ABB H82351 Series User manual

2TMD041700D0041 │ 26.09.2017

Operating Instructions

ABB-Welcome IP

7" video hands-free indoor station

H82351-x

Table of contents

Operating Instructions 2TMD041700D0041 │2

Table of c ontents

1 Notes on the instruction manual .................................................................................................................. 4

2 Safety .......................................................................................................................................................... 4

3 Intended use ................................................................................................................................................ 4

4 Environment ................................................................................................................................................ 5

4.1 ABB devices ..................................................................................................................................... 5

5 Product description ...................................................................................................................................... 6

5.1 Control elements .............................................................................................................................. 6

5.2 Feature ............................................................................................................................................. 8

5.3 Terminal description ......................................................................................................................... 9

5.3.1 Connection of zones ....................................................................................................................... 10

6 Technical data ........................................................................................................................................... 12

7 Mounting/Installation .................................................................................................................................. 13

7.1 Requirement for the electrician ...................................................................................................... 13

7.2 Mounting ........................................................................................................................................ 14

7.2.1 Product dimension .......................................................................................................................... 14

7.2.2 Installation height............................................................................................................................ 14

7.2.3 Surface-mounted installation .......................................................................................................... 15

7.2.4 Disman tling ..................................................................................................................................... 15

8 Commissioning .......................................................................................................................................... 16

8.1 Basic setting ................................................................................................................................... 16

8.1.1 Volume setting ................................................................................................................................ 16

8.1.2 Sound setting .................................................................................................................................. 17

8.1.3 Display setting ................................................................................................................................ 18

8.1.4 Date and time setting ..................................................................................................................... 19

8.1.5 Language setting ............................................................................................................................ 20

8.1.6 Black list setting .............................................................................................................................. 21

8.1.7 Door entry setting ........................................................................................................................... 22

8.1.8 Alarm setting ................................................................................................................................... 25

8.1.9 Resetting to factory default............................................................................................................. 26

8.1.10 Reset factory password .................................................................................................................. 27

8.1.11 Firmware update ............................................................................................................................. 28

8.2 Advanced setting ............................................................................................................................ 29

8.2.1 Enter alarm setting ......................................................................................................................... 29

8.2.2 Set alarm zone position .................................................................................................................. 30

8.2.3 Set alarm zone attribute ................................................................................................................. 31

8.2.4 Set alarm system timer ................................................................................................................... 34

8.3 Engineering setting of indoor station .............................................................................................. 36

8.4 KNX setting .................................................................................................................................... 36

9 Operation ................................................................................................................................................... 37

9.1 Welcome screen and status bar .................................................................................................... 37

9.2 During a call ................................................................................................................................... 38

Table of contents

Operating Instructions 2TMD041700D0041 │3

9.3 Call waiting ..................................................................................................................................... 39

9.4 Calling a guard unit ........................................................................................................................ 40

9.5 Surveillance .................................................................................................................................... 41

9.5.1 Surveillance overview ..................................................................................................................... 41

9.5.2 Surveillance of outdoor station ....................................................................................................... 42

9.5.3 Home monitor ................................................................................................................................. 43

9.5.4 Community monitor ........................................................................................................................ 46

9.6 Intercom ......................................................................................................................................... 48

9.6.1 Home to home intercom ................................................................................................................. 48

9.6.2 Room to room intercom .................................................................................................................. 49

9.7 Text messages ............................................................................................................................... 51

9.8 Multi-media ..................................................................................................................................... 53

9.9 Photo album ................................................................................................................................... 54

9.10 Voice message ............................................................................................................................... 55

9.11 Alarm .............................................................................................................................................. 58

9.11.1 Arm for away .................................................................................................................................. 58

9.11.2 Feedback alarm status ................................................................................................................... 59

9.12 Intelligent community ..................................................................................................................... 60

9.13 i-jia operation .................................................................................................................................. 61

9.14 KNX operation ................................................................................................................................ 63

9.14.1 KNX scene operation ..................................................................................................................... 63

9.14.2 KNX timer setting ............................................................................................................................ 65

9.14.3 KNX user setting ............................................................................................................................. 70

9.15 Show history records ...................................................................................................................... 72

9.16 Show system information ............................................................................................................... 73

9.17 Lock screen .................................................................................................................................... 74

9.18 Call elevator ................................................................................................................................... 75

9.18.1 Firmware update ............................................................................................................................. 76

Notice ................................................................................................................................................................. 77

Notes on the instruction manual

Operating Instructions 2TMD041700D0041 │4

1 Notes on the instruction manual

Please read through this manual carefully and observe the information it contains. This will

assist you in preventing injuries and damage to property, and ensure both reliable operation and

a long service life for the device.

Please keep this manual in a safe place.

If you pass the device on, also pass on this manual along with it.

ABB accepts no liability for any failure to observe the instructions in this manual.

2 Safety

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 110-240 V supply system to be performed only by

specialist staff!

3 Intended use

This device serves as an end device for communication with the outdoor station. Support

intercom, call guard unit, unlock, visualization for surveillance, alarm and home automation, and

so on. Suitable for surface-mounted installation.

Environment

Operating Instructions 2TMD041700D0041 │5

4 Environment

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with household

waste.

– The device contains valuable raw materials that can be recycled. Therefore,

dispose of the device at the appropriate collecting facility.

4.1 ABB devices

All packaging materials and devices from ABB bear the markings and test seals for proper

disposal. Always dispose of the packing materials and electric devices and their components via

an authorized collection facility or disposal company.

ABB products meet the legal requirements, in particular the laws governing electronic and

electrical devices and the REACH ordinance.

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description

Operating Instructions 2TMD041700D0041 │6

5 Product description

5.1 Control elements

Fig. 1: Control elements

No. Function

1 7" color touch screen

2

Communication button

When an incoming call, press this button within 30 seconds to activate

communication. Press it again to end call.

3

Unlock button

3A Press this button to open the door when an incoming call or during a call.

3B Auto-unlock: The door is automatically opened 5 s after an incoming call.

4

Mute button

4A In standby mode, press this button to mute the ringtone of this indoor station.

4B In standby mode, hold this button 3 s to mute the ringtone for all indoor stations in

the same apartment.

4C When an incoming call, press this button to mute the ringtone of this indoor

station.

4D During a communication, press this button to mute the microphone of this indoor

station.

5

Message button

Press this button to view text messages.

6

Guard button

Press this button to call guard unit directly.

SD-Card

1

234567

8

9

10

11

12

Product description

Operating Instructions 2TMD041700D0041 │7

7

System setting button

Press this button to enter the system settings.

8

Power indicator

Always lights after power on.

9

Alert indicator

Always lights after arming and flashes when trigger alarm.

10

Mute indicator

Always lights after muting function is enable.

11 Microphone

12 Speaker

Tab.1: Description

Product description

Operating Instructions 2TMD041700D0041 │8

5.2 Feature

■

3 different colors of appearance to meet personal esthetic preference

■

Large 17.8 cm (7") and high-quality color TFT touch display with a resolution of 1024 x 600

pixel

■

Support PoE or directly stand alone power supply

■

Quick buttons for frequently used functions such as communication, unlock, mute, message,

call guard unit and setting.

■

Images can be saved for each incoming call and can be saved in SD card.

■

Leave a message to family members or visitors when leaving home and vice versa.

■

Visual indication when the door is open over 120 s (sensor must be connected first).

■

Support room to room intercom or home to home intercom.

■

Blacklist is used to prevent unwanted call from other apartment(s) .

■

Support automatic unlock function.

■

Support mute one indoor station or mute all indoor stations in the same apartment.

■

Support send SOS alarm to guard unit in emergency.

■

Every call will not be missed by call waiting with picture in picture technology.

■

Ease surveillance of everywhere in your home and community by ONVIF IP camera

integration.

■

Alarm sensor(s) is able to connected to take care safety and security for your home.

■

Send/Receive text message with property management software.

■

Elevator calling in advance before you prepare to go out.

■

Allow 3 ringtones to differentiate a call from outdoor, guard unit and other devices.

■

Allow import customized ringtone for SD card.

■

Electronic picture frame can be selected for screen saver.

■

Get the product link easily by scanning the QR-code displayed in the screen.

Product description

Operating Instructions 2TMD041700D0041 │9

5.3 Terminal description

Fig. 2: Terminal description

No. Function

1 RJ45 network interface

2 Plug in and plug out connector, 5P

3 Connector for door bell

4 Connector for power supply status

5 Connector for zones

Tab.2: Description

AGND

Z8

Z7

Z6

Z5

Z4

Z3

Z2

Z1

1

2

5

4

3

+12 V

AGND

N/A

GND

DC+

PS

GND

OUT

IN

Product description

Operating Instructions 2TMD041700D0041 │10

5.3.1 Connection of zones

Connection of normally closed detectors

[1] Single detector

Fig. 3: Connection of single detector - normally closed

[2] Multi detectors

Fig. 4: Connection of multi detectors - normally closed

Connection of normally open detectors

[1] Single detector

Fig. 5: Connection of single detectors - normally open

[2] Multi detectors

Fig. 6: Connection of multi detectors - normally open

Z (n)

Resistor

D

e

t

e

c

t

or

GND

10 K

Z (n)

Resistor

Detector 1

D

e

t

e

c

t

or 2

D

e

t

e

c

t

or n

GND

10 K

D

e

t

e

c

t

or

Resistor

Z (n)

GND

10 K

Detector 1

D

e

t

e

c

t

or 2

D

e

t

e

c

t

or n

Resistor

Z (n)

GND

10 K

Product description

Operating Instructions 2TMD041700D0041 │11

Note

– Any of the eight zones can be connected as one of the above four ways,

according to the actual situation.

– For the connection of the same type of zones, please according to

"Connection of multiple detectors"

– The unused zone interfaces should be closed in the "Set alarm zone

attribute" or the interfaces should be ground shielded with a 10 K resistor.

– It needs to be set in the zone property after the connection is finished.

– You can use "Start test mode" to detect whether the zone is working

properly. For details, please refer to the chapter "Set alarm zone attribute".

Technical data

Operating Instructions 2TMD041700D0041 │12

6 Technical data

Designation Value

Working voltage 27 VDC

Standby current ≤100 mA

Working current ≤300 mA

Zone working current ≤100 mA

Zone output voltage 12 VDC

Display size 7"

Display resolution 1024 x 600

Duration

Ringing: 30 s

Communication: 120 s

Surveillance: 15 s

Dimension 218 mm x 155 mm x 24.4 mm

Tab.3: Technical data

Mounting/Installation

Operating Instructions 2TMD041700D0041 │13

7 Mounting/Installation

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 110-240 V supply system to be performed only by

specialist staff!

7.1 Requirement for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering

knowledge and experience.

– Incorrect installation endangers your life and that of the user of the electrical

system.

– Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation

are as follows:

– Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect

2. Secure against being re-connected

3. Ensure there is no voltage

4. Connect to earth and short-circuit

5. Cover or barricade adjacent live parts.

– Use suitable personal protective clothing.

– Use only suitable tools and measuring devices.

– Check the type of supply network (TN system, IT system, TT system) to

secure the following power supply conditions (classic connection to ground,

protective grounding, necessary additional measures, etc.).

Mounting/Installation

Operating Instructions 2TMD041700D0041 │14

7.2 Mounting

7.2.1 Product dimension

Fig. 7: Product dimension

7.2.2 Installation height

Fig. 8: Installation height

218 mm

24.4 mm

155 mm

1.5 m

5 feet

Mounting/Installation

Operating Instructions 2TMD041700D0041 │15

7.2.3 Surface-mounted installation

Fig. 9: Surface-mounted installation

7.2.4 Dismantling

Fig. 10: Dismantling

Commissioning

Operating Instructions 2TMD041700D0041 │16

8 Commissioning

8.1 Basic setting

8.1.1 Volume setting

Fig. 11: Volume setting

■

Press the function button of the indoor station to open the "Basic setting" interface.

■

On the list on the left side, select "Volume", and then click "Select" to enter the setting

interface.

On the volume settings page,

Click "+" and "-" of "Ringtone Volume" to adjust the volume of the ring of the indoor station.

The sound of the touch screen can be switched on by checking "Touch Tone". (The system is

turned on by default)

The button sound can be switched on by checking "Button Tone". (The system is turned on by

default)

Click "OK" to save the settings.

Commissioning

Operating Instructions 2TMD041700D0041 │17

8.1.2 Sound setting

Fig. 12: Sound setting

■

Press the function button of the indoor station to open the "Basic setting" interface.

■

On the list on the left side, select "Sound", and then click "Select" to enter the setting

interface.

On the sound settings page, it is possible to customize the ringtones of calls from different

devices. For example, an outdoor station, guard unit or other devices.

The system has five ringtones to choose from. Click "Select Ringtone" to select a ringtone from

the SD card. (Only mp3 and wav formats are supported)

It is recommended that the ringtone file is placed in the SD card’s media directory.

Click “OK” to save the settings.

Commissioning

Operating Instructions 2TMD041700D0041 │18

8.1.3 Display setting

Fig. 13: Display setting

■

Press the function button of the indoor station to open the "Basic setting" interface.

■

On the list on the left side, select "Display", and then click "Select" to enter the setting

interface.

On the display setting page,

Click "+" and "-” of "Brightness" to adjust the brightness of the indoor station.

In the "Screensaver Start" drop-down list, select the screensaver start time.

In the "Screensaver End" drop-down list, select the screensaver end time.

Click "Calibration" to calibrate the screen of the indoor station. (Click on the five positions in

order)

Check "Automatic Fullscreen" to activate the automatic fullscreen function when there is an

incoming call.

Screensaver type can be selected in the "Select Screensaver" drop-down list.

– If "Clock Digital" is selected, the screensaver displays the current time at a random position

on the screen.

– If "Internal Picture" is selected, the screensaver plays three pictures of the indoor station

system on a loop.

– If "External Picture" is selected, the screensaver plays multiple pictures from the SD card’s

photo directory.

(jpg and jpeg picture formats are supported. The highest picture resolution supported is 2048 x

1600. The largest picture size is 1M.)

It is recommended that the pictures are placed in the SD card’s photo directory.

Click “OK” to save the settings.

Commissioning

Operating Instructions 2TMD041700D0041 │19

8.1.4 Date and time setting

Fig. 14: Date and time setting

■

Press the function button of the indoor station to open the "Basic setting" interface.

■

On the left side of the list, select "Date and time", and then click "Select" to enter the setting

interface.

On the date and time setting page,

In the "Time Format" drop-down list, select the type of time.

In the "Date Format" drop-down list, select the type of date.

Click "+" and"-" of "Time” to set the time and press and hold "+" and "-" to speed up the

changing of the numbers.

Click "+" and "-” of "Date" to set the date and press and hold "+ and "-" to speed up the

changing of the numbers.

The times of the indoor station and PC guard center can be synchronized by checking "Time

Sync". (Provided that the indoor station can be connected to the PC guard center)

Click “OK” to save the settings.

Commissioning

Operating Instructions 2TMD041700D0041 │20

8.1.5 Language setting

Fig. 15: Language setting

■

Press the function button of the indoor station to open the "Basic setting" interface.

■

On the list on the left side, select "Languages", and then click "Select" to enter the setting

interface.

On the language setting page, select the language required and click “OK” to save the settings.

The language can also be selected directly when the indoor station is powered up for the first

time or when the factory settings are restored.

Page is loading ...

ABB H82351 Series User manual

This manual is also suitable for

ABB H82351 Series User manual

Related papers

Other documents