ANJAN A-1243 User’s Manual
Illustration
Clock Mode
1. Time Setting
Under the clock mode, long press the Memory button to enter into time setting. You will see the hour
blinking. Adjust the hour with Up or Down button. Press the Memory button again to set the minute.
Adjust the minute with Up or Down button. Press Memory to confirm the setting. If no button is
pressed within 8 seconds, the time setting will be cancelled.
2. Backlight
The backlight will stay on 8 seconds when any button is pressed.
3. Key Lock
Press the Key Lock button to lock all other buttons.
4. Alarm Set
A) Alarm 1 Time Set : Under the clock mode, long press Alarm 1. Adjust the hour with Up or Down
button. Press the Memory button to set the minute. Adjust the minute with the Up or Down button.
Press the Alarm 1 button to confirm the setting.
B) Alarm 1 on/off : Under the clock mode, short press Alarm 1 turn on the alarm function. You will
the alarm icon blinking. Press the Memory button to confirm.
C) Alarm/Snooze Function : Beeping sound will be heard when the preset alarm time arrives. Beeping
sound will end in 1 minute if no button is pressed. Beeping sound will resume after 7 minutes for
another 1 minute. The operation will continue for 3 times. If the Power button is pressed, the
beeping will stop. If other button is pressed, the clock will enter into snooze function as mentioned
above.
Radio Operation
1. Power On
Under the clock mode, short press the Power button to turn on the radio.
2. Power Off
Under radio mode, short press the Power button to turn off the radio.
3. Wake-to-Radio
Under the clock mode, long press Power button for 2 seconds to enter into wake-to-radio setting. You
will see “AUTO RADIO” blinking. Adjust the hour with Up or Down button. Press the Memory button
to set the minute. Adjust the minute with Up or Down button. Short press Power to confirm. The
“AUTO RADIO” icon will remain. The radio will be powered on at the preset time. To cancel the
function, short press the Power button to turn on the radio and then short press the Power button again
to turn off the radio.
4. Sleep Mode
Under the radio mode, long press the Power button for 2 seconds and you will see the “SLEEP” icon
blinking. Press Up or Down to set the sleep time from 160 minutes to 0 minute(OFF). Short press the
Power button to confirm. The radio will be powered off at the preset time. To cancel the function, reset
the sleep time into OFF(0 minute) or short press the Power button to turn off the radio and then turn it
on again.
5. Channel Setting
Under the radio mode, search the required frequency and then short press the Memory button. You will
see “STR” and “CHXX” icons blinking. Press the Up or Down button to select from CH1-CH30. Press
Memory button again to confirm.
6. Channel Recall
Under the radio mode, press Recall to enter into channel mode. You will see “MEM” and “CHXX”
blinking. Press Up or Down button to select the channel. Press Recall again you will exit the channel
mode and return to the frequency mode. Under the frequency mode, press the Up or Down will result
in frequency search.
7. Auto Scan and Store
Under the channel mode, long press Memory button for 2 seconds, the radio will start searching from
low frequency to high frequency and store all the channels. When the search is finished, the radio will
automatically exit the search mode, or you can short press the Memory button to end the searching
process anytime.
8. Manual Search/Auto Search
Under the radio mode, long press Up or Down button to initiate fast frequency search. Search will stop
at the next channel. Short press Up or Down to initiate the manual search. Frequency will move by 0.1
MHz every time you press the button.
9. Time Display
Under the radio mode, short press the Time button to see the current time for 2 seconds.
10. Power Management
Under the radio mode, the radio will automatically turn off in 90 minutes if no button is pressed. You
can turn on the sleep function to set a different power-off time.
/
