2. VISUAL COMFORT
  3. AH 3082

VISUAL COMFORT AH 3082 User manual

  • I have reviewed the Assembly Instructions for the Visual Comfort Table Lamp AH 3082. This document provides a step-by-step guide on how to assemble the lamp, including attaching the harp, shade, and bulb. It also includes instructions on how to clean the lamp and plug it into a proper electrical outlet. I'm here to assist you with any questions you may have about the assembly or care of this lamp.
  • What should I do if I find any damage or defect?
    What do I use to clean this lamp?
    Is a bulb included in the box?
Sawyer Table Lamp
Item # AH 3082
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
US
M
L
I
D
S
E
T
1. Carefully remove all parts from the box.
2. Install harp (C) onto the saddle (D).
3. Place shade (B) to the harp (C) and secure with finial (A).
4. Insert bulb (not included) into the socket.
5. Remove protective plug cover (E) from the plug.
6. Plug into a proper electrical outlet and test the fixture.
7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
A
C
D
E
Bulb
(Not included)
B
/