SLC™ 8000 Advanced Console Manager User Guide 4
Revision History
Date Rev. Comments
March 2014 A Preliminary release.
October 2014 B Initial document for firmware release 7.1.0.0.
June 2015 C Updated for firmware release 7.2.0.0.
Changes include new operating atmosphere information and warning language in
Chinese and Korean. Software changes include additions in Telnet, SSH and TCP
timeout directions, number of sessions message, idle timeout message, VBUS
enabling, assert DTR, run web server, added mounted column information for
NFS Mounts, masked CHAP secret and DOD CHAP secret fields, USB devices in
diagnostics and addition of SSH bit option. SSL settings were removed so the
SSLv2 protocol option is no longer available.
June 2016 D Updated for firmware release 7.3.0.0.
January 2017 E Updated power cord information.
June 2017 F Updated for firmware release 7.4.0.0 and for new dual SFP transceiver port or
dual Ethernet port capability options. Updated the following:
IPv6 Neighbor Table, Ethernet Bonding Status links, and IPv6 Forward Flag
under Network Settings.
IKE v2, x.509 Certificate, Certificate Authority/Certificate File for Remote Peer,
Certificate Authority/Certificate File/Key File for Local Peer, SA Lifetime,
Remote and Dead Peer settings under Network VPN.
Enable v1/v2c, Trap Version, Alarm Delay to SNMP, and Trap User Name,
Password and Passphrase under SNMP Services.
Added ability change and reset BootCount, BootDelay and BootLimit.
September 2017 G Updated part number.
February 2018 H Updated for firmware release 7.5.0.0.
March 2018 J Updated to include additional SLC hardware and new trap information for firmware
release 7.5.0.0.
June 2018 K Updated for firmware release 7.6.0.1R6.
August 2018 L Updated fail-over gateway details for Network Settings for firmware release
7.6.0.1.
January 2019 M Updated for firmware release 7.7.0.0. Software changes include:
hostname resolution in local hosts table
extended device port timers range
new user notifications when connecting to a device port
support for iPerf3
support for dual channel USB devices
auto enable DTR on device ports
Xmodem support
device port baud rate can be set while connected to a device port
openSSH and openSSL upgraded
SNMP v3 SHA2 support
expanded support for HSPA+ gateway integration
March 2019 N Updated for firmware release 7.8.0.0.
Added support for custom Expect scripts that can be connected to the SLC CLI or
a device port.
April 2019 P Updated for firmware release 7.9.0.0.
Added support for custom Python and Tcl scripts.