Grizzly G0709 User manual

Brand: Grizzly

Model: G0709

Category: Mobile phones

Type: User manual

8DENG><=IB6N!'%&%7N<G>OOAN>C9JHIG>6A!>C8#G:K>H:9B6N!'%&&7A

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

;DGBD9:AHB6CJ;68IJG:9H>C8:*$&&8G&'+)+EG>CI:9>C8=>C6

MODEL G0709

14" x 40" GUNSMITHING LATHE

OWNER'S MANUAL

This manual provides critical safety instructions on the proper setup,

operation, maintenance, and service of this machine/tool. Save this

document, refer to it often, and use it to instruct other operators.

Failure to read, understand and follow the instructions in this manual

may result in fire or serious personal injury—including amputation,

electrocution, or death.

The owner of this machine/tool is solely responsible for its safe use.

This responsibility includes but is not limited to proper installation in

a safe environment, personnel training and usage authorization,

proper inspection and maintenance, manual availability and compre-

hension, application of safety devices, cutting/sanding/grinding tool

integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage

from negligence, improper training, machine modifications or misuse.

3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND

OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE

OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE

HARM3OMEEXAMPLESOFTHESECHEMICALSARE

s ,EADFROMLEADBASEDPAINTS

s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS

s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER

9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU

DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS

7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP

MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER

OUTMICROSCOPICPARTICLES

Table of Contents

INTRODUCTION ............................................... 2

BVcjVa6XXjgVXn########################################### '

8dciVXi>c[d####################################################'

BVX]^cZ9ZhXg^ei^dc###################################### '

>YZci^[^XVi^dc################################################### (

BVX]^cZ9ViVH]ZZi###################################### )

SECTION 1: SAFETY ....................................... 7

6YY^i^dcVaHV[Zin[dgBZiVaAVi]Zh################# .

SECTION 2: POWER SUPPLY ...................... 10

SECTION 3: SETUP ....................................... 12

>iZbhCZZYZY[dgHZije############################### &'

JceVX`^c\#################################################### &'

>ckZcidgn######################################################&(

=VgYlVgZGZXd\c^i^dc8]Vgi####################### &)

H^iZ8dch^YZgVi^dch###################################### &*

8aZVcje######################################################## &+

A^[i^c\Bdk^c\########################################### &,

Bdjci^c\###################################################### &-

8]ZX`<ZVgWdmD^a###################################### &-

6YY^c\8jii^c\;aj^Y#################################### &.

EdlZg8dccZXi^dc######################################## &.

IZhiGjc###################################################### &.

He^cYaZ7gZV`">c########################################## ''

GZXdbbZcYZY6Y_jhibZcih######################## ''

SECTION 4: OPERATION .............................. 23

DeZgVi^dcDkZgk^Zl##################################### '(

8dcigdah######################################################## ')

8]jX`;VXZeaViZGZbdkVa$>chiVaaVi^dc##### ',

I]gZZ"?Vl8]jX`######################################### (%

;djg"?Vl8]jX`########################################### (&

;VXZeaViZ##################################################### ('

8ZciZgh########################################################((

IV^ahidX`####################################################### (*

D[[hZii^c\IV^ahidX`###################################### (*

6a^\c^c\IV^ahidX`######################################### (+

9g^aa^c\l^i]IV^ahidX`################################### (,

8jii^c\;aj^YHnhiZb#################################### (.

HiZVYnGZhi;daadlGZhi########################## (.

IddaEdhi######################################################)%

He^YZg########################################################### )&

He^cYaZHeZZY############################################## )&

BVcjVa;ZZY################################################ )(

EdlZg;ZZY################################################## )(

;ZZYHZii^c\h############################################### ))

I]gZVYHZii^c\h############################################ )*

SECTION 5: ACCESSORIES ......................... 49

SECTION 6: MAINTENANCE ......................... 53

HX]ZYjaZ###################################################### *(

8aZVc^c\#######################################################*(

JceV^ciZY8Vhi>gdc##################################### *(

7VaaD^aZgAjWg^XVi^dc#################################### *)

D^aGZhZgkd^gh############################################## *+

K"7ZaiIZch^dc############################################# *,

8jii^c\;aj^YHnhiZb#################################### *-

SECTION 7: SERVICE ................................... 59

IgdjWaZh]ddi^c\########################################### *.

<^W6Y_jhibZcih########################################### +&

7VX`aVh]6Y_jhibZci################################### +(

=Va[Cji6Y_jhibZci##################################### +)

AZVYhXgZl:cYeaVn6Y_jhibZci################## +)

H]ZVgE^cGZeaVXZbZci############################### +*

;ZZY8ajiX]6Y_jhibZci############################## ++

IV^ahidX`AdX`############################################## +,

7ZVg^c\EgZadVY########################################### +,

K"7ZaiGZeaVXZbZci##################################### ,%

<Ve>chZgiGZbdkVa>chiVaaVi^dc############### ,%

7gV`ZH]dZh################################################ ,'

BVX]^cZHidgV\Z########################################## ,(

SECTION 8: WIRING ...................................... 74

L^g^c\HV[Zin>chigjXi^dch############################ ,)

L^g^c\DkZgk^Zl########################################### ,*

:aZXig^XVa7dmL^g^c\#################################### ,+

Hl^iX]ZhVcYEjbeBdidg########################### ,,

He^cYaZBdidg&&%K''%K8dccZXi^dc##### ,-

:aZXig^XVa7dmE]did##################################### ,.

SECTION 9: PARTS ....................................... 80

=ZVYhidX`8VhZVcYH]^[i########################### -%

=ZVYhidX`9g^kZ########################################### -'

=ZVYhidX`He^cYaZ####################################### -)

8]Vc\Z<ZVgh############################################## -+

Fj^X`8]Vc\Z<ZVgWdm9g^kZ##################### -,

Fj^X`8]Vc\Z<ZVgWdmH]^[i####################### -.

6egdc########################################################## .&

8gdhhHa^YZ################################################# .(

8dbedjcYHa^YZ######################################### .*

GZhih########################################################### .+

IV^ahidX`###################################################### .,

Ejbe###########################################################..

BdidgVcY;ZZYGdY################################# &%%

8VW^cZiVcY7gV`Z#################################### &%'

BV^c:aZXig^XVa7gZV`Ydlc######################## &%)

6XXZhhdg^Zh############################################### &%*

AVWZah7gZV`Ydlc##################################### &%+

WARRANTY AND RETURNS ...................... 109

"'"

BdYZa<%,%.B[\#H^cXZ*$&&

INTRODUCTION

I]ZejgedhZd[VbZiVaaVi]Z^hid[VXZ!ijgc!`cjga!

i]gZVY!WdgZ!dgXjiiVeZgh^cVbZiValdg`e^ZXZ

l^i]eZg[ZXiVXXjgVXn#

9jg^c\ine^XVadeZgVi^dch!i]ZaVi]Zhe^cYaZgdiViZh

i]Zldg`e^ZXZVikVg^djhheZZYhV\V^chiV[^mZY

Xjii^c\iddai]Vi^hedh^i^dcZYViVeVgi^XjaVgVc\aZ

[dgi]ZYZh^gZYineZd[Xji#

I]ZXjii^c\idda^hbdjciZYdcViddaedhi!l]^X]

^h edh^i^dcZY Wn i]gZZ Y^[[ZgZci ha^YZh i]Vi ZVX]

bdkZ^cY^[[ZgZciY^gZXi^dch#

Deedh^iZd[i]Z]ZVYhidX`VcYhe^cYaZ^hVhje"

edgi YZk^XZ XVaaZY V iV^ahidX`# I]Z iV^ahidX` XVc

WZha^YVadc\i]ZaVi]ZWZYVcYadX`ZY^ceaVXZid

[^gbanhjeedgii]ZZcYd[Vldg`e^ZXZ#

Machine Description

LZ hiVcY WZ]^cY djg bVX]^cZh# >[ ndj ]VkZ

VcnfjZhi^dch dgcZZY ]Zae!jhZ i]Z^c[dgbVi^dc

WZadlidXdciVXijh#7Z[dgZXdciVXi^c\!eaZVhZ\Zi

i]ZhZg^Va cjbWZgVcY bVcj[VXijgZYViZ d[ndjg

bVX]^cZ#I]^hl^aa]Zaejh]Zaendj[VhiZg#

<g^ooanIZX]c^XVaHjeedgi

&'%(AnXdb^c\BVaa8^gXaZ

BjcXn!E6&,,*+

E]dcZ/*,%*)+".++(

:bV^a/iZX]hjeedgi5\g^ooan#Xdb

LZlVcindjg[ZZYWVX`dci]^hbVcjVa#L]ViY^Y

ndj a^`Z VWdji ^i4 L]ZgZ XdjaY ^i WZ ^begdkZY4

EaZVhZiV`ZV[Zlb^cjiZhid\^kZjh[ZZYWVX`#

<g^ooan9dXjbZciVi^dcBVcV\Zg

E#D#7dm'%+.

7Zaa^c\]Vb!L6.-'',"'%+.

:bV^a/bVcjVah5\g^ooan#Xdb

Contact Info

LZVgZegdjYidd[[Zgi]^hbVcjVal^i]ndjgcZl

bVX]^cZ LZkZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi

l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h!

VcY e]did\gVe]hd[ i]Z bVX]^cZ lZ jhZY l]Zc

lg^i^c\i]^hbVcjVa#=dlZkZg!hdbZi^bZhlZhi^aa

bV`ZVcdXXVh^dcVab^hiV`Z#

6ahd!dl^c\iddjgeda^Xnd[Xdci^cjdjh^begdkZ"

bZci!your machine may not exactly match the

manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["

[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh

ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi

bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#

7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg

bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z

bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh

YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY

bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#

;dgndjgXdckZc^ZcXZ!lZedhiVaaVkV^aVWaZbVc"

jVahVcYbVcjVajeYViZh[dg[gZZdcdjglZWh^iZ

Viwww.grizzly.com#6cnjeYViZhidndjgbdYZa

d[ bVX]^cZl^aa WZ gZ[aZXiZY ^c i]ZhZ YdXjbZcih

VhhddcVhi]Z

VgZXdb

aZiZ#

BVcj[VXijgZ9ViZ

d[NdjgBVX]^cZ

Manual Accuracy

BdYZa<%,%.B[\#H^cXZ*$&&

"("

Identification

Figure 1.AVi]Z[ZVijgZh#

;ZZY

9^gZXi^dc

AZkZg

He^cYaZ

HeZZYAZkZgh

8dcigdaEVcZa

("?Vl8]jX`

HiZVYnGZhi

A^\]i

;daadlGZhi

8jii^c\;aj^YCdooaZ

Fj^X`8]Vc\Z

IddaEdhi

8dbedjcYHa^YZ

IV^ahidX`

A^[i^c\=daZ

l$8dkZg

I]gZVY9^Va

He^cYaZDC$D;;

AZkZg

=Va["CjiAZkZg

;ZZY

HZaZXi^dc

AZkZg

8gdhhHa^YZ

8Vgg^V\Z

;ZZY

HeZZY9^Vah

A^[i^c\=daZ

l$8dkZg

;jaan:cXadhZY

8jii^c\;aj^Y

EjbeVcYIVc`

7gV`Z

EZYVa

")"

BdYZa<%,%.B[\#H^cXZ*$&&

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0709 14 X 40 GUNSMITH'S GEARHEAD LATHE

EgdYjXi9^bZch^dch/

Weight............................................................................................................................................................ 1300 lbs.

Length/Width/Height...............................................................................................................71-1/2 x 26-3/16 x 52 in.

Foot Print (Length/Width)................................................................................................................. 70-3/8 x 15-3/4 in.

H]^ee^c\9^bZch^dch/

Type........................................................................................................................................................... Wood Crate

Content............................................................................................................................................................ Machine

Weight............................................................................................................................................................ 1550 lbs.

Length/Width/Height....................................................................................................................... 76 x 30 x 60-1/4 in.

:aZXig^XVa/

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Minimum Circuit Size........................................................................................................................................ 15 Amp

Cord Length............................................................................................................................................................ 4 ft.

Cord Gauge..................................................................................................................................................... 14 AWG

Plug Included............................................................................................................................................................No

Recommended Plug/Outlet Type............................................................................................................... NEMA 6-15

Bdidgh/

He^cYaZ

Type.................................................................................................................. TEFC Capacitor Start Induction

Horsepower.................................................................................................................................................2 HP

Voltage........................................................................................................................................................220V

Phase.............................................................................................................................................Single-Phase

Amps.....................................................................................................................................................10 Amps

Speed.................................................................................................................................................1725 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ............................................................................................................................... V-Belt Drive

Bearings........................................................................................................... Shielded & Permanently Sealed

BV^cHeZX^[^XVi^dch/

DeZgVi^dc>c[d

Swing Over Bed......................................................................................................................................... 14 in.

Dist Between Centers.................................................................................................................................40 in.

Swing Over Cross Slide..................................................................................................................... 8-13/16 in.

Swing Over Saddle.......................................................................................................................... 13-13/16 in.

Swing Over Gap...................................................................................................................................19-3/4 in.

Max Tool Bit Size...................................................................................................................................... 5/8 in.

Compound Travel.................................................................................................................................3-9/16 in.

Carriage Travel...........................................................................................................................................36 in.

Cross Slide Travel..............................................................................................................................6-11/16 in.

Machine Data Sheet

BdYZa<%,%.B[\#H^cXZ*$&&

"*"

=ZVYhidX`>c[d

Spindle Bore.........................................................................................................................................1-9/16 in.

Spindle Taper.............................................................................................................................................MT#5

No Of Spindle Speeds.......................................................................................................................................8

Spindle Speeds............................................................................................................................ 70–2000 RPM

Spindle Type................................................................................................................................ D1-5 Camlock

Spindle Bearings........................................................................................ NSK High-Precision Tapered Roller

Spindle Length........................................................................................................................................... 17 in.

Spindle Length with 3-Jaw Chuck........................................................................................................ 21-1/8 in.

Spindle Length with 4-Jaw Chuck...................................................................................................... 21-3/16 in.

IV^ahidX`>c[d

Tailstock Travel.................................................................................................................................. 3-15/16 in.

Tailstock Taper.......................................................................................................................................... MT#3

Tailstock Barrel Diameter...................................................................................................................1-21/32 in.

I]gZVY^c\>c[d

No Of Inch Threads.........................................................................................................................................42

Range Of Inch Threads...................................................................................................................... 4–112 TPI

Range Of Longitudinal Feeds........................................................................................0.00168–0.1175 in./rev.

No Of Longitudinal Feeds............................................................................................................................... 24

No Of Cross Feeds......................................................................................................................................... 32

Range Of Cross Feeds................................................................................................0.00046–0.03231 in./rev.

No Of Metric Threads......................................................................................................................................44

Range Of Metric Threads....................................................................................................................0.1–7 mm

No Of Modular Threads...................................................................................................................................34

Range Of Modular Threads............................................................................................................. 0.1-1.75 MP

No Of Diametrical Threads..............................................................................................................................25

Range Of Diametrical Threads..........................................................................................................16–112 DP

9^bZch^dch

Bed Width...............................................................................................................................................7-3/8 in.

Leadscrew TPI............................................................................................................................................8 TPI

Leadscrew Length...................................................................................................................................... 50 in.

Steady Rest Capacity....................................................................................................................3/8 – 2-3/4 in.

Follow Rest Capacity.................................................................................................................... 3/8 – 2-3/8 in.

Faceplate Size............................................................................................................................................11 in.

Leadscrew Diameter................................................................................................................................. 7/8 in.

Feed Rod Diameter................................................................................................................................... 3/4 in.

Floor To Center Height...............................................................................................................................45 in.

8dchigjXi^dc

Base Construction................................................................................................................................ Cast Iron

Headstock Construction....................................................................................................................... Cast Iron

Headstock Gears Construction....................................................................................... Flame-Hardened Steel

Bed Construction................................................................................................. Induction-Hardened Cast Iron

Body Construction................................................................................................................................ Cast Iron

Stand Construction............................................................................................................................... Cast Iron

Paint.......................................................................................................................................................... Epoxy

Di]Zg

Gear Box.......................................................................................................................................................Yes

Di]ZgHeZX^[^XVi^dch/

Country Of Origin ................................................................................................................................................China

Warranty ............................................................................................................................................................ 1 Year

Serial Number Location ....................................................................................... Machine ID Label on Front of Lathe

Sound Rating ...................................................................................................................................................... 82 dB

"+"

BdYZa<%,%.B[\#H^cXZ*$&&

;ZVijgZh/

NSK precision tapered roller spindle bearings

Flame hardened headstock gears

Induction-hardened and precision ground cast iron bed

Coolant system

Adjustable halogen work light

Foot brake with motor shut-off switch

Full-length splash guard

Pull-out chip tray

200-Series quick-change tool post

Outboard spindle spider mount with 4 brass-tipped screws

Cast iron cabinet stands

Fully-enclosed quick-change gearbox

Tailstock offset V-slide with wrench locking socket

D1-5 Camlock Spindle

6XXZhhdg^Zh>cXajYZY/

6" 3-Jaw chuck with reversible jaws

8" 4-Jaw chuck with independent jaws

11" Faceplate

MT#3 live center

Standard MT#3 dead center

Carbide-tipped MT#3 dead center

MT#5-MT#3 sleeve

1/2" Drill chuck with MT#3 arbor

Tailstock wrench

Service tools

Toolbox

BdYZa<%,%.B[\#H^cXZ*$&&

","

For Your Own Safety, Read Instruction

Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions.

This manual uses a series of symbols and signal words intended to convey the level of impor-

tance of the safety messages. The progression of symbols is described below. Remember that

safety messages by themselves do not eliminate danger and are not a substitute for proper

accident prevention measures.

WEARING PROPER APPAREL. 9d cdi lZVg

Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ

ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg

XdkZgadc\]V^g#LZVgcdc"ha^e[ddilZVgidVkd^Y

VXX^YZciVaha^ehl]^X]XdjaYXVjhZVadhhd[ldg`"

e^ZXZXdcigda#

HEARING PROTECTION. 6alVnh lZVg ]ZVg"

^c\egdiZXi^dcl]ZcdeZgVi^c\dgdWhZgk^^c\adjY

bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ

l^i]dji]ZVg^c\ egdiZXi^dcXVcXVjhZ eZgbVcZci

]ZVg^c\adhh#

MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc

gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z

^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc

Y^higVXiZY#

OWNER’S MANUAL. GZVY VcY jcYZghiVcY

i]^h dlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#

JcigV^cZYjhZghXVcWZhZg^djhan]jgi#

EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY

hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg

dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ

^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn

ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#

HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\

bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg

adc\"iZgb gZhe^gVidgn YVbV\Z# 7ZVlVgZ d[Yjhi

]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!

VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid

gZYjXZndjgg^h`#

Indicates a potentially hazardous situation which, if not avoided,

MAY result in minor or moderate injury. It may also be used to alert

against unsafe practices.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

This symbol is used to alert the user to useful information about

proper operation of the machine.

NOTICE

SECTION 1: SAFETY

"-"

BdYZa<%,%.B[\#H^cXZ*$&&



DISCONNECTING POWER SUPPLY.6alVnhY^h"

XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg"

k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih!

WaVYZh!XjiiZgh! ZiX##BV`Z hjgZhl^iX] ^h^c D;;

edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVcjcZmeZXi"

ZYdgjc^ciZci^dcVahiVgi#

APPROVED OPERATION. JcigV^cZY deZgVidgh

XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl

igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ

bVX]^cZ# L]ZcbVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"

XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji

bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan

VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[

DANGEROUS ENVIRONMENTS. 9d cdi jhZ

bVX]^cZgn ^c lZi dg gV^cn adXVi^dch! XajiiZgZY

VgZVh! VgdjcY [aVbbVWaZh! dg^c eddgan"a^iVgZVh#

@ZZe ldg` VgZV XaZVc! Ygn! VcY lZaa"a^\]iZY id

b^c^b^oZg^h`d[^c_jgn#

ONLY USE AS INTENDED. Dcan jhZ bVX]^cZ

[dg ^ih ^ciZcYZY ejgedhZ# CZkZg bdY^[n dg VaiZg

bVX]^cZ[dgVejgedhZcdi^ciZcYZYWni]ZbVcj"

[VXijgZgdghZg^djh^c_jgnbVngZhjai

USE RECOMMENDED ACCESSORIES.8dchjai

i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"

dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"

hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#

CHILDREN & BYSTANDERS. @ZZe X]^aYgZc

VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`

VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"

ZghWZXdbZVY^higVXi^dc#

REMOVE ADJUSTING TOOLS. CZkZg aZVkZ

VY_jhibZciiddah!X]jX``Znh!lgZcX]Zh!ZiX#^cdg

dcbVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n

gZbdkVaWZ[dgZhiVgi^c\

SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ

XaVbehdg k^hZhid hZXjgZldg`e^ZXZ#6 hZXjgZY

ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb

iddeZgViZi]ZbVX]^cZ#

FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY

ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#

;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa

ndjg]VcY^cidi]ZXji#

FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#

>il^aa Ydi]Z _dWhV[Zg VcYWZiiZg Vi i]ZgViZ [dg

l]^X]^ilVhYZh^\cZY#

GUARDS & COVERS. <jVgYh VcY XdkZgh XVc

egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk^c\

eVgih dg [an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ egde"

Zgan^chiVaaZY!jcYVbV\ZY!VcYldg`^c\XdggZXian

WZ[dgZjh^c\bVX]^cZ#

NEVER STAND ON MACHINE.HZg^djh^c_jgndg

VXX^YZciVa XdciVXi l^i] Xjii^c\idda bVn dXXjg^[

bVX]^cZ^hi^eeZY#BVX]^cZbVnWZYVbV\ZY#

STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"

^c\deZgVi^dch\gZVian^cXgZVhZhi]Zg^h`d[^c_jgn

VcY adhh d[ Xdcigda# KZg^[n bVX]^cZh VgZ hiVWaZ$

hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ adX`ZY

WZ[dgZhiVgi^c\#

AWKWARD POSITIONS. @ZZe egdeZg [ddi^c\

VcYWVaVcXZViVaai^bZhl]ZcdeZgVi^c\bVX]^cZ#

9dcdidkZggZVX]6kd^YVl`lVgY]VcYedh^i^dch

i]Vi bV`Z ldg`e^ZXZ Xdcigda Y^[[^Xjai dg ^cXgZVhZ

i]Zg^h`d[VXX^YZciVa^c_jgn#

UNATTENDED OPERATION. CZkZg aZVkZ

bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ

OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide

WZ[dgZlVa`^c\VlVn#

MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ

^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe

bVX]^cZ^c\ddYldg`^c\XdcY^i^dc#6c^begdeZgan

bV^ciV^cZYbVX]^cZbVn^cXgZVhZi]Zg^h`d[hZg^"

djh^c_jgn#

CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi

bVX]^cZ [dg YVbV\ZY eVgih! addhZ Wdaih! b^h"

VY_jhiZY dg b^h"Va^\cZY eVgih! W^cY^c\! dg Vcn

di]Zg XdcY^i^dch i]Vi bVn V[[ZXi hV[Z deZgVi^dc#

6alVnhgZeV^gdggZeaVXZYVbV\ZYdgb^h"VY_jhi"

ZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#

EXPERIENCING DIFFICULTIES. >[ Vi Vcn i^bZ

ndj VgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z

^ciZcYZYdeZgVi^dc!hidejh^c\i]ZbVX]^cZ

8dciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi

*,%*)+".++(#

BdYZa<%,%.B[\#H^cXZ*$&&

"."

Additional Safety for Metal Lathes

CLEARING CHIPS. BZiVa X]^eh XVc ZVh^an Xji

WVgZh`^c·ZkZci]gdj\]Ve^ZXZd[Xadi]#6kd^Y

XaZVg^c\X]^ehWn]VcYdgl^i]VgV\#JhZVWgjh]

dgkVXjjbidXaZVgbZiVaX]^eh#

CHUCK KEY SAFETY. 6 X]jX` `Zn aZ[i ^c i]Z

X]jX`XVcWZXdbZVYZVYanegd_ZXi^aZl]Zci]Z

he^cYaZ^hhiVgiZY#6alVnhgZbdkZi]ZX]jX``Zn

V[iZgjh^c\^i#9ZkZadeV]VW^id[cdiiV`^c\ndjg

]VcYd[[d[VX]jX``ZnjcaZhh^i^hVlVn[gdbi]Z

X]jX`#

TOOL SELECTION.8jii^c\l^i]Vc^cXdggZXidg

YjaaiddaW^il^aad[iZcdkZgadVYi]ZW^iVcYXVjhZ

^iidY^\^cidi]Zldg`e^ZXZVcYhcVe#6hVgZhjai!

]digVodg"h]Vge h]VgYh bVn WZZ_ZXiZYi]Vi XVc

gZhjai ^c V Wjgc dg Wa^cY^c\ ^c_jgn# Id ^cXgZVhZ

hV[Zin! YZXgZVhZ idda W^i adVY! VcY egdk^YZ i]Z

WZhi Ãc^h] edhh^WaZ! ValVnh jhZ i]Z XdggZXi idda

VcYdcZi]Vi^hh]Vge#

SPEED RATES.DeZgVi^c\i]ZaVi]ZVii]Zlgdc\

heZZY XVc XVjhZ cZVgWn eVgih id WgZV` dg i]Z

ldg`e^ZXZ id XdbZ addhZ! l]^X] l^aa gZhjai ^c

YVc\Zgdjh egd_ZXi^aZh i]Vi XdjaY XVjhZ hZkZgZ

^beVXi ^c_jgn# AVg\Z ldg`e^ZXZh bjhi WZ ijgcZY

VihadlheZZYh#6alVnhjhZi]ZVeegdeg^ViZ[ZZY

VcYheZZYgViZh#

STOPPING SPINDLE BY HAND. Hidee^c\ i]Z

he^cYaZWnejii^c\ndjg]VcYdci]Zldg`e^ZXZdg

X]jX` XgZViZh Vc ZmigZbZg^h`d[ ZciVc\aZbZci!

^beVXi! Xgjh]^c\! [g^Xi^dc! dg Xjii^c\ ]VoVgYh#

CZkZg ViiZbei id hadl dg hide i]Z aVi]Z he^cYaZ

l^i] ndjg ]VcY# 6aadl i]Z he^cYaZ id XdbZ id V

hidedc^ihdlcdgjhZi]ZWgV`Z^[Zfj^eeZY#

LONG STOCK SAFETY. Adc\ hidX` XVc l]^e

k^daZcian ^[ cdiegdeZgan hjeedgiZY! XVjh^c\ hZg^"

djh ^beVXi ^c_jgn VcY YVbV\Z id i]Z aVi]Z#

GZYjXZ i]^h g^h` Wn hjeedgi^c\ Vcn hidX` i]Vi

ZmiZcYh [gdb i]Z X]jX`$]ZVYhidX` bdgZ i]Vc

i]gZZ i^bZh ^ih dlc Y^VbZiZg# 6alVnh ijgc adc\

hidX`VihadlheZZYh#

SAFE CLEARANCES. Ldg`e^ZXZh i]Vi XgVh]

^ciddi]Zg XdbedcZcihdc i]Z aVi]ZbVni]gdl

YVc\Zgdjhegd_ZXi^aZh^cVaaY^gZXi^dch!aZVY^c\id

^beVXi ^c_jgn VcY YVbV\ZY Zfj^ebZci# 7Z[dgZ

hiVgi^c\ i]Z he^cYaZ! bV`Z hjgZ i]Z ldg`e^ZXZ

]Vh VYZfjViZ XaZVgVcXZ Wn ]VcY"gdiVi^c\ ^i

i]gdj\]^ih Zci^gZgVc\Z d[bdi^dc#6ahd!X]ZX`

i]Z idda VcY idda edhi XaZVgVcXZ! X]jX` XaZVg"

VcXZ!VcYhVYYaZXaZVgVcXZ#

REMOVING/INSTALLING CHUCKS. 8]jX`h

VgZ ]ZVkn VcY d[iZc d^an VcY ha^eeZgn id ]daY#

Adh^c\ndjg\g^edcVX]jX`XVcaZVYidXgjh]ZY

]VcYhdgVbejiViZYÃc\Zgh#IdgZYjXZi]^hg^h`

VcYegdiZXii]ZaVi]ZWZY!XdkZgi]ZWZYl^i]V

h]ZZid[lddYVcYjhZVX]jX`XgVYaZ#;dgaVg\Z

X]jX`h!Vahd\Zii]ZVhh^hiVcXZd[dcZdgbdgZ

eZdeaZ!VcYjhZVcVeegdeg^ViZ]d^hi^c\VeeVgV"

ijhl]Zc^chiVaa^c\dggZbdk^c\#

SECURING WORKPIECE.6i]gdlcldg`e^ZXZ

bVnXVjhZ hZkZgZ^c_jgndg ZkZcYZVi]#L]Zc

hlVee^c\ i]Z X]jX` _Vl edh^i^dch! YdjWaZ"

X]ZX`i]Vi i]Z_Vl [VhiZcZghVgZ i^\]iVcY i]Vi

i]Zide_Vl^h[jaanhZViZYl^i]i]ZadlZg_Vlcd

\VehZm^hi WZilZZci]Zild# L]ZcXaVbe^c\V

ldg`e^ZXZ!bVm^bjb \g^ee^c\[dgXZ ^hViiV^cZY

Vi [jaa _Vl VcY hXgdaa \ZVg Zc\V\ZbZci# >[ _Vl

VcY hXgdaa \ZVg VgZ dcan eVgi^Vaan Zc\V\ZY!

XaVbe^c\[dgXZ^hgZYjXZY#

CRASHES.Idda^c\dgXdbedcZcihi]ViXdciVXi

V he^cc^c\ X]jX` bVn h]ViiZg hZcY^c\ bZiVa

[gV\bZcih ^c Vaa Y^gZXi^dch gZhjai^c\ ^c hZkZgZ

^beVXi^c_jg^ZhVcYbV_dgYVbV\Zidi]ZaVi]Z#

GZYjXZ i]^h g^h` Wn gZaZVh^c\ VjidbVi^X [ZZYh

V[iZgjhZVcYX]ZX`^c\XaZVgVcXZhWZ[dgZhiVgi"

^c\i]ZaVi]Z#

CUTTING FLUID SAFETY. 8dciVb^cViZY Xji"

i^c\Äj^Y^hVidm^XW^d]VoVgYi]ViXVcXVjhZed^"

hdc^c\[gdbh`^cXdciVXi#>cXdggZXianedh^i^dcZY

Xjii^c\Äj^YcdooaZhXVcheaVh]dci]ZdeZgVidg

dgi]ZÄddg!gZhjai^c\^cVcZmedhjgZdgha^ee^c\

]VoVgY# Id YZXgZVhZ ndjg g^h`! X]Vc\Z Xjii^c\

Äj^YgZ\jaVganVcYjhZi]ZhnhiZbXVgZ[jaan#

"&%"

BdYZa<%,%.B[\#H^cXZ*$&&

SECTION 2: POWER SUPPLY

Availability

7Z[dgZ^chiVaa^c\i]ZbVX]^cZ!Xdch^YZgi]ZVkV^a"

VW^a^inVcYegdm^b^ind[i]ZgZfj^gZYedlZghjeean

X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z

gZfj^gZbZcih[dgi]^hbVX]^cZ!VcZlX^gXj^ibjhi

WZ ^chiVaaZY# Id b^c^b^oZ i]Z g^h` d[ ZaZXigdXj"

i^dc![^gZ!dgZfj^ebZciYVbV\Z!^chiVaaVi^dcldg

VcYZaZXig^XVal^g^c\bjhiWZYdcZWnVfjVa^[^ZY

ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZXdYZh

VcYhiVcYVgYh#

Electrocution, fire, or

equipment damage may

occur if machine is not

correctly grounded and

connected to the power

supply.

Full-Load Current Rating

I]Z [jaa"adVY XjggZci gVi^c\ ^h i]Z VbeZgV\Z V

bVX]^cZYgVlhVi&%%d[i]ZgViZYdjiejiedlZg#

Dc bVX]^cZh l^i] bjai^eaZ bdidgh! i]^h ^h i]Z

VbeZgV\ZYgVlcWni]ZaVg\Zhibdidgdghjbd[Vaa

bdidgh VcYZaZXig^XVa YZk^XZhi]Vib^\]ideZgViZ

VidcZi^bZYjg^c\cdgbVadeZgVi^dch#

Full-Load Current Rating at 220V ..... 10 Amps

I]Z[jaa"adVYXjggZci^hcdii]ZbVm^bjbVbdjci

d[Vbehi]Vii]ZbVX]^cZl^aaYgVl#>[i]ZbVX]^cZ

^hdkZgadVYZY!^il^aaYgVlVYY^i^dcVaVbehWZndcY

i]Z[jaa"adVYgVi^c\#

>[i]ZbVX]^cZ^hdkZgadVYZY[dgVhj[[^X^ZciaZc\i]

d[i^bZ!YVbV\Z!dkZg]ZVi^c\!dg[^gZbVngZhjai·

ZheZX^Vaan ^[ XdccZXiZY id Vc jcYZgh^oZY X^gXj^i#

IdgZYjXZi]Z g^h`d[i]ZhZ]VoVgYh!Vkd^Y dkZg"

adVY^c\ i]Z bVX]^cZ Yjg^c\deZgVi^dcVcY bV`Z

hjgZ^i^hXdccZXiZYidVedlZghjeeanX^gXj^ii]Vi

bZZihi]ZgZfj^gZbZcih^ci]Z[daadl^c\hZXi^dc#

Circuit Requirements for 220V

I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V ''%K

edlZghjeeanX^gXj^ii]Vi]VhVkZg^[^ZY\gdjcYVcY

bZZihi]Z[daadl^c\gZfj^gZbZcih/

Nominal Voltage .............................. 220V/240V

Cycle ..........................................................60 Hz

Phase .................................................... 1-Phase

Circuit Rating ...................................... 15 Amps

Plug/Receptacle ............................. NEMA 6-15

Cord .........3-Wire, 14 AWG, 300VAC, “S”-Type

For your own safety and protection of

property, consult a qualified electrician if

you are unsure about wiring practices or

electrical codes in your area.

Note: The circuit requirements listed in this man

ual apply to a dedicated circuit—where only on

machine will be running at a time. If this machin

will be connected to a shared circuit where mul

tiple machines will be running at the same time,

consult a qualified electrician to ensure that th

circuit is properly sized for safe operation.

6 edlZg hjeean X^gXj^i ^cXajYZh Vaa ZaZXig^XVa

Zfj^ebZciWZilZZci]ZWgZV`ZgWdmdg[jhZeVcZa

^ci]ZWj^aY^c\VcYi]ZbVX]^cZ#I]ZedlZghje"

eanX^gXj^ijhZY[dgi]^hbVX]^cZbjhiWZh^oZYid

hV[Zan]VcYaZi]Z[jaa"adVYXjggZciYgVlc[gdbi]Z

bVX]^cZ [dg Vc ZmiZcYZY eZg^dY d[ i^bZ# >[ i]^h

bVX]^cZ ^h XdccZXiZY id V X^gXj^i egdiZXiZY Wn

[jhZh!jhZVi^bZYZaVn[jhZbVg`ZY9#

BdYZa<%,%.B[\#H^cXZ*$&&

"&&"

Extension Cords

LZ Yd cdi gZXdbbZcY jh^c\ Vc ZmiZch^dc XdgY

l^i] i]^h bVX]^cZ# >[ ndjbjhi jhZVc ZmiZch^dc

XdgY!dcanjhZ^i^[VWhdajiZancZXZhhVgnVcYdcan

dcViZbedgVgnWVh^h#

:miZch^dcXdgYhXVjhZkdaiV\ZYgde!l]^X]bVn

YVbV\ZZaZXig^XVaXdbedcZcihVcYh]dgiZcbdidg

a^[Z#KdaiV\ZYgde^cXgZVhZhVhi]ZZmiZch^dcXdgY

h^oZ\Zihadc\ZgVcYi]Z\Vj\Zh^oZ\ZihhbVaaZg

]^\]Zg\Vj\ZcjbWZgh^cY^XViZhbVaaZgh^oZh#

6cnZmiZch^dcXdgYjhZYl^i]i]^hbVX]^cZbjhi

XdciV^c V \gdjcY l^gZ! bViX] i]Z gZfj^gZY eaj\

VcY gZXZeiVXaZ! VcY bZZi i]Z [daadl^c\ gZfj^gZ"

bZcih/

Minimum Gauge Size ...........................14 AWG

Maximum Length (Shorter is Better).......50 ft.

Grounding Instructions

I]^h bVX]^cZ BJHI WZ \gdjcYZY# >c i]Z ZkZci

d[XZgiV^cbVa[jcXi^dchdgWgZV`Ydlch!\gdjcY^c\

gZYjXZhi]Z g^h` d[ZaZXig^Xh]dX` Wnegdk^Y^c\V

Vi]d[aZVhigZh^hiVcXZ[dgZaZXig^XXjggZci#

>begdeZgXdccZXi^dcd[i]ZZfj^ebZci"\gdjcY^c\

l^gZ XVc gZhjai ^c V g^h` d[ ZaZXig^X h]dX`# I]Z

l^gZl^i]\gZZc^chjaVi^dcl^i]dgl^i]djinZaadl

hig^eZh^hi]ZZfj^ebZci"\gdjcY^c\l^gZ#>[gZeV^g

dggZeaVXZbZcid[i]ZedlZgXdgYdgeaj\^hcZX"

ZhhVgn!YdcdiXdccZXii]ZZfj^ebZci"\gdjcY^c\

l^gZidVa^kZXjggZciXVggn^c\iZgb^cVa#



8]ZX`l^i]VfjVa^[^ZYZaZXig^X^VcdghZgk^XZeZg"

hdccZa^[ndjYdcdijcYZghiVcYi]ZhZ\gdjcY^c\

gZfj^gZbZcih!dg^[ndjVgZ^cYdjWiVWdjil]Zi]Zg

i]Z idda ^h egdeZgan \gdjcYZY# >[ ndj ZkZg cdi^XZ

i]ViVXdgYdgeaj\^hYVbV\ZYdgldgc!Y^hXdc"

cZXi^i[gdbedlZg!VcY^bbZY^ViZangZeaVXZ^il^i]

VcZldcZ#

Figure 2.

C:B6

+"&*eaj\VcYgZXZeiVXaZ#

Serious injury could occur if you connect

the machine to power before completing the

setup process. DO NOT connect to power

until instructed later in this manual.

I]ZedlZgXdgYVcYeaj\heZX^[^ZYjcYZg¸8^gXj^i

GZfj^gZbZcih [dg ''%K¹ dc i]Z egZk^djh eV\Z

]VhVcZfj^ebZci"\gdjcY^c\l^gZVcYV\gdjcY"

^c\ egdc\# I]Z eaj\ bjhi dcan WZ ^chZgiZY ^cid

V bViX]^c\ gZXZeiVXaZ djiaZi i]Vi ^h egdeZgan

^chiVaaZY VcY \gdjcYZY ^c VXXdgYVcXZ l^i] Vaa

adXVaXdYZhVcYdgY^cVcXZhhZZ[^\jgZWZadl#

<gdjcY^c\Egdc\

8jggZci8Vggn^c\Egdc\h

6-15 PLUG

GROUNDED

6-15 RECEPTACLE

"&'"

BdYZa<%,%.B[\#H^cXZ*$&&

SECTION 3: SETUP

This machine and its com-

ponents are very heavy.

Use power lifting equip-

ment such as a fork lift

or hoist to move heavy

items.

I]Z [daadl^c\ VgZcZZYZY id XdbeaZiZi]Z hZije

egdXZhh!WjiVgZcdi^cXajYZYl^i]ndjgbVX]^cZ/

Description Qty

 ;dg`a^[idg=d^hiGViZY'%%%aWh############### &

 A^[i^c\HigVehGViZY'%%%aWh################### '

 A^[i^c\=dd`hGViZY'%%%aWh################### '

 BVX]^c^hihAZkZa######################################## &

 9Z\gZVhZg$HdakZci8aZVcZg######### VhcZZYZY

 H]deGV\h[dg8aZVc^c\############## VhcZZYZY

 Hi^[[7gjh][dg8aZVc^c\############################## &

Items Needed for

Setup

Ndjg bVX]^cZ lVh XVgZ[jaan eVX`V\ZY [dg hV[Z

igVchedgiVi^dc#9^hVhhZbWaZi]ZXgViZVcYgZbdkZ

i]ZeVX`V\^c\bViZg^Vah[gdbVgdjcYndjgbVX]^cZ

id^cheZXi^i#>[ndjY^hXdkZgi]ZbVX]^cZ^hYVb"

V\ZY! please immediately call Customer Service

at (570) 546-9663for advice.

HVkZi]ZXdciV^cZghVcYVaaeVX`^c\bViZg^Vah[dg

edhh^WaZ ^cheZXi^dc Wn i]Z XVgg^Zg dg ^ih V\Zci#

Otherwise, filing a freight claim can be difficult.

L]ZcndjVgZXdbeaZiZanhVi^h[^ZYl^i]i]ZXdcY^"

i^dcd[ndjgh]^ebZci!^ckZcidgni]ZXdciZcih#

Unpacking

Wear safety glasses dur-

ing the entire setup pro-

cess!

This machine presents

serious injury hazards

to untrained users. Read

through this entire manu-

al to become familiar with

the controls and opera-

tions before starting the

machine!

BdYZa<%,%.B[\#H^cXZ*$&&

"&("

6[iZg Vaa i]Z eVgih ]VkZ WZZc gZbdkZY [gdb i]Z

WdmZh!i]Z[daadl^c\^iZbhh]djaYWZ^cXajYZYl^i]

ndjgbVX]^cZ/

Mounted Inventory Components Qty

A. I]gZZ"?Vl8]jX`+################################### &

B. HiZVYnGZhi################################################ &

C. ;daadlGZhi################################################# &

D. Fj^X`8]Vc\ZIddaEdhil$=daYZg############# &

Loose Inventory Components Qty

E. ;djg"?Vl8]jX`-##################################### &

F. IddaWdm#######################################################&

G. ;djg"?Vl8]jX`LgZcX]############################ &

H. ;VXZeaViZ&&############################################## &

I. ;VXZeaViZ8VbadX`HZi############################## &

Toolbox Inventory Components Qty

J. 7diiaZ[dgD^a############################################### &

K. He^cYaZHaZZkZBI*$BI(####################### &

L. 9ZVY8ZciZgBI(8VgW^YZI^e################# &

M. 9ZVY8ZciZgBI(=HHI^e###################### &

N. A^kZ8ZciZgBI(####################################### &

O. IV^ahidX`AdX`AZkZg################################### &

P. =VcYaZh###################################################### '

Q. 8]jX`6gWdgBI($?I(############################# &

R. =ZmLgZcX]HZi+!-bb###################&:VX]

S. ILgZcX]################################################# &

T. I]gZZ"?Vl8]jX`@Zn################################ &

U. E]^aa^ehVcYHiVcYVgYHXgZlYg^kZg'######## &

V. DeZc":cYLgZcX]HZi

 .$&&!&%$&'!&'$&)bb#########################&:VX]

W. 9g^aa8]jX`@Zn########################################### &

X. 9g^aa8]jX`

¿'"?I(#################################### &

Y. Idda=daYZgDcZ>chiVaaZY######################## '

Inventory

NOTICE

Some hardware/fasteners on the inventory

list may arrive pre-installed on the machine.

Please check installation locations before

assuming that any items from the inventory

list are missing.

Figure 3.BdjciZY^ckZcidgnXdbedcZcih#

Figure 4.AddhZ^ckZcidgnXdbedcZcih#

;

Figure 5.IddaWdm^ckZcidgn#

"&)"

BdYZa<%,%.B[\#H^cXZ*$&&

Hardware Recognition Chart

BdYZa<%,%.B[\#H^cXZ*$&&

"&*"

Site Considerations

Figure 6.B^c^bjbldg`^c\XaZVgVcXZh#

.+

@ZZe

Ldg`e^ZXZ

AdVY^c\6gZV

JcdWhigjXiZY

AVi]Z

(%

B^c^bjb

Note:Drawing

Not to Scale.

:aZXig^XVa7dm

6XXZhh8dkZg

EdlZg

8dccZXi^dc

')

B^c^bjb

LVaa

Weight Load

GZ[Zgidi]ZMachine Data Sheet[dgi]ZlZ^\]i

d[ndjgbVX]^cZ#BV`ZhjgZi]Vii]Zhjg[VXZjedc

l]^X]i]ZbVX]^cZ^heaVXZYl^aaWZVgi]ZlZ^\]i

d[i]ZbVX]^cZ!VYY^i^dcVaZfj^ebZcii]VibVnWZ

^chiVaaZYdci]ZbVX]^cZ!VcYi]Z]ZVk^Zhildg`"

e^ZXZi]Vil^aaWZjhZY#6YY^i^dcVaan!Xdch^YZgi]Z

lZ^\]id[i]ZdeZgVidgVcYVcnYncVb^XadVY^c\

i]VibVndXXjgl]ZcdeZgVi^c\i]ZbVX]^cZ#

Space Allocation

8dch^YZg i]Z aVg\Zhi h^oZ d[ ldg`e^ZXZ i]Vi l^aa

WZ egdXZhhZY i]gdj\] i]^h bVX]^cZ VcY egdk^YZ

Zcdj\]heVXZ VgdjcYi]ZbVX]^cZ [dg VYZfjViZ

deZgVidg bViZg^Va ]VcYa^c\ dg i]Z ^chiVaaVi^dc d[

Vjm^a^VgnZfj^ebZci#L^i]eZgbVcZci^chiVaaVi^dch!

aZVkZZcdj\]heVXZVgdjcYi]ZbVX]^cZiddeZc

dggZbdkZYddgh$XdkZghVhgZfj^gZYWni]ZbV^c"

iZcVcXZ VcY hZgk^XZ YZhXg^WZY ^c i]^h bVcjVa#

See below for required space allocation.

Physical Environment

I]Z e]nh^XVa Zck^gdcbZci l]ZgZ ndjg bVX]^cZ

^hdeZgViZY^h^bedgiVci[dghV[ZdeZgVi^dcVcY

i]Zadc\Zk^ind[^ihXdbedcZcih#;dgWZhigZhjaih!

deZgViZi]^hbVX]^cZ^cVYgnZck^gdcbZcii]Vi^h

[gZZ [gdb ZmXZhh^kZ bd^hijgZ! ]VoVgYdjh X]Zb^"

XVah! V^gWdgcZ VWgVh^kZh! dg ZmigZbZ XdcY^i^dch#

:migZbZXdcY^i^dch[dgi]^hineZd[bVX]^cZgnVgZ

\ZcZgVaan i]dhZ l]ZgZ i]Z VbW^Zci iZbeZgVijgZ

gVc\Z ZmXZZYh )&¶&%);0 i]Z gZaVi^kZ ]jb^Y^in

gVc\ZZmXZZYh'%¶.*cdc"XdcYZch^c\0dgi]Z

Zck^gdcbZci ^h hjW_ZXi id k^WgVi^dc! h]dX`h! dg

Wjbeh#

Electrical Installation

EaVXZi]^hbVX]^cZcZVgVcZm^hi^c\edlZghdjgXZ#

BV`Z hjgZ Vaa edlZg XdgYh VgZ egdiZXiZY [gdb

igV[[^X! bViZg^Va ]VcYa^c\! bd^hijgZ! X]Zb^XVah!

dgdi]Zg]VoVgYh#BV`ZhjgZidaZVkZVXXZhhid

V bZVch d[ Y^hXdccZXi^c\ i]Z edlZg hdjgXZ dg

Zc\V\^c\VadX`dji$iV\djiYZk^XZ#

Lighting

A^\]i^c\ VgdjcY i]Z bVX]^cZ bjhi WZ VYZfjViZ

Zcdj\]i]VideZgVi^dchXVcWZeZg[dgbZYhV[Zan#

H]VYdlh!\aVgZ!dghigdWZZ[[ZXihi]VibVnY^higVXi

dg^beZYZi]ZdeZgVidgbjhiWZZa^b^cViZY#

Children or untrained people

may be seriously injured by

this machine. Only install in an

access restricted location.

"&+"

BdYZa<%,%.B[\#H^cXZ*$&&

I]Z jceV^ciZY hjg[VXZh d[ ndjg bVX]^cZ VgZ

XdViZY l^i] V ]ZVkn"Yjin gjhi egZkZciVi^kZ i]Vi

egZkZcihXdggdh^dc Yjg^c\h]^ebZciVcYhidgV\Z#

I]^hgjhiegZkZciVi^kZldg`hZmigZbZanlZaa!Wji^i

l^aaiV`ZVa^iiaZi^bZidXaZVc#

7ZeVi^ZciVcYYdVi]dgdj\]_dWXaZVc^c\ndjg

bVX]^cZ#I]Zi^bZndjheZcYYd^c\i]^hcdll^aa

\^kZndjVWZiiZgVeegZX^Vi^dc[dgi]ZegdeZgXVgZ

d[ndjgbVX]^cZhjceV^ciZYhjg[VXZh#

I]ZgZVgZbVcnlVnhidgZbdkZi]^hgjhiegZkZc"

iVi^kZ!Wjii]Z[daadl^c\hiZehldg`lZaa^cVl^YZ

kVg^Zin d[h^ijVi^dch#6alVnh [daadl i]Z bVcj[VX"

ijgZg»h^chigjXi^dchl^i]VcnXaZVc^c\egdYjXindj

jhZVcYbV`ZhjgZndjldg`^cVlZaa"kZci^aViZY

VgZVidb^c^b^oZZmedhjgZididm^X[jbZh#

Before cleaning, gather the following:

 9^hedhVWaZGV\h

 8aZVcZg$YZ\gZVhZgL9)%ldg`hlZaa

 HV[Zin\aVhhZhY^hedhVWaZ\adkZh

 EaVhi^XeV^cihXgVeZgdei^dcVa

Basic steps for removing rust preventative:

1. EjidchV[Zin\aVhhZh#

2. 8dVi i]Z gjhi egZkZciVi^kZ l^i] V a^WZgVa

Vbdjcid[XaZVcZg$YZ\gZVhZg!i]ZcaZi^ihdV`

[dg*¶&%b^cjiZh#

3. L^eZd[[i]Zhjg[VXZh#>[ndjgXaZVcZg$YZ\gZVh"

Zg^hZ[[ZXi^kZ!i]ZgjhiegZkZciVi^kZl^aal^eZ

d[[ZVh^an#>[ndj]VkZVeaVhi^XeV^cihXgVeZg!

hXgVeZd[[VhbjX]VhndjXVc[^ghi!i]Zcl^eZ

d[[i]ZgZhil^i]i]ZgV\#

4. GZeZViSteps 2–3VhcZXZhhVgnjci^aXaZVc!

i]ZcXdViVaajceV^ciZYhjg[VXZhl^i]VfjVa^in

bZiVaegdiZXiVciidegZkZcigjhi#

Gasoline or products

with low flash points can

explode or cause fire if

used to clean machin-

ery. Avoid cleaning with

these products.

Many cleaning solvents

are toxic if concentrat-

ed amounts are inhaled.

Only work in a well-venti-

lated area.

NOTICE

Avoid chlorine-based solvents, such as

acetone or brake parts cleaner, that may

damage painted surfaces. Test all cleaners

in an inconspicuous area before using to

make sure they will not damage paint.

Cleanup

BdYZa<%,%.B[\#H^cXZ*$&&

"&,"

Lifting & Moving

You must use power lifting equipment and

assistance to lift and move this machine.

Inspect all lifting equipment to make sure

it is in working order and rated for the load

before attempting to lift. Ignoring this warn-

ing may lead to serious personal injury or

death.

Additional Cleaning Tips

 ;dg i]dgdj\] XaZVc^c\! gZbdkZ i]Z hiZVYn

gZhi!iddaedhi!XdbedjcYha^YZ!VcYX]Vc\Z"

\ZVgh#

 JhZVhi^[[ Wgjh]l]Zc XaZVc^c\i]Z i]gZVYh

dci]ZaZVYhXgZl#

 BdkZ i]Z ha^YZh VcY iV^ahidX` WVX` VcY

[dgi]idi]dgdj\]anXaZVc$ajWg^XViZjcYZgcZVi]

i]Zb#

 6[iZg XaZVc^c\! l^eZ Ydlc i]Z lVnh l^i] V

]^\]"fjVa^inlVnd^a!hjX]Vhh]dlcWZadl#

H8257—Primrose Armor Plate with Moly-D

Machine and Way Oil 1 Quart

I]^hhjeZg^dgbVX]^cZVcYlVnajWg^XVciegZkZcih

hi^X` ha^e VcY X]ViiZg YjZ id Vci^"[g^Xi^dc XVeV"

W^a^i^Zh gZhjai^c\ ^c \gZViZg egZX^h^dc bVX]^c^c\

XVeVW^a^i^Zh# ;dgbh V i]^c Vgbdg eaViZ d[ d^a i]Vi

Z[[ZXi^kZanajWg^XViZh ha^Y^c\bZiVa hjg[VXZh hjX]

VhlVnhVcY\^Whl]^aZ\jVgY^c\V\V^chiVcYgjhi

VcY Xdggdh^dc# 6Y]Zh^kZ$Xd]Zh^kZ XdbedcZcih

VgZVYYZY[dgkZgi^XVahjg[VXZh#GZh^hihhfjZZoZ

dji!gjcc^c\!Yg^ee^c\VcYcdc"\jbb^c\#

Figure 7.Eg^bgdhZ6gbdgEaViZAjWg^XVci#

¸I]^h^h\ddYhij[[

>jhZ^idcbnaVi]Zh

Vi]dbZ#¹

S. Balolia – President

I]^h aVi]Z ]Vh V ]daZ Wj^ai ^cid ZVX] ZcY d[ i]Z

hiVcY hZZ Figure 8 i]Vi ^h YZh^\cZY id VXXZei

V hijgYn & Y^VbZiZg a^[i^c\ WVg# :VX] WVg bjhi

ZmiZcY[VgZcdj\][gdbi]ZhiVcYhdi]ViX]V^ch

dga^[i^c\higVehXVcWZaddeZYdgXdccZXiZYidVaa

[djgXdgcZghVcYi]ZaVi]ZXVcWZa^[iZY#

Figure 8.A^[i^c\]daZh#

A^[i^c\=daZh

"&-"

BdYZa<%,%.B[\#H^cXZ*$&&

Check Gearbox Oil

>i ^h Xg^i^XVa i]Vi i]ZgZ ^h d^a ^c i]Z ]ZVYhidX`!

fj^X` X]Vc\Z \ZVgWdm! VcY i]Z Vegdc \ZVgWdm

WZ[dgZegdXZZY^c\l^i]i]ZiZhigjc#GZ[Zgidi]Z

Lubrication ^chigjXi^dch dc Page 56 [dg bdgZ

YZiV^ahdcl]^X]ineZVcY]dlbjX]d^aidjhZ^c

ZVX]\ZVgWdm#

GEARBOXES MUST

BE FILLED WITH OIL!

NO OIL SHIPPED WITH

MACHINE!

Refer to the Lubrication

Section in this Manual

for Recommended

Oil Type.

6ai]dj\] cdi gZfj^gZY! lZ gZXdbbZcY i]Vi ndj

bdjci ndjg cZl bVX]^cZ id i]Z [addg# 7ZXVjhZ

i]^h^hVcdei^dcVahiZeVcY[addgbViZg^VahbVn

kVgn! [addg bdjci^c\ ]VgYlVgZ ^h cdi ^cXajYZY#

<ZcZgVaan! ndj XVc Z^i]Zg Wdai ndjg bVX]^cZ id

i]Z [addg dg bdjci ^i dc bVX]^cZ bdjcih# 7di]

dei^dch VgZ YZhXg^WZY WZadl# L]^X]ZkZg dei^dc

ndjX]ddhZ!^i^hcZXZhhVgnidaZkZandjgbVX]^cZ

l^i]VegZX^h^dcaZkZa#

Bolting to Concrete Floors

AV\ h]^ZaY VcX]dgh l^i] aV\ hXgZl VcY VcX]dg

hijYh Figure 9 VgZ ild edejaVg bZi]dYh [dg

VcX]dg^c\VcdW_ZXiidVXdcXgZiZ[addg#LZhj\"

\ZhindjgZhZVgX]i]ZbVcndei^dchVcYbZi]dYh

[dgbdjci^c\ndjgbVX]^cZ VcYX]ddhZ i]ZWZhi

i]Vi[^ihndjgheZX^[^XVeea^XVi^dc#

Mounting

Figure10#BVX]^cZbdjciZmVbeaZ#

Using Machine Mounts

Jh^c\bVX]^cZbdjcih!h]dlc^cFigure 10!\^kZh

i]ZVYkVciV\Zd[[VhiaZkZa^c\VcYk^WgVi^dcgZYjX"

i^dc# I]Z aVg\Z h^oZ d[ i]Z [ddi eVYh Y^hig^WjiZh

i]ZlZ^\]id[i]ZbVX]^cZidgZYjXZhigV^cdci]Z

[addg#

NOTICE

Anchor studs are stronger and more per-

manent alternatives to lag shield anchors;

however, they will stick out of the floor,

which may cause a tripping hazard if you

decide to move your machine.

Figure9#Ine^XVa[VhiZcZgh[dgbdjci^c\id

XdcXgZiZ[addgh#

AV\H]^ZaY6cX]dg

VcYAV\HXgZl

Most electrical codes require that machines

connected to the power source by fixed

conduit MUST be secured to the floor.

NOTICE

We strongly recommend securing your

machine to the floor if it is hardwired to the

power source. Consult with your electrician

to ensure compliance with local codes.

NOTICE

6cX]dgHijY

Page is loading ...

Grizzly G0709 User manual

Brand: Grizzly

Model: G0709

Category: Mobile phones

Type: User manual

Download PDF

report

Grizzly G0709 User manual

Grizzly G0709 User manual

Related papers

Other documents