Table of contents
CE mark ..................................................................... 5
Safety hints: ............................................................... 5
Travelling with implement in tow ................................ 6
Coupling and uncoupling the implement
Regulations for Use ................................................... 6
Travelling on roads ..................................................... 6
Before starting work ................................................... 6
Checking before operation ......................................... 6
Overview .................................................................. 10
Tractor .......................................................................11
Ballast weights ..........................................................11
Lifting unit (three-point linkage) ................................11
Hydraulic control on the lifting gear ..........................11
Necessary hydraulic connections ............................ 12
Power connections required .................................... 12
General safety information ....................................... 13
Attaching the machine ............................................. 13
Securing of unbraked devices by means of a tear-off
chain .........................................................................14
Parking the machine ................................................ 15
Safety advice ........................................................... 16
Conversion from working to transport position......... 16
Changing from headland to transport position ..........17
Driving on public roads .............................................17
Frame - chassis ....................................................... 18
Machine dimensions in transport position................ 18
Reducing transport height:
....................................... 18
Transport height 4 m - fold in swath apron
Transport height 3.5m - retract swath apron ............ 19
Transport height 3.5m ............................................ 20
- Remove tines and fold out the safety hoop ........... 20
Operation of the tine holder ..................................... 20
Tine covering ........................................................... 20
General guidelines on working with the machine .... 22
Conversion from transport to working position......... 22
Settings on rotor chassis.......................................... 23
1. Set the lateral incline ............................................ 23
2. Readjusting tine wear .......................................... 23
3. Adjusting rake height ........................................... 23
4. Setting the distance of the outer feeler wheel ...... 24
5. Aligning the indicators
.......................................... 24
Example: left rotor with tandem chassis: ................. 25
Adjust feeler wheels ................................................. 26
Cardan shaft speed ................................................. 27
Mechanical swath apron .......................................... 27
Hydraulic swath apron ............................................. 27
Single rotor operation (optional equipment) ............. 27
Two-swath function (optional equipment) ................ 28
Rotor stabilisation front ............................................ 29
Rotor stabilisation back ............................................ 29
Swivelling from working to field transport position ... 30
Step sequence control ............................................. 30
Adjust the curved track ............................................ 31
Take care when turning on inclines! ......................... 32
Safety advice ........................................................... 33
General maintenance information ............................ 33
Cleaning of machine parts ....................................... 33
Parking in the open .................................................. 33
Winter storage.......................................................... 33
Articulated shafts ..................................................... 34
Hydraulic unit ........................................................... 34
General instructions regarding maintenance work
.................................................... 35
Set tyre tracking ....................................................... 35
Tyres ........................................................................ 35
Tine arms ................................................................. 36
Rotor unit ................................................................. 37
Lubrication chart ...................................................... 38
Spring tines .............................................................. 39
Disposal of old equipment ....................................... 39
Raising the machine ................................................ 39
Lubrication chart ...................................................... 40
Technical data ...........................................................41
Connections required TOP 662 ............................... 42
............................................. 42
Designated use of the swath rotor ........................... 42
Type plate ................................................................ 42
Type plate position ................................................... 42
Hydraulic plan standard ........................................... 43
Hydraulic plan single-rotor operation ....................... 44
Hydraulic plan two-swath function ........................... 45
Lubricants ................................................................ 54
Combination of tractor and mounted implement ...... 57