NuImage Awnings K150708425 User guide

Brand
NuImage Awnings
Model
K150708425
Type
User guide
If you have any
questions or
need assistance,
please call:
1-800-858-5818
ORDERING CAN BE AS EASY AS 1-2-3
1. Determine which series is best for your entryway: Series 1100
with Support Arms or Series 1500 with Sidewings. Measure the
MOUNT ING HEIGHT 1 over your door casing.
• Series 1100 with Support Arms requires a minimum of 3" over the door.
• Series 1500 with Sidewings requires a minimum of 6" over the door.
2. Measure the WIDTH 2 of your doorway and add 3"-5" for
proper appearance.
3. Determine your desired PROJECTION 3 .
IMPORTANT THINGS TO KEEP IN MIND:
• If you have an out swinging door, you should order a minimum projection of 42".
• Watch for nearby lights when measuring and determine if you want the exterior
lighting under the canopy or outside the canopy.
WIDTH
PROJECTION
DROP
MOUNTING
HEIGHT
Frequently Asked Questions:
Q: How long does it take to get my order?
A: Your awning will arrive within 8-12 days.
Q: Is it assembled or unassembled?
A: Unassembled.
Q: Is this a stock product?
A: No, this product is custom made based on the width and color.
Q: What will I need for tools?
A: The awning comes with the fasteners for a wood framed home. You will need the tools shown below.
This depicts Series 1100
with Support Arms.
The same measurement
requirements apply if
ordering Series 1500
with Sidewings.
Mounting Bar Edge Rafters (2) Support Arms Small Screws
Top Trim Canopy Rafter Interlock Clips Large Screws
Front Gutter Slat Sections Deluxe Casting
Actual Size End Views of Door Canopy parts for easy reference and assembly:
mounting bar (a)
top trim (b)
support arms
(2) 36” - 84”
(3) 85” and over
slat sections
(4-10) based on
model ordered
deluxe casting
(1 per arm)
front gutter (c)
edge rafter (2) (d)
canopy rafter (e)
Phillips, Regular & 1/4” Hex Head
Screwdrivers or Bits Channel Lock Pliers Power Drill Level Tape Measure
Parts Check List:
Door Canopy with Support Arms
Required Tools:
slat section seams
Mounting Bar (A) Top Trim (B) Front Gutter (C) Edge Rafter (D) Canopy Rafter (E)
1
2
3
Aluminum Door Canopy
with Support Arms
It is our recommendation that you read instructions carefully
prior to assembly and installation.
QUANTITIES & SIZE OF PARTS MAY VARY BY AWNING SIZE AND MODEL SERIES
www.nuimageawnings.com
2
1
3
  • Page 1 1

NuImage Awnings K150708425 User guide

Brand
NuImage Awnings
Model
K150708425
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents