Zipy GO EarAir User manual

EARAIR

Bluetooth stereo headset

User’s guide

1

Contents



Brief introduction……………………………………………………2

1. Bluetooth wireless communication technology………………………..2

2. About EARAIR………………………………………...…………….....2



Before use……………………………………………………………..3

1. Overview…………………………………………………………….…3

2. Charging the headset…………………………………………………...3



Using the headset………………………………………………….…5

1. Switching on/off the headset……………………………………….......5

2. Pairing the headset with Bluetooth devices………………………..…..5

How to enter pairing mode………………………………………….....5

Pairing the headset with Bluetooth mobile phone……………………..5

Pairing the headset with Bluetooth transmitter…………………….….6

Multi-pair…………………………………………………………..…..6

3. Wearing the headset………………………………………………..…..7

4. Making calls with the headset………………………………………….8

5. Playing music……………………………………………………….….9

6. Re-connecting to a Bluetooth device…………………….…………….9

7. Restoring to factory defaults and resetting…………………………….10

8. LED indicator………………………………………………………….10

9. Indication tone………………………………………………………...11



Care and maintenance……………………………………………..11



FAQs………………………………………………………………….11



Specifications……………………………………………………......12

2

Welcome to use this Bluetooth stereo headset, EARAIR. Please read this

user’s manual carefully before use.



Brief introduction

1. Bluetooth wireless communication technology

Bluetooth is a standard of close range radio-communication technology that

was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth

technology, we can achieve the highest transmission rate among cell phones,

computers, printers, PDAs and other devices. The max transmission range of

class II is 10 meters while the max radio-communication ranges of class I

can reach up to 100 meters.

2. About EARAIR

EARAIR is a Bluetooth stereo headset. It supports the following Bluetooth

profiles:

HSP —— Headset Profile

HFP —— Hands-free Profile

A2DP—— Advanced Audio Distribution Profile

AVRCP——Audio/Video Remote Control Profile

You can enjoy music wirelessly by using the EARAIR. Features as

following:

1) Pairing with the Bluetooth mobile phone and PDA which support HFP.

 Answer, end and reject call from the headset

 Redial last number

 Voice dial

 Adjust the volume

 Switch the conversation between the headset and the mobile phone

 Microphone mute

2) Pairing with Bluetooth music devices and Bluetooth transmitter which

support A2DP.

 Enjoy music wirelessly

 Adjust the volume

 Remote control pause/ play

 Remote control last/next song

3) Easy to switch between conversation and music, you will not miss the

3

incoming call during listening to music.

4) Every time the headset is switched on, it will automatically connect to the

last paired device.

Note: Even though the paired device and headset support the same

Bluetooth profiles, the functions may be different due to the specification

difference of the paired devices.

 Before use

1. Overview

1) Switch one

: Next song

: Pause/microphone mute

: Last song

2) Switch two

: Volume down

: Multi-function button (switch on/off, answer/end/reject a call, voice

dial/ voice transfer/redial)

: Volume up

3) LED indicator

4) Charging port

(covered by rubber cover)

5) Built-in microphone

6) Loudspeaker

2. Charging the headset

First time charging

4

Before you use this Bluetooth headset, please charge the battery of EARAIR

fully.

Next time

When you hear three “DONG” tones every 20 seconds, at the same time, the

red LED blinks twice. It means the battery is low power and need to be

charged.

The charging steps are as follows:

1) Pull up the rubber cover of charging port

;

2) Plug the travel charger into standard AC power socket (or plug USB

cable into USB port of PC);

3) Plug the other end of charger (or charging cable) into charging port of the

headset.;

When the red LED is on, the headset is charging.

When the red LED is off, the headset is charged fully.

4) It will take about 2.5 hours to charge the headset fully.

5) Take out the charger from power socket and headset, and cover the

rubber cover.

Note: Choosing travel charger or USB cable depends on different countries

or areas and actual demands.

Warning:

1) The battery is recyclable.

2) Do not dispose of the battery in fire, as it may cause explosion.

5

 Using the headset

1. Switching on/off the headset

Function Operation LED

indicator

Indication

tone

Switch on

the headset

Press button

for 3-5 seconds,

and release it till

the blue LED is on

Blue LED is on

for 1 second

A long “DI”

tone

Switch off

the headset

Press button

for 3-5 seconds,

and release it till

the red LED is on

Red LED is on

for 1 second

A long “DI”

tone

Note: In order to save power, the headset will automatically switch off if no

devices can be connected within 5 minutes after switching on.

2. Pairing the headset with Bluetooth devices

How to enter pairing mode

Function Operation LED

indicator

Indication

tone

Enter

into

pairing

mode

Make sure the headset is off

firstly. Press

button for

7-9 seconds, and release it till

the red and blue LEDs blink

alternately

Red and

blue LEDs

blink

alternately.

Two “Du”

tones

Note: The pairing mode will last 2 minutes, if the headset still can’t pair

with any Bluetooth devices after 2 minutes, it will switch into standby mode

automatically.

Pairing the headset with Bluetooth mobile phone

Prior to using the headset for the first time, you have to pair it with a

Bluetooth-enabled cell phone. The pairing procedures are subject to

different models of cell phones. Please refer to your cell phone user’s

manual for further information. The general pairing procedures are as

follows:

1) Please keep the headset and mobile phone within 1 meter when pairing;

2) Make the headset enter into pairing mode.(Please refer to “how to enter

pairing mode”);

3) Activate your mobile phone’s Bluetooth function and set your mobile

phone to search for Bluetooth devices within range, and select

6

“EARAIR” from the list of devices shown;

4) According to the indication, enter password or PIN No: “0000”;

5) If prompted by your mobile phone to connect, select “Yes” (this will vary

among mobile phone models);

6) After successful connecting, blue LED of the headset quickly blinks

twice or three times every 4 seconds.

Notes:

 If the pairing is not successful, please switch off headset firstly, and then

re-pair according to the steps 1-6 mentioned above.

 After pairing is successful, the headset and the mobile phone will

remember each other, they will no need to re-pair next time.

 The headset can remember 8 paired devices, when the number of paired

devices exceeds 8, the first one will be replaced.

 If you want to pair the headset with other devices, please pair it with the

new device according to steps 1～6 mentioned above.

Pairing the headset with Bluetooth transmitter

You can connect the headset to a Bluetooth transmitter to enjoy music

wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not

included) for example. The pairing steps are as follows:

1) Keep the Bluetooth transmitter and the headset within 1 meter when

pairing;

2) Make the headset enter pairing mode (refer to “How to enter pairing

mode);

3) Switch on the Bluetooth transmitter, it will search Bluetooth device

automatically and start pairing;

4) When the headset requests PIN No, the Bluetooth transmitter will

respond “0000” automatically;

5) After successful pairing and connecting, blue LED of the headset blinks

twice every 4 seconds.

Notes:

 The pairing password of the headset is “0000”. So, the headset can only

pair with a Bluetooth transmitter whose pairing password is “0000”.

 If pairing still fails after several tries, please refer to the Bluetooth

transmitter’s user’s manual for further information.

Multi-pair

7

The headset can connect with two devices at most. One is a Bluetooth

mobile phone supporting HFP profile, the other one is a Bluetooth music

device supporting A2DP profile. If you want to finish the multi-pairing,

please refer to the following steps:

1) Firstly, pair the headset with a Bluetooth transmitter (refer to “pairing the

headset with a Bluetooth transmitter);

2) Switch off the Bluetooth transmitter;

3) Pair and connect the headset with a Bluetooth mobile phone (refer to

“pairing the headset with a Bluetooth mobile phone”).

4) Switch on the Bluetooth transmitter, it will connect to the headset

automatically.

Notes:

 After successful pairing, the paired devices will remember each other.

Unless pairing information is deleted because of new pairing, they will

no need to pair next time. If the pairing information is deleted, please

connect the mobile phone with the headset first and then switch on the

Bluetooth transmitter, multi-connecting can be performed.

 For the mobile phone supporting the HSP and A2DP at the same time. It

may set up HSP and A2DP connection with the headset simultaneously.

At this time, the Bluetooth transmitter may not connect to the headset.

3. Wearing the headset

As per the following pictures show, hand the headset on your both ears. You

must use both hands to put on or take off the headset, don’t pull or push the

headset.

8

4. Making calls with the headset

Function

Status of the

headset

Operation

Voice dial Standby mode

Move Switch one to

(Last

song) button for 2S，and release it

until hearing indication tone

Redial last

number

Standby mode Short press

twice

Volume up

Conversation

mode

Move Switch two to

，and then

release(or keep)it

Volume down

Conversation

mode

Move Switch two to

，and then

release(or keep)it.

Answer calling Ringing Short press

Reject calling Ringing

Press and hold

for 2S，and

release it until hearing indication

tone

End calling

Conversation

mode

Short press

Voice transfer

Conversation

mode

Press and hold

for 2S，and

release it until hearing indication

tone

Microphone

mute

Conversation

mode

Short press

twice quickly, the

microphone of the headset will

emits 2 “DU” tones every 10

seconds

Cancel mute

Conversation

mode (mute)

Short press twice quickly

Notes:

 Not all the mobile phones support all the functions listed above. Please

refer to your mobile phone user’s manual.

 When the volume is adjusted to max or min, you will hear a tone.

 When pressing the answer button on some mobile phones, the call will be

transferred to the mobile phone. You can switch the call to the headset by

using the conversation switch button or through operating on the mobile

phone. Please refer to your mobile phone user manual for further

information.

9

5. Playing music

When the headset connects to a mobile phone or Bluetooth transmitter

which supports A2DP, you can enjoy music wirelessly through the headset.

Function

Status of

headset

Operation

Volume up Playing music

Move Switch two to

，and then

release (or keep)it.

Vo l u m e

down

Playing music

Move Switch two to ，and then

release (or keep) it.

Pause Playing music Short press

Play Pausing Short press

Last song Playing music

Move Switch one to

，and then

release it

Next song Playing music

Move Switch one to

，and then

release it

Notes:

 When playing music on some mobile phones, the music will be

transmitted to the mobile phone’s speaker instead of the headset. You

have to select “transmit the sound via Bluetooth” in the settings menu

and then choose “EARAIR” as speaker device. The music will be

transmitted to the headset. Please refer to your mobile phone’s user’s

manual for further information.

 When the volume is adjusted to max or min., you will hear a tone.

 If you want to remote control last/next song, pause/play, it needs your

Bluetooth mobile phone or Bluetooth transmitter paired with the headset

to support AVRCP profile, please refer to the user’s manual of your

mobile phone or Bluetooth transmitter for further information.

6. Re-connecting with a Bluetooth device

1) Automatic connecting

Every time the headset is turned on, it will connect last connected device

automatically.

2) Manual connecting to last connected HFP device

When the headset is in standby mode and doesn’t connect to any HFP

devices, short press

button twice, it will connect to last connected HFP

device automatically.

10

3) Manual connecting to last connected A2DP device

When the headset is in standby mode and doesn’t connect to any A2DP

devices, move Switch One to

(next song) button, it will connect to last

connected A2DP device automatically.

Notes:

 Before connecting to a Bluetooth device, please turn on the Bluetooth

device’s Bluetooth function.

 On some Bluetooth devices, take some Nokia mobile phones for example,

you have to allow automatic connecting in the mobile phone’s settings.

Please refer to your mobile phone’s manual for further information.

7. Restoring to factory defaults and resetting

Make sure the headset is off, press and hold

and buttons

simultaneously for about 8 seconds, release them when you hear two “DU”

tones and see red and blue LEDs are on, now the headset restores to factory

defaults, and the pairing information will be deleted.

Charge the headset to make it reset.

8. LED indicator

1) Charging

LED indicator Status of the headset

Red LED is on Charging

Red LED is off Finish charging

2) Pairing with the Bluetooth devices

LED Indicator Status of the headset

Red and blue LED blink alternately Pairing mode

Blue LED blinks once quickly every

2 seconds

Not connected to a device

Blue LED blinks twice quickly every

4 seconds

Set up HFP or A2DP

connection

Blue LED blinks three times quickly

every 4 second

Set up HFP and A2DP

connection

Blue LED gradually turns on and off Conversation mode

Red LED blinks twice every 20

seconds

Low power

11

9. Indication tone

Indication tone Status of the headset

Two tones every 10 seconds Conversation mode and microphone

mute

Three “DU” tones every 20

seconds

Low power

 Care and maintenance

Read the following recommendations carefully before using EARAIR.

Following these you will be able to enjoy this product for many years.

 Keep it dry and don’t put it in the dump place to avoid the product’s

internal circuit being affected.

 Keep the product away from direct sunlight or hot places. High

temperatures will shorten the life of electronic devices, destroy the

battery or distort certain plastic parts.

 Don’t expose the product to cold areas. It may damage the internal circuit

board.

 Don’t try to disassemble the product as it may get damaged if you are not

professional.

 Don’t let it fall down onto the floor or other hard surfaces. The internal

circuit might get damaged.

 Don’t use intensive chemical products or detergent to clean the product.

 Don’t scratch the surface with sharp things.

In case the product doesn’t function properly, send it to the store you bought

it. The staff will help you to solve the problem

 FAQs

1. What does it mean when red LED is on ?

Battery is low power, need to be recharged.

2. Why is not the red LED on when charging?

a) Please make sure the charging device connect with headset Well;

b) You didn’t use the headset for a long time, the battery may dry up. At this

time, you have to charge the battery for 30 minutes, and then the red

LED will be ON.

12

3. How far is the effective rang between the headset and mobile phone?

According to the Bluetooth standard, the max available range of ClassII

headset is 10 meters. It varies under different environment.

4. Why my mobile phone can not search and find the headset?

The mobile phone will not find the headset if headset and mobile phone are

not under the pairing mode. Make sure the headset is under the pairing mode

and in the effective working range, and then the headset can be paired and

connected.

5. Why can not hear the voice?

a) Make sure the headset has been switched on;

b) Make sure the volume is not too low or muted;

c) Make sure the headset connects with the mobile phone correctly;

d) Make sure the distance between the headset and the cell phone is in the

available Bluetooth range.

6. Why is the voice not clear in conversation?

a) Make sure the mobile phone is in the strong signal area;

b) Make sure the headset is in the available range of this product.

7. Why can’t control the function of pause, revert, control last song and

next song when playing music?

This function needs your Bluetooth device supports AVRCP(Audio/Video

Remote Control profile).

 Specifications

Bluetooth version Bluetooth V2.1+EDR

Bluetooth frequency range 2.402GHz-2.480GHz

Bluetooth profiles HSP, HFP,A2DP and AVRCP

Operating distance 10 meters

Talk time Up to 8 hours

Music playing time Up to 7 hours

Standby time Up to 140 hours

Charging input DC 5.0V/130mA

Charging time Approx 2.5 hours

Dimensions 135×136.5×63.5mm

Weight 35 g

13

Notes:

1. This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

C/Carpinteros, 6. Pol. Ind. Pinares Llanos

Edificio Prolar – 1º-Of. 13-24

28670- Villaviciosa de Odón (Madrid)

ZIPY WARRANTY CONDITIONS.

For information about security, compliance, recycling, information in other

languages or other important information regarding your Zipy, refer to the

manual accompanying the device or go to www.zipylife.com.

The warranty for this Zipy device is granted by Accesorios Inteligentes

Digital S.A. (AID), however if this equipment has been sold by AID to one

of its official distributors, it will be from each one of those in the country

concerned which takes charge of covering this limited warranty, being

included in the text as us.

The warranty of this Zipy device covers operational defects, provided that

such defects are not due to negligence or exclusive fault of the user in

operating the device. Materials and workmanship under conditions of

normal use for two years from the date of first purchase will be covered.

During the first year, if an abnormality occurs in the device and you follow

the instructions for its return, at our discretion insofar as permitted by law,

we will repair the device using new or reconditioned parts, replace the

device with a new or a reconditioned equivalent to the device replaced, or

14

completely or partially reimburse you the purchase price of the device.

During the second year, the user must demonstrate that the failure of the

device comes from a manufacturing defect. This limited warranty applies

insofar as permitted by law to any spare repair or replacement of the device

for the remainder of the original warranty period or for ninety days,

whichever is more extensive. This warranty applies only to hardware

components of the device which have not suffered external damage, such as

those mentioned above. Any accessories or consumables are excluded.

For specific instructions on how to obtain this warranty service, go to:

www.zipylife.com provided that it complies with the following:

The product has been used only in normal use for which it was intended.

It has not been opened, manipulated or altered by anyone outside the official

technical service.

It has not been damaged by impacts, flood, overheating, electrical overload

or any other circumstances showing a possible cause for CANCELLATION

of the warranty as stated in the precautions of the manual of the device.

The product is to be returned to AID, protected with adequate packaging and

with proof of purchase which clearly indicates the brand and type of product,

the date of sale, the name and address of the dealer and the reason for the

failure. For more information on shipping instructions and use of the

warranty, see www.zipylife.com.

Before sending your device to the official technical service, you are

responsible for making a backup copy of the data, software or other material

that can be stored on your device, since it is possible that it will be

reformatted and this information will be lost. AID guarantees the absolute

confidentiality of data, but is not responsible for their loss nor will it be

taken into account in the physical repair of the device.

Any of the following circumstances voids this warranty:

1 Breakage of ports (USB, headphone jack, etc.), screen or glass.

2 Loss of fluid on the screen.

Wear, with obvious signs of improper handling, misuse, abuse, impacts,

falls, dirt, etc.

3 AID does not cover incorrect configuration or installation of

15

software/hardware by the customer, component or peripheral, including

its drivers.

4 The legislation on guarantees establishes some limitations. "The

warranty does not cover additional components such as batteries

, whose

life is limited and conditioned by use and recharging." These components

are guaranteed for 6 months.

5 The waterproof bags have a trial period of 48 hours, as indicated on

the product itself, so the time after that is not covered by any warranty.

6 End users will not need to send us the accessories of the equipment,

especially if they are not originals, as we are not responsible for them.

Limitations:

To the extent permitted by law in each (states in the US), the warranty and

rights set forth above are exclusive and replace all other warranties and

rights, always with respect to the minimum requirements established by the

law of each (states in the US), these being the minimum respected in any

case, excluding warranties for hidden or latent defects. If we cannot legally

exclude the warranties established by law or implied warranties, then insofar

as permitted by law, such warranties are limited in duration to the duration

of this limited warranty and to the repair or replacement service.

Some jurisdictions do not allow limitations on the duration of implied legal

warranties, it is therefore possible that the above limitation does not apply in

your case. We are not responsible for direct, special, or occasional damages,

or those arising from breach of warranty or under any other legal theory. In

some jurisdictions, the above limitation does not apply to claims for

compensation for death or personal injury, or any legal liability for

intentional acts or gross negligence and/or omissions, so the limitation may

not apply in your case.

This limited warranty gives you specific legal rights. To the extent that it is

not possible to waive those rights under applicable law in each country

(states in the US), this limited warranty will not affect your rights.

To contact the technical service nearest you, inquire at: www.zipylife.com

DECLARATION OF CONFORMITY

ACCESORIOS INTELIGENTES DIGITAL S.A.

C/CARPINTEROS,6 , OF-13 VILLAVICIOSA DE ODON. 28670 MADRID

16

We declare under our sole responsibility that the product:

BLUETOOTH HEADPHONE: ZIPY EARAIR which belongs to the brand

Zipy, made in China

1313

Conforms with the requirements of the Directives below by compliance with

the following standards listed:

In accordance with the provisions of the Directive 99/05/EC, European

Parliament and Council on March 9, 1999, transposed into Spanish

legislation by Royal Decree 1890/2000, of November 20, 2000.

Place and date of issue Signed by: Miguel Fauro

June, 22, 2011

EN300 328 V1.7.1(2006-10)

EN301 489-17 V2.1.1 (2009-05)

EN301 489-1 V1.8.1 (2008-04)

EN60950-1:2006+A1:2009+A1:2010

EN50371:2002

Page is loading ...

Zipy GO EarAir User manual

This manual is also suitable for

Zipy GO EarAir User manual

in other languages

Related papers

Other documents