POLYWOOD TGD200GY Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
TGD200GY
Type
Operating instructions

This manual is also suitable for

HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)
1
TGD201
A -1/4-20 X 1-3/4 WAFER SHCS
4
CLOCKWISE
ROTATE
A
PILOT HOLE
INSERT
NUTS
ROTATE
CLOCKWISE
TGD200
TGD202
DescriptionQty.
frame into the insert nuts
TGD200, TGD201, TGD202
4mm Hex Key (included)
Model:
on the arm supports
__(1) HARDWARE PACK
__(2) ARM ASMB (LH/RH)
__(1) CHAIR
Attach back of arm by threading
the dowel screw attached to the arm
against the back leg.
into the pilot hole until the arm is snug
Step 1
Step 2
Attach (A) bolts thru the seat
TOOLS NEEDED
ALLHARDWAREISCOATEDSTAINLESSSTEEL
11/30/2012
ASSEMBLY INSTRUCTIONS
  • Page 1 1

POLYWOOD TGD200GY Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
TGD200GY
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents