Cooper Lighting ASYX 2 - DP - Dual Pendant Installation guide

Type
Installation guide

This manual is also suitable for

Cooper Lighting ASYX 2 - DP - Dual Pendant is an innovative lighting solution designed for illuminating architectural features and providing ambient light.

It combines the benefits of both forward and wide distributions, allowing you to customize the lighting effect to suit your specific needs. With four different color temperatures to choose from, you can create the perfect ambiance for any space.

The IP66 rating ensures that the fixture is protected against dust and water, making it suitable for both indoor and outdoor applications. The heavy-wall die-cast aluminum end caps and extruded aluminum housing provide durability and longevity, while the electrostatically charged polyester powder coat paint offers superior protection against fade and wear.

Cooper Lighting ASYX 2 - DP - Dual Pendant is an innovative lighting solution designed for illuminating architectural features and providing ambient light.

It combines the benefits of both forward and wide distributions, allowing you to customize the lighting effect to suit your specific needs. With four different color temperatures to choose from, you can create the perfect ambiance for any space.

The IP66 rating ensures that the fixture is protected against dust and water, making it suitable for both indoor and outdoor applications. The heavy-wall die-cast aluminum end caps and extruded aluminum housing provide durability and longevity, while the electrostatically charged polyester powder coat paint offers superior protection against fade and wear.

INS #
Brand Logo
reversed out of
black
INS #
IL525003EN
WARNING
Risk of Fire/Electric Shock. If not qualified, consult
an electrician.
ASYX 2.0
Quad Pendant Swivel Mount
Installation Instructions
Description: The ASYX 2.0 second generation of asymmetric lighting is designed for general ambient illumina-
tion and accenting architectural features. The luminaire allows for both forward and wide distributions as well
four different color temperatures to accommodate any space. IP66 rated. Construction: Heavy-wall die cast alu-
minum end caps with extruded aluminum housing. Housing fins allow for air flow and thermal management.
Fixture housing is coated using electrostatically charged polyester powder coat paint for superior protection
against fade and wear.
WARNING
Risk of Electric Shock. Disconnect power at fuse or
circuit breaker before installing or servicing.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
WARNING
Proper grounding is required to ensure personal
safety.
ote:N Fixture in compliance with UL 1598 and UL
ote:N To prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or any
sharp objects.
ote:N MAX ambient temperature 40°C for all fixture
except L6 which is rated to 30°C ambient.
ote:N All electrical wire from junction box to fixture
head to be provided by others and follow local
codes.
ote:N Ensure mounting surface can support fixture
head(s) and entire pendant assembly.
ote:N Before installation, please check the weight of
ASYX fixtures to ensure loading capacity of the
building mount base (provided by others) to
be suitable for the weight of the entire fixture
including pendant mount means. Installation
shall comply with local codes. Ensure mounting
surface can support fixture head(s) and entire
pendant assembly. Max weight of Quad Pendant
250lbs.
ote:N Ensure all screws are torqued to proper settings.
ote:N Ensure mounting hardware is minimum of 3/8”
grade 2 hardware (stainless is required if in cor-
rosive environment) with minimum proof load of
3000 lb.
WARNING
Risk of burn. Use protective gear to ensure to ensure
personal safety.
ote:N This product must be installed in accordance
with the applicable installation code by a certi-
fied electrician, familiar with the construction
and operation of the product and hazards
involved.
ote:N Wet locations listed.
WARNING
Disconnect all power before proceeding with
installation.
2
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
ASYX 2.0 Installation Instructions - Pendant
3. Mounting Plate. Provide adequate backing
and support for fixture head(s) and entire
pendant assembly. See (Figure 3.) for
mounting hole locations.
1. Unpack ASYX 2.0 pendant fixture and ensure that all included parts are present. (Figure 1.)
Figure 1.
INSTALLATION
Bolts by
others.
Ensure
adequate
support
3. Measure stem length. Supply electrical wires, that equal
the stem length plus additional 1-2 ft as needed. Locate
ceiling junction box and connect line voltage power leads
to the measured out electrical wires as shown and connect
dimming wires if applicable. Cap dimming wires if not used.
Connect wires with provided waterproof wire nuts. Tuck all
wires and waterproof wire nuts into junction box (after Step
4.b ) (Figure 3.)
Note:
Not included and to be provided by others:
- All electrical wires (other than
from fixture head)
- 3/8” diameter mounting hardware
(ensure adequate support )
Dimming Leads
(if dimmers are used)
Line Voltage
Leads
2. Mounting Plate. Provide adequate backing and
support for fixture head(s) and entire pendant
assembly. See (Figure 2.) for mounting hole
locations.
Figure 3.
Black - Hot
White - Neutral
Green - Ground
Purple - 0-10V (+)
Gray - 0-10V (-)
Wiring Table:
IL525003EN
2 of 6
07/13/2017
Fixture Head
(4 for quad
pendant)
Decorative
Cover
Stem
Mounting Plate
Waterproof
wirenuts
Extruded Joiner (attached to base of stem)
Fixture Head
Joiner (4)
Quad Base
(4) #1/4-20
screws
(2) #10-32 screws
(12) #1/4-20
screws
Figure 2.
6”
6”
9.5” diam
Ground Strap
ASYX 2.0 Installation Instructions - Pendant
3
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
Figure 4.a
Figure 6.
6. Continue to feed all wires, including ground,
through the stem (Figure 6). Tighten down 1/2”-
13x1 bolts to secure movement of ball. Apply
Locktite 263 (included) onto threaded rod and
twist into aluminum ball assembly until fully
secure.
IL525003EN
3 of 6
07/13/2017
4. Unpack Sloped Canopy and mounting plate
assembly (Figure 4.a). Unscrew screws and
seperate decorative cover. Save decorative cover
and screws. (Figure 4.b). Attach decorative cover
after Step 13 with (2)#10-32 screws as provided.
Figure 4.b
5. Feed all connected line voltage wires through
center hole of mounting plate. Attach mounting
plate to surface with recommended bolts (as
noted on page 1) and ensure adequate support
of surface. Figure 5.
Figure 5.
Apply Locktite
to threads
ASYX 2.0 Installation Instructions - Pendant
4
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
7. As needed loosen (4) 1/2”- 13x1 bolts slightly to
allow ball freedom of movement . Ensure the
pendant is hanging vertical and rotated properly
for final position. Tighten (4) 1/2”- 13x1 bolts to
min of 30 ft-lbs torque. (Figure 7.)
Figure 7.
IL525003EN
4 of 6
07/13/2017
9. Attach and secure pendant stem to Quad Base
with (4) #1/4-20. Attach and secure. Ensure all
pendant screws are tightened to 4ft-lbs. Position
all wires exiting bottom of stem as shown in
Figure 9. (Figure 9.)
Figure 9.
Figure 8.a
8. Unpack Quad Base (Figure 8.a) and remove
Quad joiners from each quadrant. Save all
hardware and screws. (Figure 8.b). See Step 9
for further details.
Figure 8.b
ASYX 2.0 Installation Instructions - Pendant
5
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
10. Base of pendant: Pull wires then attach Fixture Head Joiner, attach each Fixture Head Joiner to each fixture head
with (2) #1/4-20 screws. (Figure 10.a). Pull electrical wires though each Fixture Head Joiner. (Figure 10.b)
Fixture Head Joiner
Figure 10.b
Figure 10.a
ASYX 2.0 Installation Instructions - Pendant
6
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
Figure 11.
12 . Use (2) #1/4-20 screws to attach each Fixture Head to Quad Base. (Figure 12). Connect all like colored electrical
wires together with silicone wire nuts. Example, wire all black wires together. For the ground wire, connect all
green wires (from pendant stem and heads) to ground wire attached to Extruded Joiner. (Figure 12.)
11. Take each Fixture Head with Extruded Head Joiner and attach to Quad Base. Pull all electrical wires down through
Quad Base bottom. (Figure 11.)
Black - Hot
White - Neutral
Green - Ground
Purple - 0-10V (+)
Gray - 0-10V (-)
Wiring Table:
Figure 12.
ASYX 2.0 Installation Instructions - Pendant
7
EATON IL525003EN ASYX 2.0 Pendant Installation instructions
13. Tuck all electrical wires up into stem bottom. Snap on
bottom cover to bottom of pendant stem. (Figure 14).
14. To level and adjust angle of fixture head, loosen
knuckle bolt with socket wrench, and use an allen
wrench to adjust aiming by turning set screw on
top of fixture to desired angle. Tighten knuckle bolt
to a minimum of 20 ft-lbs. (Figure 15).
Set Screw
Knuckle
Bolt
IL525003EN
5 of 6
07/13/2017
Figure 13. Figure 14.
Eaton
18001 E. Colfax Avenue
Aurora, CO 80011
P: 770-486-4800
www.eaton.com/lighting
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
© 2017 Eaton
All Rights Reserved
Printed in USA
Imprimé aux États-Unis
Impreso en los EE. UU.
Publication No. TD518000EN
07/13/2017
Eaton is a registered trademark.
All trademarks are property
of their respective owners.
Eaton est une marque de commerce
déposée. Toutes les autres marques
de commerce sont la propriété de leur
propriétaire respectif.
Eaton es una marca comercial
registrada. Todas las marcas
comerciales son propiedad de sus
respectivos propietarios.
Product availability, specifications,
and compliances are subject to
change without notice
La disponibilité du produit, les
spécifications et les conformités
peuvent être modifiées sans préavis
La disponibilidad de productos, las
especificaciones y los cumplimientos
están sujetos a cambio sin previo aviso
Warranties and Limitation of Liability
Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions.
Garanties et limitation de responsabilité
Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales.
Garantías y Limitación de Responsabilidad
Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Cooper Lighting ASYX 2 - DP - Dual Pendant Installation guide

Type
Installation guide
This manual is also suitable for

Cooper Lighting ASYX 2 - DP - Dual Pendant is an innovative lighting solution designed for illuminating architectural features and providing ambient light.

It combines the benefits of both forward and wide distributions, allowing you to customize the lighting effect to suit your specific needs. With four different color temperatures to choose from, you can create the perfect ambiance for any space.

The IP66 rating ensures that the fixture is protected against dust and water, making it suitable for both indoor and outdoor applications. The heavy-wall die-cast aluminum end caps and extruded aluminum housing provide durability and longevity, while the electrostatically charged polyester powder coat paint offers superior protection against fade and wear.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI