref. 1145/52
Ref. 1145/53
2 x Ref. 1145/52
2 x Ref. 1145/53
Ref. 1145/53
Ref. 1145/54
2 x Ref. 1145/53
A
Ref. 1143/60
Ref. 1143/60
Flush-mounting box
60 mm
PANELS
EXIGO PANEL
Exigo
10
−−−−
sec.3e
DIGIVOICE - Technical Manual
SINGLE LED CIRCUIT
MULTIPLE LED CIRCUIT
PUSH BUTTON PANEL EXIGO
PANELS FOR SINTHESI FLUSH-MOUNTING BOXES
DOOR UNIT INSTALLATION PROCEDURE
Do not t the microphone seal provided with the door unit.
NAME TAG BACK-LIGHTING LED FASTENING
PROCEDURE
Usethetemplateprovidedwiththefrontpaneltofastenthenametag
lightingLEDs.Cutalltheush-mountingboxcolumnsshownby
,andthendrillatthepointsindicatedby .
Fixthespacerstotheush-mountingboxandxtheLEDcircuittothe
spacers.
3 x 16mm provided
with the front panel,
DO NOT use those
provided with
the door unit
TEMPLA
TE
2,9 x 6,5mm
2,9 x 6,5mm
2,9 x 9,5mm
2,9 x 9,5mm
2,9 x 9,5mm
2,9 x 6,5mm
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
11
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
PANELS FOR DEDICATED FLUSH-MOUNTING BOXES
NAME TAG ASSEMBLY AND FRONT PANEL
FASTENING PROCEDURE
Exigopanelsareprovidedwithabrassnametag(notengraved)which
maybereplacedbyanengravedbrassnametagorananthracitegrey
PVCnametag.
Colouredlm(eachboxcontains5piecesintwocolours)maybeused
tocustomisethecolourofthebacklighting:
• Blue Ref. 1143/51
• Green Ref. 1143/52
Proceedasshowninthefollowingdrawingsforttingthecolouredlm
andthenametags.
Close the panel front using the tamperproof screws provided at the
endoftheoperations:
Brass plate
Opalescent plate
Possible coloured film
(not included)
Fastening nuts
Opalescent plate
Fastening nuts
Temporarily transparent
(or grey PVC) name tag
Glass
Possible coloured film (not included)
PANELS FOR DEDICATED FLUSH-MOUNTING
BOXES
Thispanelrangeisdesignedforuseinsystemsfrom3to20users.
Dedicatedush-mountingboxesareused.
Thefrontpanelsarearrangedfordoorunitinstallation.Thefollowing
modelsareavailable:
Door phone panels with 1 row of buttons
with3callingbuttons ......................................................Ref. 1121/103
with4callingbuttons ......................................................Ref. 1121/104
with5callingbuttons ......................................................Ref. 1121/105
with6callingbuttons ......................................................Ref. 1121/106
Door phone panels with 2 rows of buttons
with4callingbuttons ......................................................Ref. 1121/204
with6callingbuttons ......................................................Ref. 1121/206
with8callingbuttons ......................................................Ref. 1121/208
with10callingbuttons ....................................................Ref. 1121/210
with12callingbuttons ....................................................Ref. 1121/212
with14callingbuttons ....................................................Ref. 1121/214
with16callingbuttons ....................................................Ref. 1121/216
with18callingbuttons ....................................................Ref. 1121/218
with20callingbuttons ....................................................Ref. 1121/220
Video door phone panels with 1 row of buttons
with3callingbuttons ......................................................Ref. 1721/103
with4callingbuttons ......................................................Ref. 1721/104
with5callingbuttons ......................................................Ref. 1721/105
with6callingbuttons ......................................................Ref. 1721/106
Video door phone panels with 2 rows of buttons
with4callingbuttons ......................................................Ref. 1721/204
with6callingbuttons ......................................................Ref. 1721/206
with8callingbuttons ......................................................Ref. 1721/208
with10callingbuttons ....................................................Ref. 1721/210
with12callingbuttons ....................................................Ref. 1721/212
with14callingbuttons ....................................................Ref. 1721/214
with16callingbuttons ....................................................Ref. 1721/216
with18callingbuttons ....................................................Ref. 1721/218
with20callingbuttons ....................................................Ref. 1721/220
Fillintheorderformandspecifytherequiredcustomisationsbyusing
thecompletecodeformedasexplainedinthe“Howtoformthepanel
code”paragraph.
PANELS
EXIGO PANEL
Exigo
12
−−−−
sec.3e
DIGIVOICE - Technical Manual
FLUSH-MOUNTING BOXES
A different box than shown in the following table must be used
accordingtothepanelmodeltobeinstalled:
Theushingdepthforallboxesis55mm.
Systemwiresleadintotheboxesthroughtheopeningsonthebottom
ofthebox.
Allopeningsareshutbyremovableclosures.
FLUSH-MOUNTING BOX INSTALLATION PROCEDURE
Applyadhesivelabelstoprotectthefrontpanelfasteningholesduring
theembeddingoperation.
Thebox mustbeinstalledushwiththewallwithoutprotrudingata
heightofapproximately1.55÷1.60mfromtheoor.
Thewallsurfacemustbeat.Maximumpermittedtolerance=1.5mm.
DOOR UNIT INSTALLATION PROCEDURE
2 ROWS OF BUTTONS
PUSH BUTTON PANEL EXIGO
PANELS FOR DEDICATED FLUSH-MOUNTING BOXES
1,55 ÷ 1,60m
max
3 mm.
3,5 x 8mm
provided with
the door unit
Front panel code Flush-mounting Dimensions of
box code ush-mounting box
Ref.1121/103 Ref.1121/53 110x256mm
Ref.1121/104 Ref.1121/54 110x284mm
Ref.1121/105 Ref.1121/55 110x312mm
Ref.1121/106 Ref.1121/56 110x340mm
Ref. 1121/204
Ref. 1121/60
186x228mm
Ref. 1121/206
Ref. 1121/208
Ref. 1121/62
186x284mm
Ref. 1121/210
Ref.1121/212 Ref.1121/64 186x312mm
Ref.1121/214 Ref.1121/65 186x340mm
Ref.1121/216 Ref.1121/66 186x368mm
Ref.1121/218 Ref.1121/67 186x396mm
Ref.1121/220 Ref.1121/68 186x424mm
Ref.1721/103 Ref.1721/53 110x340mm
Ref.1721/104 Ref.1721/54 110x368mm
Ref.1721/105 Ref.1721/55 110x396mm
Ref.1721/106 Ref.1721/56 110x424mm
Ref.1721/204 Ref.1721/60 186x312mm
Ref.1721/206 Ref.1721/61 186x312mm
Ref.1721/208 Ref.1721/62 186x340mm
Ref.1721/210 Ref.1721/63 186x368mm
Ref.1721/212 Ref.1721/64 186x396mm
Ref.1721/214 Ref.1721/65 186x424mm
Ref.1721/216 Ref.1721/66 186x452mm
Ref.1721/218 Ref.1721/67 186x480mm
Ref.1721/220 Ref.1721/68 186x508mm
PANELS EXIGO PANEL
Exigo
sec.3e
−−−−
13
DIGIVOICE - Technical Manual
1 ROW OF BUTTON
Fit the seals provided with the door unit.
NAME TAG BACK-LIGHTING LED CIRCUIT
FASTENING PROCEDURE
ProceedasfollowstofastenthenametaglightingLEDs:
Fixthespacerstotheush-mountingboxandxtheLEDcircuittothe
spacers.
PUSH BUTTON PANEL EXIGO
PANELS FOR DEDICATED FLUSH-MOUNTING BOXES
3,5 x 8mm
provided with
the door unit
3,5 x 8mm
provided with
the door unit
NAME TAG ASSEMBLY AND FRONT PANEL
FASTENING PROCEDURE
Exigopanelsareprovidedwithabrassnametag(notengraved)which
maybereplacedbyanengravedbrassnametagorananthracitegrey
PVCnametag.
Colouredlm(eachboxcontains5piecesintwocolours)maybeused
tocustomisethecolourofthebacklighting:
• Blue Ref. 1143/51
• Green Ref. 1143/52
Proceedasshowninthefollowingdrawingsforttingthecolouredlm
andthenametags.
Close the panel front using the tamperproof screws provided at the
endoftheoperations:
2,9 x 6,5mm
3 x 6mm Fasten screw on
the flush-mounting box
3 x 6mm
Fasten screw on
the flush-mounting box
Brass plate
Opalescent plate
Possible coloured film
(not included)
Fastening nuts
Opalescent plate
Fastening nuts
Temporarily transparent
(or grey PVC) name tag
Glass
Possible coloured film (not included)
PANELS
Exigo
14
−−−−
sec.3e
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
DOOR PHONE SYSTEMS IN SINTHESI BOXES
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
BUTTONS NUMBER
BUTTONS NUMBER
FRONT
1143/101
1143/103
1143/102
1143/104
1143/105
1143/107
1143/108
1143/110
1143/109
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1143/106
1
1
1
1
1
1
1
1
1
1
DOOR UNIT
EXPANSION MODULE
SPACER
FLUSH-
MOUNTING
1038/62
1038/17
1 1
1 1
11 11 11
22
1
2 2
1
11 11
222 211 11
1145/51
1145/53
1145/52
1143/60
7 1098
3 4 5 6
11
1 2
PUSH BUTTON PANEL EXIGO - DOOR PHONE SYSTEMS IN SINTHESI BOXES
PANELS
Exigo
sec.3e
−−−−
15
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
VIDEO DOOR PHONE SYSTEMS IN SINTHESI BOXES
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
BUTTONS NUMBER
BUTTONS NUMBER
FRONT
1743/101
1743/103
1743/102
1743/104
1743/105
1743/107
1743/108
1743/110
1743/109
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1743/106
1
1
1
1
1
1
1
1
1
(#) alternatives
1
DOOR UNIT
EXPANSION MODULE
TV CAMERA UNIT
COLOURS (#)
SPACER
FLUSH-
MOUNTING
1038/62
1810/40
1 1
1 1
1 1
222 2
1038/17
11 11 1111
1 1 11 11 1111
1 1 11 11 1111
11 11
222 211 11
1145/54
1145/52
1145/53
1143/60
TV CAMERA UNIT
B/W (#)
1810/70
3 4 5 6
7 8 109
11
21
PUSH BUTTON PANEL EXIGO - VIDEO DOOR PHONE SYSTEMS IN SINTHESI BOXES
PANELS
Exigo
16
−−−−
sec.3e
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
DOOR PHONE SYSTEMS IN DEDICATED BOXES
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
16 18 20
16 18 20
BUTTONS NUMBER
BUTTONS NUMBER
1 row 2 rows
FRONT
1121/103
1121/105
1121/104
1121/106
1121/204
1121/208
1121/210
1121/214
1121/212
1121/216
1121/218
1121/220
3 4
1 row 2 rows
5 6 4 6 8 10 12 14
3 4 5 6 4 6 8 10 12 14
1121/206
1
1
1
1
1
1
1
1
1
1
111
1
1
1
DOOR UNIT
FLUSH-
MOUNTING
1038/62 1 1 11 11
1
111
1
1
1121/53
1121/55
1121/54
1121/56
1121/60
1121/62
1121/65
1121/64
1121/66
1121/67
1121/68
1
1
1
1
1
1
1
1
1
1
1
12 20181614
111EXPANSION MODULE 1038/17 111
3 54 6 4 6 8 10
PUSH BUTTON PANEL EXIGO - DOOR PHONE SYSTEMS 4+n IN DEDICATED BOXES
PANELS
Exigo
sec.3e
−−−−
17
DIGIVOICE - Technical Manual
PUSH BUTTON PANEL EXIGO
VIDEO DOOR PHONE SYSTEMS IN DEDICATED BOXES
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
16 18 20
16 18 20
BUTTONS NUMBER
BUTTONS NUMBER
1 row 2 rows
FRONT
1721/103
1721/105
1721/104
1721/106
1721/204
1721/208
1721/210
1721/214
1721/212
1721/216
1721/218
1721/220
3 4
1 row 2 rows
5 6 4 6 8 10 12 14
3 4 5 6 4 6 8 10 12 14
1721/206
1
1
1
1
1
1
1
1
1
1
111
1
1
1
3 4 5 6 4 6 8
(#) alternatives
1
DOOR UNIT
TV CAMERA UNIT
COLOURS (#)
FLUSH-
MOUNTING
1038/62
1810/40
1 1 11 11 1
111
111
111
1 1 11 11
1
111
1 1 11 11 111
TV CAMERA UNIT
B/W (#)
1810/70
1721/53
1721/55
1721/54
1721/56
1721/60
1721/62
1721/63
1721/65
1721/64
1721/66
1721/67
1721/68
1721/61
1
1
1
1
1
1
1
1
1
1
1
1
1
10 2018161412
111EXPANSION MODULE 1038/17 111
PUSH BUTTON PANEL EXIGO - VIDEO DOOR PHONE SYSTEMS IN DEDICATED BOXES
Exigo
18
−−−−
sec.3e
DIGIVOICE - Technical Manual
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

urmet domus MT124-012 Technical Manual

Brand
urmet domus
Model
MT124-012
Category
Door intercom systems
Type
Technical Manual

urmet domus MT124-012 is a surface-mounted, modular door phone system designed for residential and small business use. It features a sleek and modern design with a vandal-resistant metal faceplate and backlit buttons. The system is expandable up to 128 users, with a maximum of 8 door stations and 128 indoor stations. Each door station can have up to 4 call buttons, while each indoor station can have up to 4 programmable buttons. The system also includes a built-in intercom function, allowing users to communicate between indoor stations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents