Outputs: Each output is fused with self-resetting SmartFuses.™ Indicator: LED indication of AD and DC power.

P R O D U C T I N F O R M AT I O N

F E AT U R E S

• 4, 8 or 16 output models

• Intelligent fuses to improve

operational time

• Built-in surge protection

• UL Listed units available

• Sleek cabinet design

Wren®, the Wren logo, The Power to See Your Business, Wren IP Solutions, No Tools Required and Solution Set Series are trademarks of Wren. The trademarks that are

followed by ® are registered trademarks in the U.S. All other trademarks and/or registered trademarks mentioned herein are properties of their respective owners and are

used for reference purposes only. The use of these trademarks does not indicate any affiliation with or sponsorship of or by Wren. ©2007 Wren. All rights reserved.

7L305 Rev-D (03.06.07)

MD 7-2-210-12

Wren, 124 Wren Parkway, Jefferson City, MO 65109 USA

telephone (573) 893-2249 toll-free (800) 881-2249 facsimile (877) 893-2317

solutions@wrensolutions.com wrensolutions.com

The Wren Master Power Supply series provides reliable and durable power systems

for indoor and outdoor video applications. They are easy to install and use, and

resetting fuses. Each board has fused protection for the input to the printed circuit

boards (PCB).

The attractive, corrosion-resistant metal housing has a beige powder-coat finish and

is suitable for industrial use as well as public areas where aesthetics are important.

Wiring connections are simple and require only a screwdriver for installation. A wiring

sheet and instructions are on the inside of the cabinet door for quick reference.

Each output board has an “on/off ” switch to power up or down selective devices and

an LED so you can quickly verify that 120VAC power is being received. Troubleshooting

is easy with LEDs that indicate power input and power output statuses.