Werner PS-48 Operating instructions

Type
Operating instructions

Werner PS-48 is a portable scaffold designed to provide a safe and stable elevated work platform. It features a sturdy aluminum frame, non-skid plywood platform, and 4-inch casters for easy mobility. The PS-48 can be used for a variety of tasks, including painting, cleaning, repairs, and maintenance. It is ideal for both indoor and outdoor use, and can be used by professionals and DIYers alike. With its lightweight design and easy assembly, the Werner PS-48 is a versatile and convenient tool for any job that requires working at height.

Werner PS-48 is a portable scaffold designed to provide a safe and stable elevated work platform. It features a sturdy aluminum frame, non-skid plywood platform, and 4-inch casters for easy mobility. The PS-48 can be used for a variety of tasks, including painting, cleaning, repairs, and maintenance. It is ideal for both indoor and outdoor use, and can be used by professionals and DIYers alike. With its lightweight design and easy assembly, the Werner PS-48 is a versatile and convenient tool for any job that requires working at height.

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING WORK.
IF YOU DON'T UNDERSTAND CALL 724-588-8600 FOR ASSISTANCE.
COMPONENT DESCRIPTION SEE ILLUSTRATION
WERNER CO., 93 WERNER ROAD, GREENVILLE, P
A 16125-9499
PHONE (724) 588-8600 • www.wernerladder.com
P/N65611-01 ©2007 Werner Co. May 2007
ANTES DE COMENZAR A TRABAJAR, LEA COMPLETAMENTE ESTAS INSTRUCCIONES.
SI NO LAS ENTIENDE, LLAME AL 724-588-8600 PARA OBTENER ASISTENCIA.
INSTRUCCIONES DE ENSAMBLAJE
PARA EL ANDAMIO PORTATIL.
AADDVVEERRTTEENNCCIIAA::
1.Lea completamente estas instrucciones antes de utilizar el producto. Si no las entiende, llame al 724-588-8600
para obtener asistencia.
2.No seguir todas las instrucciones podría resultar en lesiones graves.
INSTRUCCIONES:
1) Identifique todos los componentes según
el cuadro de arriba. Si algún componente
falta o está dañado, póngase en contacto
con el fabricante.
(1) Estructura del andamio
(2) Plataforma
(4) Rueda de 4 pulgadas
(2) Gancho
(2 ea.) Sujetadores
A
B
C
D
E
2) Despliegue la estructura del andamio (A)
en la posición abierta. Asegúrese de que
el pasador de seguridad esté enganchado
en la posición asegurada y orientado hacia
adentro con respecto a la estructura. Coloque
la estructura sobre el piso, boca abajo,
apoyada sobre las tapas plásticas.
3
)
I
nserte las ruedas (C) en la parte inferior
del extremo de los postes verticales de la
estructura. Es
posible que
necesite un mazo
d
e caucho para
golpear suave-
mente la rueda
e insertarla en
el cojinete.
4) Gire la estructura del andamio y apóyelo
sobre las ruedas. Coloque las plataformas
(B) sobre el extremo de los peldaños de la
estructura a la altura deseada.
DESCRIPCION DE LOS COMPONENTES VEA LA ILUSTRACION
asegurado
desasegurado
C
A
C
W
ERNER CO., 93 WERNER ROAD, GREENVILLE, PA 16125-9499
T
ELEFONO (724) 588-8600 • www.wernerladder.com
P/N65611-01 ©2007 Werner Co. Mayo de 2007
5) Cuando el tablaje no esté en uso, use el
gancho suministrado para colgarla como
se muestra.
Figura 1
Figura 2
Figura 3
A
B
A
B
A
B
C
A
B
C
A
B
C
A
B
D
E
A
B
C
D
E
(1) Scaffold Frame
(2) Platform
(4) 4" Caster
(
2) Hook
(2 ea.) Fasteners
C
A
B
C
A
B
C
A
B
D
E
Figura 4
D
B
E
Figura 5
7)
Antes de utilizar este producto, lea, entienda
y siga todas las instrucciones relacionadas
con este producto.
6) Utilice los sujetadores para sujetar el
gancho a la barra del andamio
ASSEMBLY INSTRUCTIONS FOR
PORTABLE SCAFFOLD.
WWAARRNNIINNGG::
1.Read these instructions completely before using the product. If you don’t understand call 724-588-8600 for assistance.
2
.Failure to comply with all instructions may result in serious injury.
INSTRUCTIONS:
1) Identify all components according to chart
above. If any components are missing or
damaged, contact the manufacturer.
2) Unfold scaffold frame (A) to its open
position. Make sure locking pin is engaged
in the locked position and facing inward
with respect to frame. Set frame on floor,
upside down, resting on plastic caps.
3) Insert casters (C) into bottom of end
frame vertical posts. A rubber mallet may
be required to
gently tap caster
into
the bushing.
4) Turn scaffold frame over onto casters.
Place platforms (B) onto end frame rungs
at desired height.
Locked
Position
UnLoc
ked
P
osition
C
A
C
5) Use hook provided to hang plank as
shown when not in use.
Figure 1
Figure 2
Figure 3
Figure 4
A
B
A
B
D
B
E
Figure 5
7)
Before using this product, read, understand
and follow all instructions affixed to this
product.
6) Use fasteners to attach hanger to
cross bar.
  • Page 1 1

Werner PS-48 Operating instructions

Type
Operating instructions

Werner PS-48 is a portable scaffold designed to provide a safe and stable elevated work platform. It features a sturdy aluminum frame, non-skid plywood platform, and 4-inch casters for easy mobility. The PS-48 can be used for a variety of tasks, including painting, cleaning, repairs, and maintenance. It is ideal for both indoor and outdoor use, and can be used by professionals and DIYers alike. With its lightweight design and easy assembly, the Werner PS-48 is a versatile and convenient tool for any job that requires working at height.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages