Page is loading ...
EP820 Series Quick Installation Guide
©Copyright 2006 AXIOMTEK Co., Ltd.
Version A1 January 2006
Printed in Taiwan
9428B820000E
1
I. Checklist
9 EP820 Board x 1
9 Quick Installation Guide x 1
9 Product Information CD-ROM x 1
9 2-pin jumper cap, Pitch=2.54mm x 5
9 2-pin jumper cap, Pitch=2.0mm x 10
9 PS/2 Keyboard/Mouse adapter x 1
9 2.5” & 3.5” HDD cable x 1
9 ATX Power Cable 10P
L=150mm
9 COM+Printer extension cables
with bracket, Pitch=2.0mm x 1
9 Audio Cable x 1
9 SATA cable x 1
9 USB Cable x 1
If there are damaged or missing parts, contact your supplier
and/or dealer immediately. Do not attempt to apply power to
the board if there is damage to any of its components.
II. Jumper Settings
Before turning on the power to the EP820 Series, please
make sure that all jumpers are on their default settings as
listed on the table below.
Jumper Default Setting Jumper Setting
JP1 CPU Type Select : Dothan A Short 1-2
JP2 LVDS1 Voltage select : 3.3V Short 1-2
JP3 LVDS2 Voltage select : 3.3V Short 1-2
JP4
CPU Voltage Select : Dothan (1.5V) <Only
Socket Version>
Short 1-2
JP5 COM1 Mode Select: RS-232 Short 1-2
JP8 COM1 Mode Select: RS-232 Short 3-5,4-6
JP11 COM1 Mode Select: RS-232 Short 3-5,4-6
JP6 Compact Flash Power Select : 3.3V Short 1-2
CN14 Pin 1: DCD Short 3-5 JP7
COM2 Mode Select
CN14 Pin 8: RI
Short 4-6
CN21 Pin 1: DCD Short 3-5
JP10
COM1 Mode
Select
CN21 Pin 9: RI
Short 4-6
JP9 Compact Flash Select : Slave Short 1-2
JP12
CPU Clock Select : Auto
<Only Socket Version>
Short 1-2
JP13 Clear CMOS Setting : Normal Short 1-2
JP14 Audio Line Out/Speaker Out: Line Out Short 1-3, 2-4
Please refer to the Product Information CD for the complete version of the User’s Manual,
drivers, and utilities for the EP820 Series CPU Card.
EP820 Series Quick Installation Guide
©Copyright 2006 AXIOMTEK Co., Ltd.
Version A1 January 2006
Printed in Taiwan
9428B820000E
2
III. EP820 Connectors
Connectors Label Connectors Label
ATX Power Connector CN1 Printer Port Connector CN13
Audio Connector CN12 PCI-104 SLOT CN3
CPU FAN Connector FAN1 Parallel IDE Connector CN9
Compact Flash Connector CN24 SATA Connector CN23
Digital I/O Connector CN10 Serial Port1 Connector CN21
DDRII SO-DIMM CN25 Serial Port2 Connector CN14
Front Panel Bezel
Connector
CN11
TV-OUT S-Video
Connector
CN4
FDD Connector CN18
TV-OUT Component
Connector
CN2
LAN1 Connector CN16
USB Port0 & Port1
Connector
CN17
LAN2 Connector CN15
USB Port2 & Port3
Connector
CN19
LVDS1 Connector CN5 VGA Connector CN22
LVDS1 Voltage
Connector
CN6
6-Pin Mini Dim Keyboard /
Mouse Connector
CN20
LVDS2 Connector CN7
LVDS2 Voltage
Connector
CN8
IV. Additional Information
User’s Manual and other documents are in
Acrobat PDF format. The Product Information
CD contains the Adobe Acrobat 3.0 Reader
installation software for user’s convenience.
The complete version of the User’s Manual, along with the drivers/utilities software
programs are in the Product Information CD of the EP820 Series CPU Card.
EP820 Series Quick Installation Guide
©Copyright 2006 AXIOMTEK Co., Ltd.
Version A1 January 2006
Printed in Taiwan
9428B820000E
3
V. Board Layout
Component Side
The complete version of the User’s Manual, along with the drivers/utilities software
programs are in the Product Information CD of the EP820 Series CPU Card.
EP820 Series Quick Installation Guide
©Copyright 2006 AXIOMTEK Co., Ltd.
Version A1 January 2006
Printed in Taiwan
9428B820000E
4
Solder Side
The complete version of the User’s Manual, along with the drivers/utilities software
programs are in the Product Information CD of the EP820 Series CPU Card.
/