Symmons SK-0349-AG Installation guide

Type
Installation guide

This manual is also suitable for

Symmons SK-0349-AG is a single handle kitchen faucet with an integrated air gap. It features a single hole mount configuration, ceramic cartridge, 3/8" compression connections and standard 2.2 gpm (8.3 L/min) aerator. The faucet is made of metal and plated in standard polished chrome finish. Optional 1.5 gpm (5.7 L/min) aerator and stainless steel finish are available. The faucet complies with ASME A112.18.1/CSA B125.1, ASME A112.1.3, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

Symmons SK-0349-AG is a single handle kitchen faucet with an integrated air gap. It features a single hole mount configuration, ceramic cartridge, 3/8" compression connections and standard 2.2 gpm (8.3 L/min) aerator. The faucet is made of metal and plated in standard polished chrome finish. Optional 1.5 gpm (5.7 L/min) aerator and stainless steel finish are available. The faucet complies with ASME A112.18.1/CSA B125.1, ASME A112.1.3, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

DS Creations
Feature Highlights Options/Modifications
SK-0349-AG
Single Handle Kitchen Faucet with Integrated AirGap
Installation Guide
Compliance
c
-ASME A112.18.1/CSA B125.1
-ASME A112.1.3
-NSF/ANSI 61.9, NSF/ANSI 372
Model Numbers
SK-0349-AG
Single Handle Kitchen Faucet with Integrated Air Gap
Dimensions
CG
Note: Append appropriate -sufx to model number.
Limited Lifetime - to the original end purchaser in consumer/residential
installations.
5 Years - for industrial/commercial installations.
Go to www.symmons.com/warranty for complete warranty information.
Warranty
-1.5 1.5 gpm (5.7 L/min) aerator
-STS Stainless Steel
Measurements
A 3-3/8", 86 mm
B
Deck Ref.
Min. 3/4", 19 mm
Max. 2-1/4", 57 mm
C
Hole Size
Min. Ø 1-5/8", 41 mm
Max. Ø 1-3/4", 44 mm
D 13-5/16", 338 mm
E 9-15/16", 252 mm
FTo Backsplash
2", 51 mm
EE
BB
CC
DD
AA FF
DISHWASHERDISHWASHER
SINK DRAINSINK DRAIN
HOT SUPPLYHOT SUPPLY
COLD SUPPLYCOLD SUPPLY
Note: Dimensions subject to change without notice.
Single Handle Kitchen Faucet with Integrated AirGap shall include
single hole mount conguration, ceramic cartridge, 3/8" compression
connections and standard 2.2 gpm (8.3 L/min) aerator. Faucet shall be
metal construction, plated in standard polished chrome nish.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-2549 REV A 012418
Parts Breakdown
Replacement Parts
Item Description Part Number
A1.5 Aerator
2.2 Aerator
RK-056-1.5
RK-056-2.2
B Cartridge KN-4
C
D
Handle
Set Screw RK-037
E
F
G
Mounting Washer
Mounting Nut
Mounting Screws
RK-038
A
B
C
D
E
F
G
3/8” COMPRESSION
Notes:
1) Apply a bead of silicone around the perimeter of trim installed ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2 mm)
Phillips Head
Screwdriver
Plumber Tape
Silicone
  • Page 1 1
  • Page 2 2

Symmons SK-0349-AG Installation guide

Type
Installation guide
This manual is also suitable for

Symmons SK-0349-AG is a single handle kitchen faucet with an integrated air gap. It features a single hole mount configuration, ceramic cartridge, 3/8" compression connections and standard 2.2 gpm (8.3 L/min) aerator. The faucet is made of metal and plated in standard polished chrome finish. Optional 1.5 gpm (5.7 L/min) aerator and stainless steel finish are available. The faucet complies with ASME A112.18.1/CSA B125.1, ASME A112.1.3, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI