Home Zone Security ELI1072G User manual

Brand
Home Zone Security
Model
ELI1072G
Type
User manual
2PK Solar Motion
Sensor Wall Light
ELI1072G
INSTALLATION INSTRUCTIONS
the bright way to do home security.
securit y
1
600
2
4 back of the unit.
4
Test the light by pressing the power button on the
back. Cover the solar panel completely to check if
the two side lights turn on. If the lights do not turn
on, the battery needs to be recharged. Place
product under sunlight to charge.
Note: Remove any plastic film over the solar
panel. This must be removed prior to use.
It is better that the light fixture is mounted
approximately 6.5 ft. (2m) above the ground.
Always ensure that the solar light is only supplied with the specified rated
rechargeable battery.
3
FCC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This device complies with FCC Part 15 of FCC Rules.
Warning
: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE
: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Get exclusive offers and deals
when you subscribe!
Thank you for choosing Home Zone Security!
We are here to support you every step of the way.
Please be sure to contact our customer support for troubleshooting
and register your product for additional benefits. Products must be
sold by an authorized reseller or distributor to be valid.
• Receive your extended warranty
• Get professional warranty support
• Be the first to hear the latest product news.
• Get exclusive deals delivered to you email.
Scan below for link:
homezonesecurity.com
support@homezone-usa.com
US: +1 888-782-5618
Register & Subscribe today to protect your investment and join our email list!
Why Register?
securit y
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Home Zone Security ELI1072G User manual

Brand
Home Zone Security
Model
ELI1072G
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents