Brigade BE-500XC (2826B)(2828B) Installation guide

Category
Camera lenses
Type
Installation guide
Brigade Electronics plc BE-500XC IG issue 2 2017 11.09 3163A
1 Contents
x1
1 2
3 4
5
SILICONE
SEALANT
x1
x1
x1
x1
x1
182cm
x1
18.5cm
x1
2 Tools Required 3 Assembly &
Connections
7 mm Ø
10 mm
N.C1.
N.C2.
Video out3.
DC 12Vdc4.
Ground5.
4 Vertical Mount
BE-500VC
5 Horizontal Mount
BE-500HC
Specifications
Pick-UP device Sharp 1/4” CCD
Picture Elements (PAL) 512 (h) x 582 (V)
Image Size 1/4 inch
Synchronisation Internal
Horizontal Illumination 380 TV Line
Lens Focal Length 1.65 mm
Signal to Noise Ratio More than 42db
Required Illumination 0.1 Lux
Voltage Supply 12 Vdc ± 2 Vdc
Power Consumption <0.85 Watts @ 12 Vdc
Maximum Aperture 2.0mm ± 5%
Current Consumption 65mA @ 12 Vdc
Viewing Angle 122° (H), 94° (V), 154° ± 5°(D
)
Operating Temperature –25°C to +80°C
Storage Temperature
40°C to +90°C
Weight 80 Grams (without cable adaptor)
Overall Dimensions (mm) 34 (W), 37 (D), 24 (H)
Video Output 1.0 Vp-p/75
Length of Cable 2000mm
Vibration Rating 10G
IP Rating of Connector N/A
IP Rating of Housing IP68
Casing Mounting Thread
M6
Specifications subject to change.
BE-500 Series
Colour Flush-Mount Cameras
Installation Guide
Optional. Apply as necessary
The BE-500 series cameras are an invaluable driver aid but does not
exempt the driver from taking every normal precaution when conducting a
manoeuvre. No liability arising out of the use or failure of the product can in
any way be attached to Brigade or to the distributor.
Original Equipment Manufacture bodybuilder guide or aftermarket installation
guidelines must be followed when installing this product. Failure to comply
with this may invalidate the vehicles warranty.
  • Page 1 1

Brigade BE-500XC (2826B)(2828B) Installation guide

Category
Camera lenses
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI