Kichler Lighting 52263OZ User manual

Brand
Kichler Lighting
Model
52263OZ
Type
User manual

Kichler Lighting 52263OZ is a versatile and stylish lighting fixture that can be used to illuminate a variety of spaces, including living rooms, bedrooms, and dining rooms. The fixture can be mounted on a ceiling or wall, and it comes with all the necessary hardware for easy installation. The 52263OZ features a sleek, modern design with a brushed nickel finish that will complement any décor. The fixture uses three 60-watt bulbs (not included), and it provides ample light for any space. Additionally, the 52263OZ is dimmable, so you can customize the light output to your desired level.

Kichler Lighting 52263OZ is a versatile and stylish lighting fixture that can be used to illuminate a variety of spaces, including living rooms, bedrooms, and dining rooms. The fixture can be mounted on a ceiling or wall, and it comes with all the necessary hardware for easy installation. The 52263OZ features a sleek, modern design with a brushed nickel finish that will complement any décor. The fixture uses three 60-watt bulbs (not included), and it provides ample light for any space. Additionally, the 52263OZ is dimmable, so you can customize the light output to your desired level.

IS-52263-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
8) On opposite side of xture (without xture wires), place lockwasher[E] onto
end of short threaded tube protruding from inside canopy. Thread hexnut[F]
onto end of short threaded tube.
9) Take threaded pipe[J] from parts bag and screw in mounng strap[G] a
minimum of 6 mm (1/4”). Lock into place with hexnut[K].
10) Run another hexnut down threaded pipe almost touching rst hexnut.
Mounng strap must be posioned with extruded thread faced into outlet
box[C]. Threaded pipe must protrude out the back of mounng strap. Screw
third hexnut onto end of threaded pipe protruding from back of mounng
strap.
11) Aach mounng strap to outlet box[C] using the strap mounng screws[I].
Mounng strap can be adjusted to suit posion of xture.
12) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a hole and two raised
dimples, wrap ground wire from outlet box around green ground screw,
and thread into hole.
b) On xtures where a cupped washer is provided,aach ground wire from
outlet box under cupped washer and green ground screw, then thread
into mounng strap.
If xture is provided with ground wire, connect xture ground wire to outlet
box ground wire with wire connector aer following the above steps. Never
connect ground wire to black or white power supply wires.
13) Make wire connecon. Reference chart below for correct connecons and
wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth
(see illus.)
Neutral Wire
14) Push xture to ceiling, carefully passing threaded pipe through hole in
canopy[H].
NOTE: Be certain wires do not get pinched between mounng strap and
canopy, or canopy and ceiling.
15) Use hexnut[D] to secure xture to ceiling.
16) Screw nial[N] on threads protruding from hexnut to cover hexnut.
17) Place the glass[P] over the sockets and secure into place with the glass
retainers[Q].
18) Insert recommended bulbs. (Not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fusebox before
starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance with the Naonal Electrical
Code (NEC) and all local code specicaons. If you are not familiar with code
requirements, installaon by a cered electrician is recommended.
CLEANING:
• Always be certain that electric current is turned o before cleaning.
• Only a so damp cloth should be used. Harsh cleaning products may damage
the nish.
Installaon Instrucons
[A] Stems
[B] Short Threaded
Tubes
[C] Outlet Box
[D] Hexnut
[E] Lockwasher
[F] Hexnut
[G] Mounting Strap
[H] Canopy
[I] Strap Mounting
Screws
[J] Threaded Pipe
[K] Hexnut
[L] Second Loop
[M] Chain Link
[N] Finial
[O] Coupling
[P] Glass
[Q] Glass Retainer
[R] First Loop
RIGID STEM MOUNT
1) On side of xture with xture wires, Pass xture wires through stems[A] and
short threaded tubes[B] and screw stems into coupling[O] on xture body.
2) On opposite side of xture (without xture wires) screw a second set of
stems together using short threaded tubes (same number of stems and short
threaded tubes from previous step but without xture wire) and screw stems
into opposite coupling on xture body.
NOTE: Thread locking compound must be applied to all stem threads as
noted with symbol (4) to prevent accidental rotaon of xture during
cleaning, relamping, etc.
3) On side of xture with xture wires, pass xture wires through one short
threaded tube[B]. Screw short threaded tube onto top of stem.
4) On opposite side of xture (without xture wires), screw one short threaded
tube onto top of stem.
5) Pass xture wires through hole in canopy[H]. Lower canopy down towards
stems. Pass holes in canopy over ends of short threaded tubes on top of the
stems.
6) On side of xture with xture wires, pass xture wires through
lockwasher[E]. Place lockwasher onto end of short threaded tube protruding
from inside canopy.
7) Pass xture wires through hexnut[F]. Thread hexnut onto end of short
threaded tube.
NOTE: Fixture wires should not be cut shorter than 20 inches from above the
canopy.
Installaon Instrucons (connued)
LOOP / CHAIN LINK MOUNT
1) Follow steps 1 and 2 from “Rigid Stem Mount” Instrucons.
2) Thread one short threaded tube[B] into end of each small loop[R, L].
3) On side of xture with xture wires, pass xture wires through rst loop[R].
Thread rst loop onto end of last stem.
4) Pass xture wires through second loop[L] and through hole in canopy[H]. Pass
short threaded tube at end of second loop through hole in canopy.
5) Pass xture wires through lockwasher[E]. Place lockwasher onto end of short
threaded tube protruding from inside canopy.
6) Pass xture wires through hexnut[F]. Thread hexnut onto end of short threaded
tube.
NOTE: Fixture wires should not be cut shorter than 20 inches from above the
canopy.
7) On opposite side of xture (without xture wires), Thread rst loop[R] onto
end of last stem. Pass threaded pipe at end of second loop[L] through hole in
canopy.
8) Place lockwasher[E] onto end of short threaded tube protruding from inside
canopy. Thread hexnut[F] onto end of short threaded tube.
9) Aach open chain link[M] to small loops at end of each stem and to small loops
on canopy and close the open chain link by placing a piece of cloth over the
open link and using a pair of pliers gently squeeze the link closed.
10) Follow steps 9 - 18 from “Rigid Stem Mount” Instrucons.
C
G
K
I
J
F
E
H
A
B
►
B
L
►
►
R
D
N
►
►
►
O
P
Q
M
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 52263OZ User manual

Brand
Kichler Lighting
Model
52263OZ
Type
User manual

Kichler Lighting 52263OZ is a versatile and stylish lighting fixture that can be used to illuminate a variety of spaces, including living rooms, bedrooms, and dining rooms. The fixture can be mounted on a ceiling or wall, and it comes with all the necessary hardware for easy installation. The 52263OZ features a sleek, modern design with a brushed nickel finish that will complement any décor. The fixture uses three 60-watt bulbs (not included), and it provides ample light for any space. Additionally, the 52263OZ is dimmable, so you can customize the light output to your desired level.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents