How to pair Launcher manually
Model name: NovoConnect series (NC-X900, NC-X700, NC-X300,
NovoEnterprise, NovoPro, NovoCast), NovoStage, NovoTouch
series and NovoDisplay series.
This article about how to set up Launcher to connect Novo-
series product or WiFi router.
Step1. Plug LauncherPlus into a laptop to launch LauncherPlus.
Browse the LauncherPlus USB storage > double click Launch
Novo.exe (only for the first time set up).
Step2. Select option menu or click Configure > Edit to
select which WiFi router you intend to connect for the
LauncherPlus.
Step3. Select the SSID of the access point which your Novo-
series product is connected from the list. A prompt will
appear asking for the Wi-Fi password. Enter the Wi-Fi
password.
For access hidden SSID, please go to +Add > enter SSID and
password
Step4. Enter the IP address corresponding to Novo-series
product and press apply
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vivitek NC1000US Quick start guide
-
Vivitek BK650i Operating instructions
-
Vivitek LauncherPlus Quick start guide
-
-
-
-
-
-
-
Other documents
-
ALFAtron UC1 User manual
-
Vocera B2000 Configuration manual
-
MPMan MP-948 Quick start guide
-
HCL Me Y3 User manual
-
-
-
-
Barco ClickShare CS-100 Installation guide
-
-
Key Digital KD-BYOD4K Quick setup guide
