EuroLite KRX-16 User manual

©

Copyright

Nachdruck verboten!

Reproduction prohibited!

Réproduction interdit!

Prohibida toda reproducción.

Für weiteren Gebrauch aufbewahren!

Keep this manual for future needs!

Gardez ce mode d’emploi pour des

utilisations ultérieures!

Guarde este manual para posteriores usos.

BEDIENUNGSANLEITUNG

USER MANUAL

MODE D'EMPLOI

MANUAL DEL USUARIO

KRX-16

16-channel lighting controller

eurolite

®

CH 16

KILL

AUDIO

SPEED

MASTER

FADE

TIME

CH 15

CH 14

CH 13

CH 12

CH 11

CH 10

CH 9

CH 8

CH 7

CH 6

CH 5

CH 4

CH 3

CH 2

CH 1

1

9

2

10

3

11

4

12

5

13

6

14

7

15

8

16

KRX-16 DMX

1

2

34

56

7

8

4WAY

8WAY

12 WAY

16 WAY

GLIDE

TAP

SYNC

PROGRAMM GO

MANUAL

AUDIO

STEP DARK FULL ON BLACK OUT

ADD 1

ADD 2

ADD 3

FOG MACHINE

READY

PROGRAM

LOCK

MIDI SIGNAL

STAND BY

MANUAL LOCK

LOCK OPTION

FLASH

PATTERNS

CONTROL

PROGRAM

16 CH DIMMER CONSOLE DMX - MIDI

eurolite

®

CH 16

KILL

AUDIO

SPEED

MASTER

FADE

TIME

CH 15

CH 14

CH 13

CH 12

CH 11

CH 10

CH 9

CH 8

CH 7

CH 6

CH 5

CH 4

CH 3

CH 2

CH 1

1

9

2

10

3

11

4

12

5

13

6

14

7

15

8

16

KRX-16 DMX

1

2

3

4

5

6

7

8

4WAY

8WAY

12 WAY

16 WAY

GLIDE

TAP SYNC

PROGRAMM

GO

MANUAL

AUDIO

STEP

DARK

FULL ON

BLACK OUT

ADD 1

ADD 2

ADD 3

FOG MACHINE

READY

PROGRAM LOCK

MIDI SIGNAL

STAND BY

MANUAL LOCK

FLASH

PATTERNS

CONTROL

PROGRAM

16 CH DIMMER CONSOLE DMX - MIDI

LOCK OPTION

1

2

3

4

5

6

7

8

9

11

12

13

14

15

16

17

18

19

21

22

23

10

20

OFF

ON

DC 12V~20V,

500mA min.

-

+

0.1V~1Vp-p

LINE INPUT

THRU

OUT

IN

DMX POLARITY SELECT

1=Ground

2=Data -

3=DATA+

1=Ground

2=Data +

3=DATA-

DMX OUT

2

1

3

Full on

Black out

GND

POWER

DC INPUT

MIDI

AUDIO

REMOTE

REMOTE SMOKE MACHINE

Typ/Type/Type/Tipo:

Spannungsversorgung/Power supply/Alimentation/

Alimentación:

Gesamtanschlusswert/Power consumption/Puissance de

rendement/Consumo:

KRX-16 DMX

12-20 V DC, 500 mA

10 W

®

eurolite

MADE IN CHINA

Lire le mode d'emploi avant l'utilisation. Ne pas exposer à l'humidité. Ne

jamais ouvrier le boîtier! L'intérieur de l'appareil ne contient pas de parties

nécessitant un entretien. L'entretien et les réparations seulement par un

revendeur autorisé!

Lea el manual del usuario antes de la puesta en marcha. Proteja de la hume-

dad! îNunca abrir la caja! No hay piezas que necesiten de servicio dentro del

aparato. Operaciones de mantenimiento y servicio únicamente por distribui-

dores autorizados.

Vor Gebrauch Anleitung lesen. Gerät vor Feuchtigkeit schützen! Niemals das

Gerät öffnen! Im Geräteinnern befinden sich keine zu wartenden Teile.

Wartungs- und Servicearbeiten nur durch autorisierten Fachhandel!

Read user manual before use. Keep away from moisture! Never open the

housing! There are no serviceable parts inside the device. Maintenance and

service operations only by authorized dealers.

31

32

33

24

25

26

27

28

29

30

70064620X74NXS_V_1_0.DOC

4/35

MULTI-LANGUAGE-INSTRUCTIONS

Inhaltsverzeichnis

Table of contents

Sommaire

Contenido

1. EINFÜHRUNG............................................................................................................................................... 7

2. SICHERHEITSHINWEISE............................................................................................................................. 7

3. BESTIMMUNGSGEMÄSSE VERWENDUNG.............................................................................................. 8

4. GERÄTEBESCHREIBUNG .......................................................................................................................... 8

4.1 Features ................................................................................................................................................... 8

4.2 Geräteübersicht........................................................................................................................................ 9

5. SETUP......................................................................................................................................................... 10

5.1 Installation.............................................................................................................................................. 10

5.2 Musiksteuerung...................................................................................................................................... 10

5.3 Anschluss der Dimmerpacks ................................................................................................................. 10

6. BEDIENUNG ............................................................................................................................................... 11

6.1 Manual-Modus ....................................................................................................................................... 11

6.2 Programmiermodus entsperren ............................................................................................................. 11

6.3 Dimmeranzeige umstellen ..................................................................................................................... 11

6.4 Szenen abspeichern .............................................................................................................................. 11

6.5 Szenen aufrufen..................................................................................................................................... 12

6.6 Chaser abspeichern............................................................................................................................... 12

6.7 Chaser aufrufen ..................................................................................................................................... 12

6.8 Chaser abspielen ................................................................................................................................... 12

6.9 Einzelne DMX-Kanäle abschalten ......................................................................................................... 12

6.10 Mehrere Chaser abspielen................................................................................................................... 12

6.11 Go-Funktion ......................................................................................................................................... 12

6.12 Alle Kanäle auf Maximum schalten...................................................................................................... 13

6.13 Blackout-Modus ................................................................................................................................... 13

6.14 Betrieb über Fuß-Taster....................................................................................................................... 13

6.15 Programmiermodus sperren ................................................................................................................ 13

6.16 Zurücksetzen auf Werkseinstellungen................................................................................................. 13

7. PROBLEMBEHEBUNG .............................................................................................................................. 13

8. REINIGUNG UND WARTUNG.................................................................................................................... 13

9. TECHNISCHE DATEN................................................................................................................................ 14

1. INTRODUCTION ......................................................................................................................................... 15

2. SAFETY INSTRUCTIONS .......................................................................................................................... 15

3. OPERATING DETERMINATIONS.............................................................................................................. 16

4. DESCRIPTION ............................................................................................................................................ 16

4.1 Features ................................................................................................................................................. 16

4.2 Overview ................................................................................................................................................ 17

5. SETUP......................................................................................................................................................... 18

5.1 Installation.............................................................................................................................................. 18

5.2 Sound-control......................................................................................................................................... 18

5.3 Connection with the dimmerpacks ......................................................................................................... 18

6. OPERATION ............................................................................................................................................... 19

6.1 Manual-mode ......................................................................................................................................... 19

6.2 Unlock program mode............................................................................................................................ 19

6.3 Switch the dimmer display ..................................................................................................................... 19

6.4 Memorize scenes................................................................................................................................... 19

70064620X74NXS_V_1_0.DOC

5/35

6.5 Call up scenes........................................................................................................................................ 19

6.6 Memorize chasers.................................................................................................................................. 19

6.7 Call up chaser ........................................................................................................................................ 20

6.8 Run a chaser.......................................................................................................................................... 20

6.9 Switch off individual DMX-channels....................................................................................................... 20

6.10 Call up several chasers........................................................................................................................ 20

6.11 Go-function........................................................................................................................................... 20

6.12 Set all channels to maximum............................................................................................................... 20

6.13 Blackout-Mode ..................................................................................................................................... 20

6.14 Footswitch............................................................................................................................................ 20

6.15 Lock program mode ............................................................................................................................. 20

6.16 Returning to the factory setup.............................................................................................................. 21

7. PROBLEM CHART ..................................................................................................................................... 21

8. CLEANING AND MAINTENANCE ............................................................................................................. 21

9. TECHNICAL SPECIFICATIONS................................................................................................................. 21

1. INTRODUCTION ......................................................................................................................................... 22

2. INSTRUCTIONS DE SÉCURITÉ ................................................................................................................ 22

3. EMPLOI SELON LES PRESCRIPTIONS................................................................................................... 23

4. DESCRIPTION ............................................................................................................................................ 23

4.1 Features ................................................................................................................................................. 23

4.2 Aperçu de l'appareil ............................................................................................................................... 24

5. SETUP......................................................................................................................................................... 25

5.1 Montage ................................................................................................................................................. 25

5.2 Contrôle par le son................................................................................................................................. 25

5.3 Connexion au dimmerpack .................................................................................................................... 25

6. MANIEMENT............................................................................................................................................... 26

6.1 Mode manuel ......................................................................................................................................... 26

6.2 Décoder la protection de programmation .............................................................................................. 26

6.3 Ajuster l'indication de l'affichage ............................................................................................................ 26

6.4 Mémoriser des scènes........................................................................................................................... 26

6.5 Appeler une scène ................................................................................................................................. 26

6.6 Mémoriser des chaser ........................................................................................................................... 26

6.7 Appeler un chaser.................................................................................................................................. 27

6.8 Contrôler un chaser ............................................................................................................................... 27

6.9 Éteindre des canaux DMX ..................................................................................................................... 27

6.10 Appeler plusieurs chasers.................................................................................................................... 27

6.11 Fonction Go.......................................................................................................................................... 27

6.12 Commuter tous les canaux au maximum ............................................................................................ 27

6.13 Mode Blackout ..................................................................................................................................... 27

6.14 Maniement par contrôleur de pie ......................................................................................................... 27

6.15 Coder la protection de programmation ................................................................................................ 27

6.16 Annuler tous les chasers...................................................................................................................... 27

7. PROBLÈMES.............................................................................................................................................. 28

8. NETTOYAGE ET MAINTENANCE............................................................................................................. 28

9. CARACTÉRISTIQUES TECHNIQUES....................................................................................................... 28

1. INTRODUCCIÓN......................................................................................................................................... 29

2. INSTRUCCIONES DE SEGURIDAD .......................................................................................................... 29

3. INSTRUCCIONES DE MANEJO ................................................................................................................ 30

4. DESCRIPCIÓN DEL APARATO................................................................................................................. 30

4.1 Características ....................................................................................................................................... 30

4.2 Sobrevista .............................................................................................................................................. 31

5. SETUP......................................................................................................................................................... 32

5.1 Instalación .............................................................................................................................................. 32

5.2 Control por el sonido.............................................................................................................................. 32

5.3 Conexión al dimmerpack ....................................................................................................................... 32

6. OPERACIÓN............................................................................................................................................... 33

6.1 Modo manual ......................................................................................................................................... 33

Page is loading ...

70064620X74NXS_V_1_0.DOC

15/35

USER MANUAL

KRX-16

16-channel lighting controller

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

For your own safety, please read this user manual carefully before you initially start-up.

Every person involved with the installation, operation and maintenance of this device has to

- be qualilfied

- follow the instructions of this manual

- consider this manual to be part of the total product

- keep this manual for the entire service life of the product

- pass this manual on to every further owner or user of the product

- include every supplementay update with the original manual

1. INTRODUCTION

Thank you for having chosen a EUROLITE KRX-16. You will see you acquired a powerful and versatile

device.

Unpack your KRX-16.

Before you initial start-up, please make sure that there is no damage caused by transportation. Should there

be any, consult your dealer and do not use the device.

2. SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this user manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Always plug in the power unit least.

Keep away from heaters and other heating sources!

70064620X74NXS_V_1_0.DOC

16/35

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it

on immediately. The arising condensation water might damage your device. Leave the device switched off

until it has reached room temperature.

This device falls under protection-class III. The device always has to be operated with an appropriate

transformer.

Always disconnect from the mains, when the device is not in use or before cleaning it.

Please note that damages caused by manual modifications on the device or unauthorized operation by

unqualified persons are not subject to warranty.

Keep away children and amateurs from the device!

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

3. OPERATING DETERMINATIONS

This device is a DMX-controller for controlling DMX-effects or spots in discotheques, on stages etc. This

product is allowed to be operated with a direct voltage of DC 12-20 V, 500 mA and was designed for indoor

use only.

Do not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables lying around. You endanger your own and the safety of

others!

Operate the device only after having familiarized with its functions. Do not permit operation by persons not

qualified for operating the device. Most damages are the result of unprofessional operation!

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

Never remove the serial barcode from the device as this would make the guarantee void.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, etc.

4. DESCRIPTION

4.1 Features

DMX lighting controller 16 channels

16 channel-faders with LED • Fade Time fader with LED for adjusting the step time • Master-fader with LED

for adjusting the total output level • Audio-fader with LED for adjusting the music sensitivity • Speed-fader for

adjusting the program-speed • Flash-button per channel and master-flash (Full On-button) • LED-display of

all modes • 16 built-in programs • Dimmer: Manual control of the channels via sliders • Full On: all channels

can be switched on together • Program speed adjustable via speed-fader or Tap Sync-button • Sound-control

via external signal or integrated microphone • Sound to light via RCA-socket • Foot switch connection via

1/4" stereo-jack plug • Power supply via included power unit • 19"-dimensions

70064620X74NXS_V_1_0.DOC

17/35

4.2 Overview

Overview on the control elements

eurolite

®

CH 16

KILL

AUDIO

SPEED

MASTER

FADE

TIME

CH 15

CH 14

CH 13

CH 12

CH 11

CH 10

CH 9

CH 8

CH 7

CH 6

CH 5

CH 4

CH 3

CH 2

CH 1

1

9

2

10

3

11

4

12

5

13

6

14

7

15

8

16

KRX-16 DMX

1

2

34

56

7

8

4WAY

8WAY

12 WAY

16 WAY

GLIDE

TAP SYNC

PROGRAMM GO

MANUAL

AUDIO

STEP DARK FULL ON BLACK OUT

ADD 1

ADD 2

ADD 3

FOG MACHINE

READY

PROGRAM LOCK

MIDI SIGNAL

STAND BY

MANUAL LOCK

FLASH

PATTERNS

CONTROL

PROGRAM

16 CH DIMMER CONSOLE DMX - MIDI

LOCK OPTION

1 2 3

4 5 6 7

8 9 11 12

13 14 15 16 17 18 19 21 22 23

10

20

1) CHANNEL LEDS

2) CHANNEL FADERS 1-16

These faders will adjust the output of 1 to 16 channel from 0 to 100% or 0 to 255.

3) FLASH-BUTTONS 1-16

Press to activate maximum channel output.

4) PATTERN-BUTTONS

5) PATTERN LEDS

6) ADD-BUTTONS

7) FOG MACHINE

To activate the fog machine.

8) KILL-BUTTON

9) AUDIO LEVEL FADER

Move to adjust the audio sensitivity.

10) SPEED FADER

Move to adjust chasing speed.

11) FADE TIME FADER

Move to adjust the fade time.

12) MASTER FADER

13) GLIDE-BUTTON

14) TAP SYNC

In AUTO CHASE, press it twice to define chasing speed.

15) PROGRAM-BUTTON

16) STEP-BUTTON

Press it once and the program go one step.

17) GO-BUTTON

18) DARK BUTTON

Press it to pause whole output, including FULL ON and FLASH.

19) MANUAL-BUTTON

20) FULL ON-BUTTON

When activated ,whole channel output will be maximum and disable BLACK OUT.

21) AUDIO-BUTTON

Press it to get into audio control.

22) BLACKOUT-BUTTON

This button will force all DMX to "0".

23) DISPLAY

70064620X74NXS_V_1_0.DOC

18/35

Rear panel:

OFF

ON

DC 12V~20V,

500mA min.

-

+

0.1V~1Vp-p

LINE INPUT

THRU

OUT IN

DMX POLARITY SELECT

1=Ground

2=Data -

3=DATA+

1=Ground

2=Data +

3=DATA-

DMX OUT

21

3

Full on

Black out

GND

POWER

DC INPUT

MIDI

AUDIOREMOTE

REMOTE SMOKE MACHINE

Typ/Type/Type/Tipo:

Spannungsversorgung/Power supply/Alimentation/

Alimentación:

Gesamtanschlusswert/Power consumption/Puissance de

rendement/Consumo:

KRX-16 DMX

12-20 V DC, 500 mA

10 W

®

eurolite

MADE IN CHINA

Lire le mode d'emploi avant l'utilisation. Ne pas exposer à l'humidité. Ne

jamais ouvrier le boîtier! L'intérieur de l'appareil ne contient pas de parties

nécessitant un entretien. L'entretien et les réparations seulement par un

revendeur autorisé!

Lea el manual del usuario antes de la puesta en marcha. Proteja de la hume-

dad! îNunca abrir la caja! No hay piezas que necesiten de servicio dentro del

aparato. Operaciones de mantenimiento y servicio únicamente por distribui-

dores autorizados.

Vor Gebrauch Anleitung lesen. Gerät vor Feuchtigkeit schützen! Niemals das

Gerät öffnen! Im Geräteinnern befinden sich keine zu wartenden Teile.

Wartungs- und Servicearbeiten nur durch autorisierten Fachhandel!

Read user manual before use. Keep away from moisture! Never open the

housing! There are no serviceable parts inside the device. Maintenance and

service operations only by authorized dealers.

31 32 3324 25 26 27 28 29 30

24) Power switch

25) Power supply socket

26) MIDI THRU-socket

27) MIDI OUT-socket

28) MIDI IN-socket

29) DMX output socket

30) DMX POLARITY selector

31) REMOTE-socket

32) AUDIO IN-socket

33) REMOTE SMOKE MACHINE-socket

5. SETUP

5.1 Installation

Install the device on a plane surface or install it in rack.

Rack-installation: This device is built for 19" racks (483 mm). The rack you use should be a Double-Door-

Rack where you can open the frontpanel and the rear panel. The rack should be provided with a cooling fan.

When mounting the controller into the rack, please make sure that there is enough space around the device

so that the heated air can be passed on. Steady overheating will damage your device.

You can fix the controller with four screws M6 in the rack.

Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.

5.2 Sound-control

The sound-control works via the built-in microphone or via the sound input socket.

Connect the sound-signal from the mixer (e.g. Master 2) with the RCA-socket on the rear panel (input

sensitivity 0.1 V - 1 V).

5.3 Connection with the dimmerpacks

DMX-512:

The wires must not come into contact with each other, otherwise

the fixtures will not work at all, or will not work properly.

Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with

the fixture or one fixture with another.

70064620X74NXS_V_1_0.DOC

19/35

Building a serial DMX-chain:

Connect the DMX-output of the KRX-16 with the DMX-input of the nearest dimmerpack. Always connect one

output with the input of the next fixture until all fixtures are connected.

Occupation of the XLR-connection:

You can adjust the XLR polarity via the DMX POLARITY selector.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120

Ω

resistor

between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.

6. OPERATION

After you connected the device to the mains, the KRX-16 is ready for use.

6.1 Manual-mode

In the Manual-mode (Manual-LED is lit), you can call up the individual channels manually and control them

via the channel faders. Please note that the adjusted settings cannot me memorized.

Press the Manual-button - the Manual-LED is lit.

Push Master-fader to maximum.

Push channel-faders to the desired setting.

6.2 Unlock program mode

Before you can start programming you need to unlock the program mode.

Press and hold the Step-button and Blackout-button.

Press the Program-button in order to select OFF.

Release the Program-button.

Release the Step-button and Blackout-button and the program mode is unlocked.

6.3 Switch the dimmer display

The dimmer display can be switched from percent to the DMX-value:

Press and hold the Pattern-buttons 5, 6, 7 and 8.

Switch the unit off and on again.

The Pattern-buttons 1, 2, 3 and 4 are lit. Press button 3 for percent or button 4 for DMX-value.

Press the Blackout-button twice in order to save the settings.

6.4 Memorize scenes

With the KRX-16 you can memorize up to 16 different scenes with 16 channels.

Press the Program-button and the Manual-button.

Press the desired Pattern-button where you would like to memorize the scene. The respective LED will

slowly flash.

Push the Master-fader to maximum.

Push channel-faders to the desired setting.

Press the Program-button.

Press the Blackout-button in order to memorize the scene.

6.5 Call up scenes

Press the Pattern-button where you memorized the desired scene.

Push the Master-fader to maximum.

The scene will be called up.

6.6 Memorize chasers

With the KRX-16 you can memorize 16 different chasers with up to 100 steps each.

Press the Program-button and the Manual-button.

Press the desired Pattern-button where you would like to memorize the chaser. The respective LED will

slowly flash.

Push the Master-fader to maximum.

70064620X74NXS_V_1_0.DOC

20/35

Push channel-faders to the desired setting.

Press the Program-button in order to memorize the first step.

Repeat the steps mentioned above until you have memorized all steps.

Press the Blackout-button in order to memorize the chaser.

6.7 Call up chaser

Press the Pattern-button where you memorized the desired chaser.

Push the Master-fader to maximum.

The chaser will be called up.

6.8 Run a chaser

Adjust the desired fade-time via the Fade-Fader.

Adjust the desired chaser-speed via the Speed-fader.

If the chaser is to be run sound-controlled, press the Audio-button and adjust the desired sensitivity via the

Audio-fader.

If the chaser is to be run exactly in the bass-beat, pull Speed-fader to minimum and enter the bass-beats by

pressing the Tap Sync-button repeatedly.

If the chaser is to be run step by step, pull Speed-fader to minimum and press the Step-button repeatedly.

If the chaser's steps should glide one into another, you can use the Glide-function. Deactivate chaser first,

then press the Glide-button and activate the chaser.

6.9 Switch off individual DMX-channels

You can switch off an individual channel by pressing the Kill-button and the respective Flash-button.

In order to switch the channel on again, press the Kill-button.

6.10 Call up several chasers

Via the Add-function, you can run several chasers.

Press the Pattern-button of the desired chaser.

Press the Add-button.

Press the Pattern-button of the second chaser.

Please note:

Several chasers of one group can only be run one after the other.

Several chasers of different groups can be run simultaneously.

6.11 Go-function

When the output level of a chaser should not vary as programmed, you can lock it by pressing the Go-

button.

If you press the Go-button for more than one second, the Fade Time adjustment is overrun.

6.12 Set all channels to maximum

Press the Full On-button and all channels will be set to their maximum value. As soon as you release the

button, the channels return to their original setting.

6.13 Blackout-Mode

Press the Blackout-button and all devices will be set to Blackout-mode.

Press the Dark-button and all devices will temporarily be set to Blackout-mode.

6.14 Footswitch

Connect your footswitch via the Remote-socket on the rearpanel. In this way you can select Full On or Stand

By.

6.15 Lock program mode

If you want to protect your programs from undesired acces, you can lock the program mode.

Press and hold the Step-button and Blackout-button.

Press the Program-button in order to select ON.

Release the Program-button.

70064620X74NXS_V_1_0.DOC

21/35

Release the Step-button and Blackout-button and the program mode is locked.

6.16 Returning to the factory setup

Press and hold the Pattern-buttons 3, 6, 10 and 15 and switch the unit off. Wait for aprox. 30 seconds and

switch the unit on again.

7. PROBLEM CHART

PROBLEM CAUSE REMEDY

No power. The power unit is not connected. Check the connection cable of the

power unit and any extension-cables.

No signal output. Blackout-mode activated. Switch off blackout by pressing the

Blackout-button.

8. CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no servicable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~

via 12-20 V DC, 500 mA power unit included in the delivery

Power consumption: 10 W

Number of control-channels: 16

Integrated programs: 16

Sound-control: via built-in microphone or via audio-input

Audio-input: RCA

Audio-sensitivity: 0.1 - 1 V

DMX 512-output: 3-pin XLR-connector with polarity selector

Dimensions (LxWxH): 483 x 222 x 85 mm

19" mounting dimensions with 5 u

Minimum mounting depth: 100 mm

Weight: 4.4 kg

Optional foot-switch:

EUROLITE Foot-switch with stereo jack No. 70064490

Page is loading ...

EuroLite KRX-16 User manual

EuroLite KRX-16 User manual

in other languages

Related papers

Other documents