Product Information
Applicable product:
Drop-in kitchen sink with two holes K-5841-2
Drop-in kitchen sink with four holes K-5841-4
Under-mount kitchen sink with four holes K-5841-4U
Fixture*:
Sink
Bowl area, large 17-1/8″ (435 mm) x
18-5/16″ (465 mm)
Bowl area, medium 11-1/16″ (281 mm) x
17-5/16″ (440 mm)
Bowl depth 9″ (229 mm)
Drain hole Ø 3-7/8″ (98 mm)
Faucet hole
Drop-in models Ø 1-3/8″ (35 mm)
Under-mount model Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included component:
Cut-out template 1148647-7
Undermount sink kit 23″ (584 mm) 1054375
Recommended accessories:
P-Trap K-9000
Optional accessories:
Bottom bowl rack, left bowl K-6160
Bottom bowl rack, right bowl K-6162
Duostrainer
®
sink strainer K-8801
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Fixture conforms to standard ASME A112.19.1/CSA B45.2. All
dimensions are nominal.
K-5841-4
33" (838 mm)
9-5/8"
(244 mm)
18-1/8"
(460 mm)
7-11/16"
(195 mm)
22" (559 mm)
9/16"
(14 mm)
6-3/4"
(171 mm)
2-5/16"
(59 mm)
4" (102 mm)
2-1/4"
(57 mm)
2-1/4"
(57 mm)
13-1/2"
(343 mm)
4" (102 mm)
2-5/16"
(59 mm)
2-1/4"
(57 mm)
K-5841-2
13-1/2"
(343 mm)
2-5/16"
(59 mm)
2-1/4"
(57 mm)
13-1/2"
(343 mm)
4" (102 mm)
4" (102 mm)
K-5841-4U
15"
(381 mm)
1-1/2" OD
9-1/4"
(235 mm)
1-1/2" OD
2-1/4"
(57 mm)
2-1/4"
(57 mm)
Roughing-In
K-5841
OFFSET KITCHEN SINK
OFFSET KITCHEN SINK
1148646-1-
C
/
