WIRING ROBERTSHAW VSI TO ROBERTSHAW 5500 M SERIES
VSI Switch 5500M (MPA) Switch
P connect to P
Pilot Pilot connect to P
(L2)
(P)
(L1)
(H1)
(HC)
(L2)
(P)
(L1)
(H1)
(HC)
0.75
0.75
1.10
MAX DISTANCE
0.614
1.50
0.8860.886
1.77
(4X) 8-32 MOUNTING NUTS
WIRING SCHEMATIC
WARNING: The rear housing has a ¼”
diameter hole which is an access point to
be used ONLY by qualied personnel for
insuring proper assembly and calibra-
on of the switch. Any tampering with
internal components or altering factory
sengs of this switch will possibly dam-
age other electrical components on the
appliance and will immediately VOID the
WARRANTY of the switch.
MOUNTING DIMENSIONS
5500M Series Replaces
ORDERING INFORMATION
SLIP-FIT® DIAL ASSEMBLY
NOTE: IT IS ESSENTIAL TO READ EACH STEP COMPLETELY BEFORE
PERFORMING THE DIRECTIONS GIVEN IN THAT STEP.
For Technical Service