2. sks
  3. EDGE AL 46

sks EDGE AL 46 User manual

  • Hello! I've reviewed the SKS user manual for the EDGE AL 46 SET fenders. This document provides detailed instructions on how to assemble and mount the fenders, covering stay adjustments, frame mounting, and sliding bridge techniques. I can help you with any questions regarding these procedures.
  • What minimum distance should be kept between the fender and the tyre?
    What torque should be used when assembling parts
    Are screws included?
GERMANY
1.
2.
1 Nm
1 Nm
LONG
SHORT
LONG
SHORT
2.1
2.2
6.1
1 Nm
3.
1.
2.
*
3.
1.
2.
1 Nm
MANUAL ¬ EDGE AL 46 SET ¬ 11494
ALLROAD ROAD
LONG
SHORT
1. Stay-assembling front + rear
To item 2.+3.+4.
Various parts for
mounting the fenders
Parts
Spacers for forks
with disc brakes
To item 1.
Various parts for
stay-assembling
Slidingbridge
ATTENTION!
Keep the minimum
distance of 15 mm
between fender and tyre.
2.1Brake-ttingfront
2. Frame mounting front
2.2 Stay attachment front incl. lengths adjustments of the stays
3. Frame mounting rear
3.2 Assembling of sliding bridge 90° degree angle
3.3 Assembling of sliding bridge 0° degree angle
3.1 Remove the rear wheel
3.2.1 Screw the sliding bridge
4. Assembling at the bottom bracket
3.2.2 Clip the fender on the sliding bridge
5. Remount the rear wheel
Mounting of spacers for frames with disc brakes
6.1 Stay attachment rear incl. lengths adjustments of the stays
6. Rear stay assembling
* Screw is not included in
the scope of delivery
ATTENTION!
/