Audioplex HM-1 Installation guide

Audioplex
Brand
Audioplex
Model
HM-1
Type
Installation guide

Audioplex HM-1 is a home theater junction box that offers a versatile central wiring location for home theater speaker systems. It features three quad spring clips in the front and screw-type connectors in the rear that can handle 26 to 12 gauge wire. The HM-1 is designed to fit most double gang junction boxes and makes it easy to connect and organize your speaker wires. It also includes a lifetime warranty against defects in workmanship and materials.

Audioplex HM-1 is a home theater junction box that offers a versatile central wiring location for home theater speaker systems. It features three quad spring clips in the front and screw-type connectors in the rear that can handle 26 to 12 gauge wire. The HM-1 is designed to fit most double gang junction boxes and makes it easy to connect and organize your speaker wires. It also includes a lifetime warranty against defects in workmanship and materials.

HM-1 HOME THEATER JUNCTION BOX
SPECIFICATIONS
WIRING
Connectors: Front: Three quad spring clips.
Rear: Screw Type (handle 26 to 12 gauge wire).
Mounting: Fits most double gang junction boxes.
The HM-1 Home Theater Junction Box is designed to offer a versatile central wiring location for home theater
speaker systems, although it can be used for any installation where a central wiring location would be desirable.
The wiring diagram below shows a typical home theater type installation. Please observe the following guide lines
when wiring your HM-1.
1. Make connections by stripping the wire insulation back about 3/16". Twist any loose strands
tightly.
2. Insert the wires into the openings of the connectors (paying particular attention to the polarity
+ and - of all connections), and tighten the screws. Check for any loose strands that might cause
a short circuit. Make sure that the metal part of the screw connector engages the bare wire, NOT
the insulation.
Your AUDIOPLEX TECHNOLOGY HM-1 is covered by a Lifetime warranty against any defects in workmanship and
materials. Any defects will be remedied without charge for labor or parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered by this warranty. AUDIOPLEX
TECHNOLOGY is not responsible for defective operation caused by abuse or by modification or service by any unauthorized
person or agency.
The product must be properly installed and operated according to instructions for the warranty to apply. Any necessary
servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be returned expenses prepaid, with written
authorization from the company. The product must be shipped with the proof of purchase and in the original carton and packing
material to avoid damage. This warranty gives you specific legal rights. You may have other rights which vary from state to state.
L+
L+
L+
L-
L-
L-
R+
R+
R+
R-
R-
R-
R- R+ L+L-
-
+
-
+
R+ R-
L- L+
FRONT SPEAKERS
REAR SPEAKERS
TO CENTER
CHANNEL
SPEAKER
TO SUB WOOFER
TYPICAL HM-1 INSTALLATION
404 GWH P.O. BOX 440 MELVIN VILLAGE, N.H. 03850 1-800-257-2077 603-544-8601 FAX: 603-544-8901
E-MAIL: [email protected]
TECHNOLOGY
INSTALLATION MANUAL
2006 - 2/2/06
  • Page 1 1

Audioplex HM-1 Installation guide

Audioplex
Brand
Audioplex
Model
HM-1
Type
Installation guide

Audioplex HM-1 is a home theater junction box that offers a versatile central wiring location for home theater speaker systems. It features three quad spring clips in the front and screw-type connectors in the rear that can handle 26 to 12 gauge wire. The HM-1 is designed to fit most double gang junction boxes and makes it easy to connect and organize your speaker wires. It also includes a lifetime warranty against defects in workmanship and materials.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents