Astria Fireplaces Odyssey Instruction Sheet

1. Remove protective ﬁlm from stainless hood.

2. Align three mounting holes located on back side of hood with

front face of ﬁreplace (see Figure 1). Mounting holes should

be at least 2" up from edge of ﬁreplace opening.

3. Hold ﬁreplace hood in place. Using a 1/8" (0.125 dia.) drill

bit, drill through 3 mounting holes.

4. Insert 3 screws through mounting holes in hood into holes

in ﬁreplace.

OUTDOOR FIREPLACE HOOD INSTALLATION

INSTRUCTIONS

HS36 - 36" OUTDOOR FIREPLACEHOOD

HS42 - 42" OUTDOOR FIREPLACE HOOD

For Use With:

Superior® models VRE3036ZMN-ZMP and VRE3042ZMN-ZMP

Astria® models Odyssey36ZNM-ZPM and Odyssey42ZNM-ZPM

Comfort Flame® models Savannah36ZMN-ZMP and

Savannah42ZMN-ZMP

For more information, visit IHP.US.com

Innovative Hearth Products reserves the right to make changes at any time, without notice, in

design, materials, speciﬁcations, prices and also to discontinue colors, styles and products.

Consult your local distributor for ﬁreplace code information.

P/N 127151-01 Rev. B 07/2016 1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

Figure 1 - Installing Hood

Mounting holes

on Hood

Screws

This manual is also suitable for

Download PDF