2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Metra
  7. 99-7343

Metra 99-7343 User manual

  • Hello! I am an AI chatbot trained to assist you with the Metra 99-7343 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7343
2011 Hyundai Sonata
(For models equipped without Nav and with auto climate controls)
99-7343
•ISODINheadunitprovisionwithpocket
•DDINheadunitprovisions
•Paintedblackandsilvertomatchfactorydash
WIRING & ANTENNA CONNECTIONS(SoldSeparately)
Wire harness:
•70-73042010Kia/HyundaiHarness
•70-73052010Kia/HyundaiAmpBypassHarness
Antennaadapter:
•NotRequired
PanelRemovalTool•PhillipsScrewdriver•SocketWrench
C
A
G HF
B D E
•A)RadioHousing•B)(2)A/CVentTrimPanels
•C)DDINBrackets•D)DisplayBrackets
•E)Pocket•F)(12)1/2”Phillipsscrews
•G)(2)#8X1/4”PanHeadscrews
•H)(4)#8X3/8”TrussHeadscrews
TOOLS REQUIRED
KIT FEATURES
KIT COMPONENTS
Table of Contents
Dash Disassembly
–HyundaiSonata2011 3-4
Kit Assembly
–HyundaiSonata2011 5-6
–ISODINheadunitprovisions 7
–DOUBLEDINheadunitprovisions 7
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
99-7343
Caution
Metra recommends disconnecting the negative battery terminal before beginning any
installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
*NOTE: Refer Also to the instructions included with the aftermarket radio.
1. Unclipandremovethe2trimpanels
surroundingtheshifterandpocket.
(FigureA)
2. Remove(2)Phillipsscrewsatthe
bottomleftandrightsideoftheradio
trimpanel.(FigureB)
3. Unclipandremovetheradiotrimpanel
includingclimatecontrolandvents.
(FigureC)
4. Remove(4)Phillipsscrewssecuring
theradio.(FigureD)
5. Remove(4)Phillipsscrewssecuring
thedisplaythenremovethefactory
bracketsfromthedisplay.(FigureD)
Continued on next page
3
Dash Disassembly
99-7343
(Figure B)
(Figure C)
(Figure D)
(Figure A)
4
6. UnclipandremovetheHazardswitch
fromtheradiopanel.(FigureE)
7. Remove(2)Phillipsscrewssecuring
thepassengerairbaglightassembly.
(FigureE)
Dash Disassembly
99-7343
(Figure E)
8. Remove(4)Phillipsscrewssecuring
theclimatecontroltotheradiopanel.
(FigureE)
9. Remove(8)Phillipsscrewssecuring
thea/cventsthenunclipandremove
themfromthefactorypanel.(FigureE)
5
Kit Assembly
99-7343
(Figure B)
(Figure A) (Figure C)
1. Snapthea/cventsintothea/cvent
trimpanels.(FigureA)
2. Attachtheleftandrighta/cventtrim
panels and the climate controls to
themainradiohousingpanelusingthe
provided(10)#8X1/2”Phillipsscrews
and(2)#8X1/4”Panheadscrews.
(FigureB)
NOTE: #8X1/4” Pan head screws
must be installed in the
indicated locations.
3. Snapthehazardswitchintothemain
radiohousing.(FigureC)
Continued on next page
99-7343
6
Kit Assembly
(Figure A)
4. Attachthepassengerairbaglightto
themainradiohousingusing(2)
#8X1/2”Phillipsscrews.(FigureA)
5. Attachthedisplaybracketstothe
displayandmountitbackintothedash
inthefactorylocation.(FigureB)
Continued on next page
(Figure B)
1. Locatethefactorywiringharnessin
thedash.Metrarecommendsusingthe
propermatingadapterfromMetra
orAXXESS.Re-connectthenegative
batteryterminalandtesttheunitfor
properoperation.
2. AttachtheDDINbracketstothe
aftermarketradiousingthescrews
supplied with the radio, then secure
theassemblytothepocketusingthe
(4)supplied#8Trussheadscrews.
(FigureA)
3. Mounttheassemblyintothesubdash.
4. Reassembledashinreverseorder
ofdisassembly.
1. Locatethefactorywiringharnessinthe
dash.Metrarecommendsusingthe
propermatingadapterfromMetraor
AXXESS.Re-connectthenegative
batteryterminalandtesttheunitfor
properoperation.
2. AttachtheDoubleDINbracketstothe
aftermarketradiousingthescrews
supplied with the radio, then mount the
unitinthesubdash.(FigureB)
3. Reassembledashinreverseorder
ofdisassembly.
ISO DIN head unit provisions
Double DIN head unit provisions
99-7343
(Figure A)
(Figure B)
7
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7343
REV. 3/16/11
/