Elkay BLR150C Installation guide

Category
Kitchen sinks
Type
Installation guide

This manual is also suitable for

Elkay BLR150C is a top-mount sink made of 18-gauge, type 304 nickel-bearing stainless steel. It features a lustrous satin finish and is fully undercoated to dampen sound and reduce condensation. The sink has a bowl depth of 7-1/8 inches and a 3/16-inch recess below the outside edge of the sink for the bowl and faucet deck. The sink comes with a LKDA2438 faucet and a LK36 basket strainer. It is available in a variety of configurations, including one, two, or three 1-1/4-inch or 1-1/2-inch diameter faucet holes.

Elkay BLR150C is a top-mount sink made of 18-gauge, type 304 nickel-bearing stainless steel. It features a lustrous satin finish and is fully undercoated to dampen sound and reduce condensation. The sink has a bowl depth of 7-1/8 inches and a 3/16-inch recess below the outside edge of the sink for the bowl and faucet deck. The sink comes with a LKDA2438 faucet and a LK36 basket strainer. It is available in a variety of configurations, including one, two, or three 1-1/4-inch or 1-1/2-inch diameter faucet holes.

G
ENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
B
owl Depths: 6-1/8" (156mm) (BLR[Q]1560), 7-1/8" (181mm)
(
all others).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" (5mm) below outside
edge of sink.
Finish: Exposed surfaces are hand blended to a lustrous satin
finish.
Underside: Fully undercoated to dampen sound and reduce
condensation.
These sinks comply with ASME A112.19.3-2008/CSA B45.4-08.
SINK PACKAGES
BLH15C Package includes:
(1) BLR15 Sink.
(1) LKDA2438 Faucet.
(1) LK36 Basket strainer.
BLR150C Package includes:
(1) BLR15 Sink.
(1) LKD2223 Faucet.
(1) LK36 Basket strainer.
OTHER
Drain Openings: 3-1/2" (89mm) (BLR[Q]1516), 2" (51mm) (all
others).
NOTE: Unless otherwise specified, sink is furnished with 1 faucet
hole as shown.
OPTIONAL ACCESSORIES
Bottom Grid: LKWBG12090SS (BLH15C, BLR150C, BLR[Q]15,
BLR[Q]1560).
Cutting Board: CB912.
Drains: LK36 (BLH15C, BLR150C, BLR[Q]15, BLR[Q]1560), LK99
(BLR[Q]1516).
Installation hardware for thicker countertops: LK363 (up to
1-1/2" [38mm] thick); LK463 (up to 2-1/2" [66mm] thick).
Rinsing Basket: LKWRB1209SS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2008 Elkay
(Rev. 12/08) 1-3E
elkayusa.com
M
odel BLR(Q)151
Model BLR150C
M
odel BLH15C
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Gourmet
Sink
and Sink Packages
S P E C I F I C AT I O N S
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
require ments of the Uniform Plumbing Code.
B
1-3/4"R (44mm)
1-3/4"R (44mm)
E
D
C
A
Model BLR151 Illustrated
HOLE DRILLING
CONFIGURATIONS
4"
(
102mm)
4"
(
102mm)
4"
(102mm)
4"
(102mm)
1
(1-1/4" [32mm] diameter)
2
(1-1/4" [32mm] diameter)
MR2
(1-1/2" [38mm] diameter)
3
(1-1/2" [38mm] diameter)
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
Elkay
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2008 Elkay
1-3E (Rev. 12/08)
Gourmet
Sink
and Sink Packages
S P E C I F I C AT I O N S
S
INK DIMENSIONS*
*
Length is left to right. Width is front to back.
C
utout in
N
o. of 1
1
/4"
O
verall Inside Bowl
C
ountertop
(
32mm) or 1
1
/2"
U
-Channel Quick-Clip
®
(
1
1
/2"
[38mm]
(
38mm) Dia. Minimum
M
odel Model
L
WLWDRadius Corners)
D
rain Faucet Holes Cabinet
N
umber Number ABCDELWOpening 4" (102mm) Centers Size
BLH15C 15 15 12 9
1
/4 7
1
/8 14
3
/8 14
3
/8 2318
(381mm) (381mm) (305mm) (235mm) (181mm) (365mm) (365mm) (51mm) (457mm)
BLR150C 15 15 12 9
1
/4 7
1
/8 14
3
/8 14
3
/8 2118
(381mm) (381mm) (305mm) (235mm) (181mm) (365mm) (365mm) (51mm) (457mm)
BLR15 BLRQ15 15 15 12 9
1
/4 7
1
/8 14
3
/8 14
3
/8 2 1, 2, MR2 or 3 18
(381mm) (381mm) (305mm) (235mm) (181mm) (365mm) (365mm) (51mm) (457mm)
BLR1516 BLRQ1516 15 15 12 9
1
/4 7
1
/8 14
3
/8 14
3
/8 3
1
2 1, 2, MR2 or 3 18
(381mm) (381mm) (305mm) (235mm) (181mm) (365mm) (365mm) (89mm) (457mm)
BLR1560 BLRQ1560 15 15 12 9
1
/4 6
1
/8 14
3
/8 14
3
/8 2 1, 2, MR2 or 3 18
(381mm) (381mm) (305mm) (235mm) (156mm) (365mm) (365mm) (51mm) (457mm)
  • Page 1 1
  • Page 2 2

Elkay BLR150C Installation guide

Category
Kitchen sinks
Type
Installation guide
This manual is also suitable for

Elkay BLR150C is a top-mount sink made of 18-gauge, type 304 nickel-bearing stainless steel. It features a lustrous satin finish and is fully undercoated to dampen sound and reduce condensation. The sink has a bowl depth of 7-1/8 inches and a 3/16-inch recess below the outside edge of the sink for the bowl and faucet deck. The sink comes with a LKDA2438 faucet and a LK36 basket strainer. It is available in a variety of configurations, including one, two, or three 1-1/4-inch or 1-1/2-inch diameter faucet holes.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI