Lightolier C4120RM User manual

Category
Floodlights
Type
User manual

Lightolier C4120RM is a 4 1/2” Aperture Non-IC Line Voltage Remodeler Frame-In Kit designed for recessed downlighting. It is compatible with a range of reflector trims, including Open Downlight, Wall Washer, and PAR or BR lamp types.

The C4120RM features a rolled galvanized steel housing and a die-formed steel mounting frame that accommodates ceiling thicknesses from 1/2” to 2”. The quick-lock clips and fine adjustment screws ensure secure mounting, while the precision-tooled steel springs provide quick and tool-less installation of the reflector trim.

Lightolier C4120RM is a 4 1/2” Aperture Non-IC Line Voltage Remodeler Frame-In Kit designed for recessed downlighting. It is compatible with a range of reflector trims, including Open Downlight, Wall Washer, and PAR or BR lamp types.

The C4120RM features a rolled galvanized steel housing and a die-formed steel mounting frame that accommodates ceiling thicknesses from 1/2” to 2”. The quick-lock clips and fine adjustment screws ensure secure mounting, while the precision-tooled steel springs provide quick and tool-less installation of the reflector trim.

Calculite
®
Evolution Recessed Downlighting C4120RM
Page 1 of 1 4 1/2 Aperture Non-IC Line Voltage Remodeler Frame-In Kit
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 (508) 679-8131 Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0403
Features
1. Housing: Rolled galvanized steel, 0.04 (18 ga.). Removable for access to
J-Box and transformer.
2. Mounting Frame: Die-formed steel, 0.03 (22 ga.) galvanized steel.
Accommodates existing ceilings up to 2 thick.
3. Locking Clips: Quick-Lock clips provide ratcheting coarse adjustment for
ceiling thickness from 1/2 to 2 thick.
4. Fine Adjustment Screws: Provide pressure to clamp the ceiling material
for secure mounting.
5. Retaining Springs: Precision-tooled steel springs secure reflector trim to
housing for quick, tool-less installation.
6. Snap-In Connectors: Keyed to accept power and socket harnesses, which
are provided with reflector trim.
7. Junction Box: 0.03 (22 ga.) galvanized steel. UL listed for 90°C supply
connection. Integral cable clamps permit attachment of #14 or #12 ga. non-
metallic cable without tools or additional connectors.
8. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3 away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
9. Reflector Trim: Compatible reflector trims are listed above. See separate
reflector trim specification sheets for complete catalog numbers, finish,
and details.
Labels
UL Listed (suitable for damp locations), I.B.E.W.
1
4
3
7 1/4" Max.
9
1/2 - 2"
Ceiling Thickness
4 7/8"
5
2
7
8
11-3/4"
10-1/4"
5 3/4"
Ceiling Cutout: 5” (127 mm) Dia.
Frame-In Kit Reflector Trim
C4120RM Open Open Open Open
Downlight Downlight Downlight Wall Washer
C4AD C4P20D C4P30D C4AW/C4ACW/C4ADW
100W A19, MB19 50W PAR20 75W PAR30 100W A19, MB19
100W BT15 75W PAR16 Short Neck 100W BT15
75W BR19, R20
Top View
Perspective View
  • Page 1 1

Lightolier C4120RM User manual

Category
Floodlights
Type
User manual

Lightolier C4120RM is a 4 1/2” Aperture Non-IC Line Voltage Remodeler Frame-In Kit designed for recessed downlighting. It is compatible with a range of reflector trims, including Open Downlight, Wall Washer, and PAR or BR lamp types.

The C4120RM features a rolled galvanized steel housing and a die-formed steel mounting frame that accommodates ceiling thicknesses from 1/2” to 2”. The quick-lock clips and fine adjustment screws ensure secure mounting, while the precision-tooled steel springs provide quick and tool-less installation of the reflector trim.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI