Instruction Manual
7
On/Off Button
:
Press the power button to switch on the appliance
Speed button: Press “ON/OFF” button to enter low speed mode, the first indicator above
the speed button will turn on, press “SPEED” button one time will turn to medium speed,
the first and second indicator lights will turn on. Press “SPEED” button second time, all three
indicator lights will turn on and the appliance is at the high speed. press “SPEED” button
again will turn to low speed.
Timer button: Air purifier can be programmed to turn off after a preset amount of time. Press
the “TIMER” button to program the timer 2-4-8H.
Night light/Sleep mode: In the power-on state, press the night light /sleep button, the night
light (blue) function is turned on, the night light/sleep indicator is half-bright (blue), and the
other button lights and indicators remain semi-bright. Press night light/sleep button again, the
machine enters sleep mode. In sleep mode, the night light/sleep indicator remains semi-
bright, other button lights and display lights are off (including night light), after entering sleep
mode, the motor is muted(running at 800 rpm). Press any key to exit sleep mode. After exiting
sleep mode, the machine runs in low gear and the machine returns to normal display.
Filter Replacement Indicator: The filter needs to be replaced after use of 1000 hours. When
the filter replacement indicator turns to red color, press “Timer + Night light/Sleep button” for
3 seconds to turn off the indicator, the air purifier will be reset for the new filer.
CLEANING AND MAINTENANCE
Warning: Before cleaning and maintaining this product, be sure to turn off the power and unplug
it to the power source to avoid electric shock.
Replace the filter
We recommend cleaning the filer with a vacuum cleaner once a month and replacing it every six
months or every 1000 hours of use. After 1000 hours of use, the filter change indicator light will
turn to red color as a reminder to replace the filter. After you have fitted a new filter, press timing
+night light / sleep buttons together for 3 seconds. After 3 seconds three beeps will sound,
indicating the filter has been successfully replaced.
1) Holding the main body by one hand, rotate the bottom cover anti-clockwise from the closed
position to the open position and gently remove it.
2) Take out the used filter and insert the new filter