Classic Exhibits ECO-1065 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
ECO-1065
Type
Setup Instructions

Classic Exhibits ECO-1065 offers a versatile and durable display solution for various exhibition needs. Its modular design allows for easy assembly and customization, making it suitable for a wide range of events and spaces. The ECO-1065 features:

  • Interchangeable Panels: ECO panels can be easily swapped to accommodate different graphics or messages, providing flexibility for multiple uses.
  • SEG Fabric Graphics: Silicone Edge Graphics (SEG) ensure a taut and wrinkle-free display, enhancing the visual impact of your branding or messaging.
  • Curved Extrusions: The curved horizontals create a dynamic and inviting display, capturing attention and drawing visitors to your booth.

Classic Exhibits ECO-1065 offers a versatile and durable display solution for various exhibition needs. Its modular design allows for easy assembly and customization, making it suitable for a wide range of events and spaces. The ECO-1065 features:

  • Interchangeable Panels: ECO panels can be easily swapped to accommodate different graphics or messages, providing flexibility for multiple uses.
  • SEG Fabric Graphics: Silicone Edge Graphics (SEG) ensure a taut and wrinkle-free display, enhancing the visual impact of your branding or messaging.
  • Curved Extrusions: The curved horizontals create a dynamic and inviting display, capturing attention and drawing visitors to your booth.
866.463.2611 • www.ecosystemsdisplays.com
Setups
Order #XXXXXX - ECO-1065
Plan View 10’
10’
866.463.2611 • www.ecosystemsdisplays.com866.463.2611 • www.ecosystemsdisplays.com
General Info
7A
General Setup Instructions
•The setup instructions are created specifically for your configuration.
•Setup instructions are laid out sequentially in levels, including exploded
views and a logical series of steps for assembly. We encourage you to study
the instructions before attempting to assemble your exhibit.
Hex Tool for Assembling Exhibit Extrusion Lock Connectors
Numbering Instructions for Setups/Packing Inline Connection between Extrusions Baseplate Connection for Vertical Extrusions
Cleaning and Packing
•Use non-abrasive cleaners when cleaning extrusions or ECO Glass inserts.
•Use mild cleaners and soft materials such as cotton to clean all laminates.
•Keep exhibit components away form extreme heat and long exposure to
sun light. This will prevent warping and fading.
•Retain all packing material for ease of re-packing. This protects the exhibit
components and keeps each part organized.
Disassembling
•When disassembling exhibit, tighten all setscrews to prevent loss of hardware
in the shipping process.
866.463.2611 • www.ecosystemsdisplays.com866.463.2611 • www.ecosystemsdisplays.com
General Info
124 5
SEG Graphic Install
1
2
3
4
Graphic is installed corners first. This allows a proportional fit around the
perimeter of the extrusion.
Locate channels along the edge of the extrusions.
Fold over graphic (hiding threads) and tuck silicon edge and fabric
into corners.
After corners are complete, slide in the rest of the graphic into channel.
(From edges to center)
3
5Graphic is installed. Stand back and be amazed!
Place ECO panel together with a vertical offset, slide down to lock
connector in place.
Panel Corner Connectors are installed just like ECO panels. Remove by
off-setting top lock clips horizontally followed by separating vertically.
2
1
ECO Panel Install 12
866.463.2611 • www.ecosystemsdisplays.com
Step 1
Lower Infill
1
2
6
6
6
3
5
4
1
5
4
Item
1
2
3
4
5
6
Qty.
2
1
1
2
2
3
Description
84”h RSG510 Round Vertical Extrusion
88”h RR125 Round Vertical Extrusion
88”h RR125 Round Vertical Extrusion
30.925”w Z45 Curved Horizontal Extrusion
30.925”w Z45 Curved Horizontal Extrusion
56.5”w Z45 Curved Horizontal Extrusion
Item
x
Steps:
1) Connect curved horizontals [4] & [5] between vertical
extrusions [1] & [2].
Repeat step for remaining horizontals [4] & [5] and connect
between vertical extrusions [1] & [3].
2) Attach lowest curved horizontal [6] between assembly [1/2/4/5] &
assembly [1/3/4/5].
3) Insert lower infill panel between verticals [2] & [3]; secure with
curved horizontal extrusion [6].
4) Attach Fabric Graphics to frame with Velcro.
Velcro: Top
Edge
Velcro: Bottom
Edge
Velcro: Bottom
Edge
Velcro: Bottom
Edge
Velcro: Top
Edge
Velcro: Top
Edge
866.463.2611 • www.ecosystemsdisplays.com
Step 2
9A
9
8
7
Item
7
8
9/9A
Qty.
1
1
1/1
Description
50.065”w Z140 Monitor Mounting Extrusion
35.667”h Z45 Vertical Extrusion w/ door stops
62.125”w Z45 Curved Horizontal Extrusion
Item
x
Steps:
1) Assemble extrusions [8], [9], & [9A].
2) Connect extrusion assemlby [8/9/9A] to assembled backwall.
NOTE: Attach assembly to verticals [2] & [3].
3) Attach horizontal extrusion [7] between vertical extrusions [2] & [3].
866.463.2611 • www.ecosystemsdisplays.com
Step 3
Shelf Supports
Counter Top
Internal Shelf
Item
x
Steps:
1) Attach lower level shelf supports to velcro on interior of
backwall counter.
2) Insert internal shelf and rest it on top of installed shelf supports.
3) Attach remaining two shelf supports on top of internal shelf and to
velcro on interior of backwall counter.
4) Place counter top on supports and curved horizontal extrusions [6] & [9A]
866.463.2611 • www.ecosystemsdisplays.com
Step 4
Item
x
Steps:
1) Attach counter doors to assembled backwall.
See Door Attachment detail.
2) Connect PR63 Wire Management to the verticals [2] & [3].
NOTE: Connect PR63 Wire Management extrusions under
the horizontal [7], see detail drawing.
3) Attach lights to the top rails of assembled backwall.
See Light Connection detail.
4) Install monitor mount to horizontal extrusion [7].
See Monitor Mount Attachment detail.
5) Apply graphics to using velcro.
Attach wall plate to
horizontal bar using
bolts and wing nuts
Hook monitor brackets over
top of wall plate, then secure
with safety bolts to bottom
of monitor brackets.
Monitor Mount Attachment
*
*
*
*
Lock Light Receiving
Hardware into Groove
of Horizontal Extrusion
Light Connection
Attach light to
backwall where
desired and tighten
in place.
Door
Hinge
Hinge
Door Attachment
Slide pin into
hinge attached
to vertical.
Slide door
hinge over pin.
Wire Management Attachment
Steps:
1) Run cords through
plastic conduit.
2) Attach conduit where
indicated by pinching
the opening and
inserting into the groove.
pinch
PR63 for wire management
*
*
**
*
*
866.463.2611 • www.ecosystemsdisplays.com
Step 5
When assembled
Item
x
Item
10
11
12
13
14
15
16
Qty.
4
1
1
2
4
4
2
Description
40”h S40 Vertical Extrusion
40”h GS300 Vertical Extrusion w/ Door Stop
40”h GS300 Vertical Extrusion w/ Door Hinges
19.124”w Z41 Curved Horizontal Extrusion
8”w Z41 Horizontal Extrusion
8”w Z41 Curved Horizontal Extrusion
16.05”w Z41 Curved Horizontal Extrusion
Steps
1)
Connect lower horizontal extrusions [13-16] between
vertical extrusions [10-12] as shown.
2) Slide infills between vertical extrusions as shown.
3) Connect upper horizontal extrusions [13A-16A] between
vertical extrusions [10-12] and on top of inserts.
4) Hang door from hinges on vertical [12].
5) Velcro shelf supports inside assembled base and
place shelf on top of shelf supports.
5) Place counter top on assembled pedestal.
10
10
10
10
12
11
Counter
Shelf
13
16
15
14
14
15
13A
16A
15A
14A
14A
15A
Door
Hinge
Hinge
Door Attachment
Slide pin into
hinge attached
to vertical.
Slide door
hinge atop pin.
Infill
Infill
Infill
Infill
Door
866.463.2611 • www.ecosystemsdisplays.com
Case 1
Order #xxxxx -
Setup le can be found online at
www.ecosystemdisplays.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Classic Exhibits ECO-1065 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
ECO-1065
Type
Setup Instructions

Classic Exhibits ECO-1065 offers a versatile and durable display solution for various exhibition needs. Its modular design allows for easy assembly and customization, making it suitable for a wide range of events and spaces. The ECO-1065 features:

  • Interchangeable Panels: ECO panels can be easily swapped to accommodate different graphics or messages, providing flexibility for multiple uses.
  • SEG Fabric Graphics: Silicone Edge Graphics (SEG) ensure a taut and wrinkle-free display, enhancing the visual impact of your branding or messaging.
  • Curved Extrusions: The curved horizontals create a dynamic and inviting display, capturing attention and drawing visitors to your booth.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents