LIXiSE ATS106 is an Automatic Transfer Switch Control Module that can be used to control a generator and automatically switch between mains power and generator power in case of a power outage. The module features two isolable N designed inputs for mains and generator AC input, and two relay outputs for close mains and close generator. The module also has a relay output for start generator, which can be used to control a generator to start when mains AC supply failure is detected.
The module has two states: MANUAL state and AUTO state. In MANUAL state, the user can manually control the close mains and close generator relays by pressing the corresponding buttons on the front panel. In AUTO state, the module will automatically switch between mains power and generator power based on the state of the mains and generator AC inputs.
LIXiSE ATS106 is an Automatic Transfer Switch Control Module that can be used to control a generator and automatically switch between mains power and generator power in case of a power outage. The module features two isolable N designed inputs for mains and generator AC input, and two relay outputs for close mains and close generator. The module also has a relay output for start generator, which can be used to control a generator to start when mains AC supply failure is detected.
The module has two states: MANUAL state and AUTO state. In MANUAL state, the user can manually control the close mains and close generator relays by pressing the corresponding buttons on the front panel. In AUTO state, the module will automatically switch between mains power and generator power based on the state of the mains and generator AC inputs.
LIXiSE ATS106 is an Automatic Transfer Switch Control Module that can be used to control a generator and automatically switch between mains power and generator power in case of a power outage. The module features two isolable N designed inputs for mains and generator AC input, and two relay outputs for close mains and close generator. The module also has a relay output for start generator, which can be used to control a generator to start when mains AC supply failure is detected.
The module has two states: MANUAL state and AUTO state. In MANUAL state, the user can manually control the close mains and close generator relays by pressing the corresponding buttons on the front panel. In AUTO state, the module will automatically switch between mains power and generator power based on the state of the mains and generator AC inputs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI