Grizzly Indoor Furnishings T23036 User manual

Grizzly
Brand
Grizzly
Model
Indoor Furnishings T23036
Type
User manual

This manual is also suitable for

MODEL T23036
37" FOOT SHEAR
OWNER'S MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Table of Contents
INTRODUCTION ............................................................................................................................... 2





SECTION 1: SAFETY ....................................................................................................................... 5


SECTION 2: SET UP ........................................................................................................................ 8




 
 
 
 
 
SECTION 3: OPERATIONS ........................................................................................................... 14
 
 
 
 
 
 
 
 
SECTION 4: ACCESSORIES ......................................................................................................... 18
SECTION 5: MAINTENANCE......................................................................................................... 20
 
 
 
 
SECTION 6: SERVICE ................................................................................................................... 21
 
 
 
 
SECTION 7: PARTS ....................................................................................................................... 24
 
 
 
WARRANTY AND RETURNS ........................................................................................................ 29


INTRODUCTION

















Contact Info
         



       

        





       


      
      
      



      

Functional OverviewManual Accuracy

       


      

 
 your machine may not exactly match
the manual     



      
      
www.grizzly.com





Figure 1. 
A. 
B. 
C. 
D. 
E. 
F. 
G. 
H. 
Identification


MODEL T23036
37" FOOT SHEAR
8jhidbZgHZgk^XZ/*,%*)+".++(IdDgYZg8Vaa/-%%*'("),,,;Vm/-%%)(-"*.%&
MACHINE DATA
SHEET
Product Dimensions:
LZ^\]i########################################################################################################################################################################### -%.aWh#
AZc\i]$L^Yi]$=Z^\]i#################################################################################################################################### )*
,
¿-m-%m)&
(
¿-
;ddieg^ciAZc\i]$L^Yi]###################################################################################################################################))
(
¿-Am'&
*
¿-L
Shipping Dimensions:
IneZ######################################################################################################################################################################## LddY8gViZ
8dciZci########################################################################################################################################################################## BVX]^cZ
LZ^\]i############################################################################################################################################################################ .'(aWh#
AZc\i]$L^Yi]$=Z^\]i####################################################################################################################################*)Am)%Lm)*=
Capacities:
BVm^bjbL^Yi]#################################################################################################################################################################### (,
BVm^bjbI]^X`cZhh5;jaaL^Yi]#################################################################################################################&-<V#B^aYHiZZa
BVm^bjbI]^X`cZhh5
&
¿'L^Yi]####################################################################################################################&+<V#B^aYHiZZa
;gdciHXVaZGVc\Z############################################################################################################################################################# %"(.
GZVgHXVaZGVc\Z########################################################################################################################################################### %"'.
,
¿-
Construction
H]ZVg7aVYZh########################################################################################################################EgZX^h^dc<gdjcY=VgYZcZYHiZZa
;gVbZ########################################################################################################################################################################### 8Vhi>gdc
IVWaZ###############################################################################################################################################################<gdjcY8Vhi>gdc
=daY"9dlc8aVbe######################################################################################################################################################## 8Vhi>gdc
Other Specifications:
8djcignD[Dg^\^c############################################################################################################################################################## 8]^cV
LVggVcin########################################################################################################################################################################### &NZVg
HZg^VaCjbWZgAdXVi^dc###############################################################################################################>9AVWZadc;gdcid[BVX]^cZ
6hhZbWanI^bZ######################################################################################################################################################### (%b^cjiZh
Features:
;gdciHidehB^Xgd6Y_jhiVWaZGZVgHideh
;gdci:miZch^dc6gbh
Model T23036 Page 1 of 1
Machine Data Sheet


Safety Instructions for Machinery
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words intended to convey the level of importance
of the safety messages. The progression of symbols is described below. Remember that safety
messages by themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
WEARING PROPER APPAREL. 9d cdi lZVg
Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ
ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg
XdkZgadc\]V^g#LZVg cdc"ha^e[ddilZVgidVkd^Y
VXX^YZciVa ha^eh l]^X] XdjaY XVjhZ V adhh d[
ldg`e^ZXZXdcigda#
HEARING PROTECTION. 6alVnh lZVg ]ZVg"
^c\egdiZXi^dcl]ZcdeZgVi^c\dg dWhZgk^^c\adjY
bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ
l^i]dji]ZVg^c\ egdiZXi^dc XVcXVjhZ eZgbVcZci
]ZVg^c\adhh#
MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc
gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z
^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc
Y^higVXiZY#
OWNER’S MANUAL. GZVY VcY jcYZghiVcY
i]^hdlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#
JcigV^cZYjhZghXVcWZhZg^djhan]jgi#
EYE PROTECTION. 6alVnh lZVg 6CH>"
VeegdkZYhV[Zin\aVhhZhdgV[VXZh]^ZaYl]Zc
deZgVi^c\ dg dWhZgk^c\ bVX]^cZgn# id gZYjXZ
i]Z g^h` d[ ZnZ ^c_jgn dg Wa^cYcZhh [gdb [an"
^c\ eVgi^XaZh :kZgnYVn ZnZ\aVhhZh VgZ cdi
VeegdkZYhV[Zin\aVhhZh#
HAZARDOUS DUST. 9jhiXgZViZYl]^aZjh^c\
bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih!
dgadc\"iZgbgZhe^gVidgn YVbV\Z#7ZVlVgZ d[
Yjhi ]VoVgYh VhhdX^ViZY l^i] ZVX] ldg`e^ZXZ
bViZg^Va!VcYValVnhlZVgVC>DH="VeegdkZY
gZhe^gVidgidgZYjXZndjgg^h`#
Safety Instructions for Machinery
SECTION 1: SAFETY


DISCONNECTING POWER SUPPLY. 6alVnh
Y^hXdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ
hZgk^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah
W^ih!WaVYZh!XjiiZgh!ZiX## BV`ZhjgZhl^iX]^h
^cD;;edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVc
jcZmeZXiZYdgjc^ciZci^dcVahiVgi#
INTENDED USE.DcanjhZi]ZbVX]^cZ[dg^ih
^ciZcYZYejgedhZVcYdcanjhZgZXdbbZcYZY
VXXZhhdg^Zh#CZkZghiVcYdcbVX]^cZ!bdY^[n
^i [dg Vc VaiZgcVi^kZ jhZ! dg dji[^i ^i l^i] cdc"
VeegdkZYVXXZhhdg^Zh#
STABLE MACHINE. JcZmeZXiZY bdkZbZci
Yjg^c\deZgVi^dch\gZVian ^cXgZVhZhi]Zg^h` d[
^c_jgnVcYadhhd[Xdcigda#KZg^[nbVX]^cZhVgZ
hiVWaZ$hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ
adX`ZYWZ[dgZhiVgi^c\#
FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#
>il^aaYdi]Z_dWhV[ZgVcYWZiiZgVii]ZgViZ[dg
l]^X]^ilVhYZh^\cZY#
GUARDS & COVERS.<jVgYhVcYXdkZghXVc
egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk"
^c\ eVgih dg[an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ
egdeZgan ^chiVaaZY! jcYVbV\ZY! VcY ldg`^c\
XdggZXianWZ[dgZjh^c\bVX]^cZ#
REMOVING TOOLS. CZkZg aZVkZ VY_jhibZci
iddah! X]jX` `Znh! lgZcX]Zh! ZiX# ^c dg dc
bVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n
gZbdkVaWZ[dgZhiVgi^c\
AWKWARD POSITIONS. @ZZe egdeZg [ddi"
^c\ VcY WVaVcXZ Vi Vaa i^bZh l]Zc deZgVi^c\
bVX]^cZ# 9d cdi dkZggZVX] 6kd^Y Vl`lVgY
]VcYedh^i^dchi]VibV`Zldg`e^ZXZXdcigdaY^["
[^Xjaidg^cXgZVhZi]Zg^h`d[VXX^YZciVa^c_jgn#
DANGEROUS ENVIRONMENTS. 9d cdi jhZ
bVX]^cZgn ^c lZi adXVi^dch! XajiiZgZY VgZVh!
VgdjcY[aVbbVWaZh!dg^ceddgan"a^iVgZVh#@ZZe
ldg`VgZVXaZVc!Ygn!VcYlZaaa^\]iZYid b^c^"
b^oZg^h`d[^c_jgn#
Safety Instructions for Machinery
APPROVED OPERATION. JcigV^cZY deZgVidgh
XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl
igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ
bVX]^cZ# L]Zc bVX]^cZ ^h cdiWZ^c\ jhZY! Y^h"
XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji
bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan
VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[
CHILDREN & BYSTANDERS. @ZZe X]^aYgZc
VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`
VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"
ZghWZXdbZVY^higVXi^dc#
FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY
ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#
;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa
ndjg]VcY^cidi]ZXji#
SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ
XaVbehdg k^hZhid hZXjgZ ldg`e^ZXZ#6 hZXjgZY
ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb
iddeZgViZi]ZbVX]^cZ#
UNATTENDED OPERATION. CZkZg aZVkZ
bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ
OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide
WZ[dgZlVa`^c\VlVn#
MAINTENANCE & INSPECTION.6bVX]^cZi]Vi
^h cdi egdeZgan bV^ciV^cZY bVn deZgViZ jcegZ"
Y^XiVWan#;daadlVaabV^ciZcVcXZ^chigjXi^dch VcY
ajWg^XVi^dc hX]ZYjaZh id `ZZe bVX]^cZ ^c \ddY
ldg`^c\XdcY^i^dc#GZ\jaVgan^cheZXibVX]^cZ[dg
addhZWdaih!Va^\cbZcid[Xg^i^XVaeVgih!W^cY^c\!dg
Vcndi]Zg XdcY^i^dchi]Vi bVnV[[ZXi hV[Z deZgV"
i^dc# 6alVnh gZeV^g dg gZeaVXZ YVbV\ZY dg b^h"
VY_jhiZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#
EXPERIENCING DIFFICULTIES. >[ Vi Vcn i^bZ
ndj VgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z
^ciZcYZY deZgVi^dc! hide jh^c\ i]Z bVX]^cZ
8dciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,%*)+".++(#


Additional Safety for Foot Shears
EXTENSION ARMS.     

       

COMFORTABLE CUTTING OPERATIONS. 



EXPERIENCING DIFFICULTIES.    
     


BLADE ADJUSTMENTS AND
MAINTENANCE. 

GUARDS.

FOOTING.       



HANDS AND FINGERS.

OPERATOR POSITION.
        

CAPACIT Y.    

PROPER USE.       
       

No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.


Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 2: SET UP
      
        

Description Qty





Items Needed for
Setup

       
       
please immediately call Customer Service at
(570) 546-9663for advice.

       
Otherwise, filing a freight claim can be difficult.

       

Unpacking
The Model T23036 is
an extremely heavy
machine. Serious per-
sonal injury may occur if
safe moving methods are
not followed. To be safe,
you will need assistance
and power equipment
when moving the ship-
ping crate and remov-
ing the machine from the
crate.


Inventory



Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure 2) Qty
A. 
B. 
C. 
D. 
E. 
F. 

G. 
H. 
I. 
Figure 2. 
       
 


SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.


Figure 4.


Floor Load
Machine Data Sheet
     
     
      

Placement Location
     

       

Figure 4

Site Considerations
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
       

       
Figure 3
      
For optimum performance, clean all moving
parts or sliding contact surfaces.  
      
      


Clean Up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent Cleaner & Degreaser
H9692—Orange Power Degreaser

Figure 3. 



Moving & Placement

         
       
        
   
Figure 5.

      
      
 


       
 Figure 6     


 

Mounting to Shop
Floor
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure6

Figure 5. Lifting the foot shear.


Assembly


     


To assemble the foot shear:
1. 
   
Figure 7
5.        

6.  
Figure
9
2.         


3. 

4. 

Figure 8
Figure 7. Hinge pin & foot pedal.



Figure 8. 



Figure 10. Foot pedal and front extension arms.
Figure 9. 



7.        

8. 
        

9.        
         

10.        
      
 







To install the rear extension arms (optional):
1.        


2. Figure 11
Figure 11. 

3.        
      
Figure12
Figure 12. 





Operation Safety
Basic Controls
SECTION 3: OPERATIONS
CRUSHING AND SEVERING
HAZARD!
Keep hands and fingers out
of hold-down and blade path
when shearing or serious
injury will occur!
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY
RECOMMEND that you read books, trade
magazines, or get formal training before
beginning any projects. Regardless of the
content in this section, Grizzly Industrial
will not be held liable for accidents caused
by lack of training.
 Figures 1314    


Foot Pedal:     

Front and Rear Extension Arms:
      

Front and Rear Stops:   

Figure 13. Basic controls.




Figure 14. Basic controls (continued).




Bodily injury could result from using this
machine. Always wear safety goggles,
leather work boots, and heavy duty leather
work gloves when operating this machine or
whenever handling metal.


Stops & Guides
Operation Overview
       

     
Figure 15        



Shearing Tips
 
       
  
    

 

 
     

  
   
 
   
   














   









Figure 16. 
Figure 15.

To use the foot shear:
1. 
2. 
Step 1

       
      
     

3.        

      
     
     
 

Finger Guard

     
        
NOT
       







Hold-Down
Adjustment
       
       
       
 







Items Needed Qty.



To adjust the hold-down:
1. 
Figure 17
Figure 17. 



2.       
        

3. Step 2
4. 

Tip: To avoid scratching the surface of your
workpiece, apply thin rubber pads to the bottom
of the hold-down fingers.

        
       
          
       

       
       

Tools Required Qty.



To perform the blade adjustment:
1. 

Figure18
Blade Adjustment
Figure 18. 


2.        
 

3.       


NOTICE: The moving blade should never
overlap the fixed blade. This will cause dam-
age to both.


7. Step 6

8. 

Figure 19. 

4.      



       
      
Adjusting Blade Bow 
5. 



6. 
       
      
       
Figure19
Note: 0.002" is a good starting point for
most operations. The gap width will change,
however, depending on the type and gauge
of the material being sheared. This is a trial-
and-error process. Test with scrap pieces
until you achieve satisfactory results.


SECTION 4: ACCESSORIES

Figure 20. 
G5618—Deburring Tool with two Blades
G5619—Extra Aluminum Blades
G5620—Extra Brass and Cast Iron Blade
      
       
        

H5614—Wire Gauge US Standard
        


Figure 22. 
H5958—Sheet Metal Pliers
       



Figure 23. 
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Grizzly Indoor Furnishings T23036 User manual

Grizzly
Brand
Grizzly
Model
Indoor Furnishings T23036
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents