Assembly Instructions: 3604-S (Duncan)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Carefully remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit breaker
andcompletelyremovetheoldxturefromthewall,includingthe
oldmountingstrap.
Fromthepartsbagremovethemountingstrapassembly.
MountingStrap(B)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholesin
canopy(G).Threadtwoofmountingscrews(C)intomounting
strap(B).Whenplacedoverthemountingstrap,thethreaded
endsofmountingscrews(C)willprotrudethroughtheholesof
canopy(G).Placemountingstrap(B)overthejunctionboxso
thatmountingscrews(C)arevertical.Attachmountingstrap(B)
tothejunctionboxusingtwoofmountingscrews(A).Tightenthe
screws securely.
ASSEMBLING THE FIXTURE
Bymeasuringdeterminecorrectnumberofrodsneededfor
properhangingheight.*Thisxtureincludes4rods(6”,12”,12”,
12”).Toshortenthexture,slidetheexcessrodsoffthewires.To
lengthen,addadditionalrodstothewires.Pullthexture’swires
throughrods(H,I,J,K)untiltautandthreadtherodstogether.
Thenthreadthebottomrodontothethreadsofxturebody(L).
Threadthetoprodtothethreadsoftheswiveljointoncanopy
(G).
CONNECTING THE WIRES
Haveanassistantsupportthextureweightwhilecompleting
thewiring.Cutawayexcesswires.Threadthexture’swires
throughcanopy(G).Attachthexture’swirestothepowersupply
wiresfromthejunctionbox.Connectblacktoblack(orsmooth);
whitetowhite(orribbed);groundtoground(greenorcopper).
Twisttheendsofthewirepairstogether.Thentwistonawire
connector. Make sure all twists are in the same direction. If there
isnogroundwire(greenorcopper)fromthejunctionbox,locate
thegroundscrewonmountingstrap(B)andwrapthexture’s
groundwirearoundthegreengroundscrew.Useascrewdriverto
securethegroundscrewontomountingstrap(B).Tuckallwires
neatlyintothejunctionbox.
FINISHING THE INSTALLATION
Pushcanopy(G)uptotheceilingandovermountingstrap(B)
sothatmountingscrews(C)protrudethroughcanopy(G).Twist
deconuts(F)ontothethreadsofmountingscrews(C)tosecure
thecanopyinplace.Holdshade(M)uptoxturebody(Y)and
slidespacer(Q)ontothesocket.Secureinplacebythreading
socketring(R)ontothesocketuntiltight.
Your installation is now complete. Turn on the power and test the
xture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
H
A
F
C
B
G
Q
M
JUNCTION
BOX
I
J
K
R
Y
L