Page is loading ...
1
ET-PKD75S
Ceiling Mount Bracket
S P E C F I L E
Description
This ceiling mount bracket is to be used when mounting DLP™-based projectors to the low
ceiling.
Specifications
Vertical correction angle: +5°
Horizontal correction angle: ±2.5°
Dimensions (W x H x D): 478 x 110 x 343 mm
(18-13/16˝ x 4-5/16˝ x 13-1/2˝)
Weight: 5.2 kg (11.5 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Digital Light Processing and DLP are trademarks of Texas Instruments.
Attachment plate . . . . . . . . . . . . . . . .1
Angle adjuster . . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . .1
Washer-fitted screws (M6 x 12) . . . . .15
Washer-fitted screws (M4 x 8) . . . . . . .4
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
As of August 2004
Dimensions
unit: mm (inch)
(Dimensions given in inches are approximate.) Note: This illustration is not drawn to scale.
23629
(9-9/32˝)
129
(5-3/32˝)
215
(8-15/32˝)
(1-5/32˝)
202
(7-15/16˝)
254 (10˝)
218 (8-19/32˝)
249
(9-13/16˝)
140
(5-1/2˝)
215 (8-15/32˝)
260 (10-1/4˝)
(3-15/32˝)
Ø11 (7/16˝)
Parts
The assembled ET-PKD75S with a projector
and the ET-D75LE1 optional lens mounted
Attachment Plate
/