Solar Deck Light (6-Pack)
Model No. ELI1301G
securit y
(888) 782-5618
www.homezonesecurity.com
securit y
1.2V AA 800mAh
Figure 1
• Use a screwdriver to remove the 2 screws on the back of the unit.
• Flip the switch to select warm white or color light.
• Put the transparent lamp back in place and tighten the two screws.
Figure 1
Figure 2
Figure 2
• Choose desired wall location. Drill two holes (6mm) on
the wall. Insert the plastic anchors and use the screws
to mount the light to the wall.
Note: Lights with solar panels may have a protective film over the solar panel. This must be removed
prior to use.
switch
Warning, only rechargeable battery should be used.
1. Use a screwdriver to remove the 2 screws on the back of the unit.
2. Open the battery chamber cover by loosening the screws.
3. Replace the old battery with new battery making sure the polarity is correct.
4. Place back the battery chamber cover by tightening the 2 screws.
5. Put the transparent lamp back in place and tighten the screws.