Kichler Lighting 44298WWW User manual

Type
User manual

Kichler Lighting 44298WWW is a versatile light fixture designed for various indoor lighting applications. It features a stylish glass globe that provides diffused, ambient light, creating a warm and inviting atmosphere. The fixture's adjustable mounting strap allows for customized positioning to suit your specific lighting needs. Installation is simplified with the included mounting hardware, making it a user-friendly choice for DIY enthusiasts.

Kichler Lighting 44298WWW is a versatile light fixture designed for various indoor lighting applications. It features a stylish glass globe that provides diffused, ambient light, creating a warm and inviting atmosphere. The fixture's adjustable mounting strap allows for customized positioning to suit your specific lighting needs. Installation is simplified with the included mounting hardware, making it a user-friendly choice for DIY enthusiasts.

IS-44298-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
Fixture Diagram
G
A
C
D
F
E
B
H
I
J
4) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (see illus.)
Neutral Wire
5) Push xture to wall. Be sure not to pinch wires between
wall and canopy of xture.
6) Screw in two (2) mounng screws[D] on top of
canopy[E] into the mounng strap. Tighten to secure.
7) Install recommended bulb (Not supplied).
8) Place the glass globe[H] over the installed bulb and
secure in place using the 3 screws[I] and washers[J].
CAUTION: Do not overghten.
Parts List
[A] Mounting
Strap
[B] Outlet Box
[C] Strap
Mounting
Screws
[D] Mounting
Screws
[E] Canopy
[F] Drywall
Anchors
[G] Drywall
Screws
[H] Glass Globe
[I] Screws
[J] Washer
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
1) Aach mounng strap[A] to outlet box[B] using the two
(2) strap mounng screws[C]. Mounng strap can be
adjusted to suit posion of xture.
2) Use the two (2) drywall anchors[F], one on each end of
the backplate, and secure to the wall with the two (2)
drywall screws[G].
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector (Not provided) aer following the above steps.
Never connect ground wire to black or white power
supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons (connued)
IS-44298-CB
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de lEst)
INSTRUCTIONS:
For Assembling and Installing Fixtures in Canada
Pour Lassemblage et L’installaon Au Canada
3) Connecter les ls. Se reporter au tableau ci-dessous pour
faire les connexions.
Connecter le l noir ou
rouge de la boite
Connecter le l blanc de
la boîte
A Noir A Blanc
*Au cordon parallèle (rond
et lisse)
*Au cordon parallèle (à
angles droits el strié)
Au transparent, doré,
marron, ou noir sans l
disncf
Au transparent, doré,
marron, ou noir avec un l
disncf
Fil isolé (sauf l vert) avec
conducteur en cuivre
Fil isolé (sauf l vert) avec
conducteur en argent
*Remarque: Avec emploi d’un
l paralléle (SPT 1 et SPT 2). Le
l neutre est á angles droits ou
strié et lautre l doit étre rond
ou lisse (Voir le schéma).
Fil Neutre
4) Pousser le luminaire vers le mur. Ne pas pincer les ls
entre le mur et le cache du luminaire.
5) Visser deux (2) vis de montage [D] sur le dessus de
lauvent [E] dans la sangle de montage. Serrez pour
sécuriser.
6) Installer la ou les ampoules recommandées (Non
fournies).
7) Placez le globe de verre [H] sur l’ampoule installée
et xez-le à laide des 3 vis [I] et des rondelles [J].
ATTENTION: Ne pas trop serrer.
Diagramme d’appareils
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installaon.
ATTENTION:
Ce luminaire doit être installé conformément aux codes
d’électricité naonaux (NEC) et sasfaire toutes les
spécicaons des codes locaux. Si vous ne connaissez pas
les exigences de ces codes, il est recommandé de coner
l’installaon à un électricien ceré.
Liste des Pièces
Précauons
[A] Létrier De
Montage
[B] Boîte À Prises
[C] Vis de Fixation
de la Courroie
[D] Vis de
Montage
[E] Couvercle
[F] Ancrages de
cloison sèche
[G] Vis à cloison
sèche
[H] Globe de
verre
[I] Vis
[J] Rondelles
Instrucons d’installaon
G
A
C
D
F
E
B
H
I
J
1) Fixer létrier de montage[A] sur la boîte à prises[B]
de sore à laide des deux (2) vis de xaon de la
courroie[C]. Létrier de montage peut être réglé en
foncon de la posion du luminaire.
2) Ulisez les deux (2) ancrages muraux secs [F], un à
chaque extrémité de la plaque arrière, et xez-les avec
les deux (2) vis [G].
Instrucons d’installaon (a connué)
  • Page 1 1
  • Page 2 2

Kichler Lighting 44298WWW User manual

Type
User manual

Kichler Lighting 44298WWW is a versatile light fixture designed for various indoor lighting applications. It features a stylish glass globe that provides diffused, ambient light, creating a warm and inviting atmosphere. The fixture's adjustable mounting strap allows for customized positioning to suit your specific lighting needs. Installation is simplified with the included mounting hardware, making it a user-friendly choice for DIY enthusiasts.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages