Patio Festival PF19105-105-221-G Operating instructions

Brand: Patio Festival

Model: PF19105-105-221-G

Type: Operating instructions

This manual is also suitable for

ASSEMBLY INSTRUCTIONS

Connect chair back (A) with seat base (B) and armrests (C and D).

M6*30 bolts (I) are used. Please do not tighten bolts to the end at this step.

Connect chair seat support beams (G) with backrest (C and D).

M6*15 bolts (H) are used. Please do not tighten bolts to the end at this step.

Connect chair seat support frame (E) with seat base (B). M8*20 bolts (J) are used.

Please tighten bolts to the end at this step.

Insert the assemblied chair seat part into swivel base (F).

Stick the hook & loop velcro

of backrest and seat board.

Finish and enjoy your chair.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

M6*15

M6*30

M8*20

Part # Reference Image QTY

ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.

In order to facilitate the assembly and make your ﬁnal product ﬁrm and stable, please tighten by a few rounds each screw one by one.

The assembly requires minimal level of DIY skills if you follow the instructions carefully. In case you encounter any diﬃculty or have any questions, feel free to contact

the store or manufacturer.

ASSEMBLY INSTRUCTIONS

STEP 1

STEP 2

STEP 3

G G

Part# Reference Image QTY

Screw table leg support ring (C) to table legs.

Make sure all screws are inserted properly and tighten all screws to the end.

M6*20

Place table top frame (A) on the ground, then screw table legs (B) to it.

Please do not tighten any screws to the end at this step.

Place table top tiles (D) and umbrella hole board (E) on the table frame properly, then place umbrella hole lid (H).

Finish and enjoy your table.

ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.

In order to facilitate the assembly and make your ﬁnal product ﬁrm and stable, please tighten by a few rounds each screw one by one. After all screws are

connected, then you start to tighten each screw to the end.

DO NOT tighten any screw to the end before you’ve connected all screws.

The assembly requires minimal level of DIY skills if you follow the instructions carefully. In case you encounter any diﬃculty or have any questions, feel free to

contact the store or manufacturer.