Symmons SK-3500-2-1.5 Installation guide

Type
Installation guide

This manual is also suitable for

Symmons SK-3500-2-1.5 is a single-handle kitchen faucet with a side spray. It has a single-hole mount configuration, ceramic cartridge, 3/8" compression connections, and a standard 2.2 gpm (8.3 L/min) aerator. The faucet is made from metal construction, plated in a standard polished chrome finish. The side spray provides additional functionality for rinsing dishes or cleaning the sink. The faucet is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

Symmons SK-3500-2-1.5 is a single-handle kitchen faucet with a side spray. It has a single-hole mount configuration, ceramic cartridge, 3/8" compression connections, and a standard 2.2 gpm (8.3 L/min) aerator. The faucet is made from metal construction, plated in a standard polished chrome finish. The side spray provides additional functionality for rinsing dishes or cleaning the sink. The faucet is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

Sereno®
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SK-3500-2
Single Handle Kitchen Faucet with Side Spray
Installation Guide
SK-3500-2
Single Handle Kitchen Faucet with Side Spray
Single Handle Kitchen Faucet with Side Spray shall include
single hole mount conguration, ceramic cartridge,
3/8" compression connections and standard 2.2 gpm
(8.3 L/min) aerator. Faucet shall be made from metal
construction, plated in standard polished chrome nish.
Dimensions
Measurements
A 4-3/8", 111 mm
B Ø 1-7/8", 48 mm
C 1", 25 mm
D Ø 1-7/8", 48 mm
E 4-1/8", 105 mm
F
Deck Thickness Ref.
Min. 1", 25 mm
Max. 1-1/4", 32 mm
G Hole Size
Ø 1-1/2", 38 mm
H Hole Size
Ø 1-1/4", 32 mm
I 7-1/4", 184 mm
J 9-3/8", 238 mm
K 5-1/2", 140 mm
L 15-1/8", 384 mm
M 3/8" compression tting
EE
FF
BB
AA
GG
LL
CC
JJ
MM
HH
DD
KK
II
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372 c
Note: Dimensions subject to change without notice.
-1.5 1.5 gpm (5.7 L/min) flow restrictor
Modifications
Note: Append appropriate -sufx to model number.
CG
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. symmons.com [email protected] ZV-2066 REV D 052919
Parts Breakdown
Replacement Parts
Item Description Part Number
A Cartridge KN-4
B1.5 Aerator
2.2 Aerator
FLR-121-1.5
LN-15
C
G
Side Spray
Hose RK-048
DHandle &
Set Screw RK-047
E
F
Mounting Flange
Mounting Nut RK-059
B
A
D
3/8” COMPRESSION
E
F
C
G
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2 mm)
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Installation Notes:
1) Apply a bead of clear silicone around the
perimeter of all faucet trim installed to deck
surface.
2) Apply plumber tape to threaded
connections as necessary.
DO NOT use plumber tape on ttings with
face seal washers or o-rings.
3) DO NOT OVERTIGHTEN ttings with face
seal washers or o-rings.
  • Page 1 1
  • Page 2 2

Symmons SK-3500-2-1.5 Installation guide

Type
Installation guide
This manual is also suitable for

Symmons SK-3500-2-1.5 is a single-handle kitchen faucet with a side spray. It has a single-hole mount configuration, ceramic cartridge, 3/8" compression connections, and a standard 2.2 gpm (8.3 L/min) aerator. The faucet is made from metal construction, plated in a standard polished chrome finish. The side spray provides additional functionality for rinsing dishes or cleaning the sink. The faucet is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, and NSF/ANSI 372 standards.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI