Astria Fireplaces WRE30 Instruction Sheet

Type
Instruction Sheet

This manual is also suitable for

1. Remove protective film from stainless hood.
2. Align three mounting holes located on back side of hood with
front face of fireplace (see Figure 1). Mounting holes should
be at least 2" up from edge of fireplace opening.
3. Hold fireplace hood in place. Using a 1/8" (0.125 dia.) drill
bit, drill through 3 mounting holes.
4. Insert 3 screws through mounting holes in hood into holes
in fireplace.
OUTDOOR FIREPLACE HOOD INSTALLATION
INSTRUCTIONS
HS36 - 36" OUTDOOR FIREPLACEHOOD
HS42 - 42" OUTDOOR FIREPLACE HOOD
For Use With:
Superior® models VRE3036ZMN-ZMP and VRE3042ZMN-ZMP
Astria® models Odyssey36ZNM-ZPM and Odyssey42ZNM-ZPM
Comfort Flame® models Savannah36ZMN-ZMP and
Savannah42ZMN-ZMP
For more information, visit IHP.US.com
Innovative Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
Printed in U.S.A. © 2014 Innovative Hearth Products LLC
P/N 127151-01 Rev. B 07/2016 1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
Figure 1 - Installing Hood
Mounting holes
on Hood
Screws
  • Page 1 1

Astria Fireplaces WRE30 Instruction Sheet

Type
Instruction Sheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI