Handheld Algiz RT7 Quick start guide

Handheld
Brand
Handheld
Model
Algiz RT7
Type
Quick start guide
ALGIZ RT
7
QUICK START GUIDE
WHAT’S IN THE BOX
1
The pictures shown below may differ from the actual products. To
purchase additional or optional products, contact our customer
centre.
ALGIZ RT 7
Headset
Connector Cable Cable
Micro USB 3.5mm Barrel
Charging Adaptor
Converter Plugs
Battery ScrewsBattery Pack
Algiz RT7 Main Body
x 9 pcs
YOUR ALGIZ RT7
2
ALGIZ RT 7
Barcode Reader
Receiver
Light Sensor
Proximity Sensor
Charging LED indicator
Docking Contact Pins
Power Key
Volume Keys
Primary Mic
Ports Cover
Kensington Lock
Secondary Mic
LED Flash
Rear Camera
Battery
Speaker
Function keys 4pcs
Touch Screen Display
Strap Mounts 4pcs
Front Camera
INSERTING/EXTRACTING
SIM/MICRO SD CARD
3
This is how you insert and remove the SIM/ micro SD.
Sim2
Sim1
SD Card
INSERT/REMOVE BATTERY
To insert the battery
4
1. Place the battery pack on
the back as shown.
2. Using the battery screws
(M2 X 5mm) fasten them in
position.
To remove the battery
1. Power off the device.
2. Open the battery cover by
unfastening the screws.
3. Remove the battery pack.
POWERING ON/OFF
5
Press the [Power] button on the right side of the device to turn
the Algiz RT7 unit on/off.
BATTERY CHARGING
6
Charge the unit for 3 hours before using the device for the rst
time.
ALGIZ RT 7
Power Button
I/0 COMPARTMENT LAYOUT
7
Ethernet RJ45
USB A Host
USB micro
DC Jack
3.5mm Audio Jack
(stereo & mic)
Please go to www.handheldgroup.com/knowledgebase to
download more information.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Handheld Algiz RT7 Quick start guide

Handheld
Brand
Handheld
Model
Algiz RT7
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents