Kichler Lighting 45916NI User manual

45916NI
Brand
Kichler Lighting
Model
45916NI
Type
User manual

Kichler Lighting 45916NI is a versatile and stylish wall-mounted light fixture that can be installed with the glass facing up or down. It comes with all the necessary mounting hardware, including two mounting screws, two strap mounting screws, and a ground screw. The fixture can be used with a variety of bulb types, including G9 bulbs, and features a bulb cover and glass globe for a finished look. Installation is simple and straightforward, with clear instructions and diagrams provided in the manual.

Kichler Lighting 45916NI is a versatile and stylish wall-mounted light fixture that can be installed with the glass facing up or down. It comes with all the necessary mounting hardware, including two mounting screws, two strap mounting screws, and a ground screw. The fixture can be used with a variety of bulb types, including G9 bulbs, and features a bulb cover and glass globe for a finished look. Installation is simple and straightforward, with clear instructions and diagrams provided in the manual.

IS-45916-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
3) Make wire connecons. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
4) Push xture[E] to wall. Be sure not to pinch wires
between wall and canopy of xture. Note: The xture
can be mounted with the glass in the up posion or the
down posion.
5) Screw in two (2) mounng screws[D], one on each side
of canopy.
6) Install the supplied G9 bulb[F] by pushing into the
socket. Cauon: Do not touch the bulb with bare hands,
use a rag to prevent oil from your skin from geng on
the bulb surface.
7) Install the bulb cover[G] by placing over the installed
bulb and screwing into place over the socket.
8) Install the glass globe[H] over the installed bulb cover
and screw into place.
Fixture Diagram
Parts List
[A] Mounting
Strap
[B] Outlet Box
[C] Strap
Mounting
Screws
[D] Mounting
Screws
[E] Fixture
[F] G9 Bulb
[G] Bulb Cover
[H] Glass Globe
Installaon Instrucons
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
Warning:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons (connued)
A
C
B
D
H
G
E
F
1) Aach mounng strap[A] to outlet box[B] using the two
(2) strap mounng screws[C]. The mounng strap can be
adjusted to suit posion of xture.
2) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire. Connect xture
ground wire to outlet box ground wire with wire
connector (Not provided) aer following the above steps.
Never connect ground wire to black or white power
supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
IS-45916-CB
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)
INSTRUCTIONS:
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installaon Au Canada
2) Connecter les ls. Se reporter au tableau ci-dessous pour
faire les connexions.
Connecter le l noir ou
rouge de la boite
Connecter le l blanc de
la boîte
A Noir A Blanc
*Au cordon parallèle (rond
et lisse)
*Au cordon parallèle (à
angles droits el strié)
Au transparent, doré,
marron, ou noir sans l
disncf
Au transparent, doré,
marron, ou noir avec un l
disncf
Fil isolé (sauf l vert) avec
conducteur en cuivre
Fil isolé (sauf l vert) avec
conducteur en argent
*Remarque: Avec emploi d’un
l paralléle (SPT 1 et SPT 2). Le
l neutre est á angles droits ou
strié et l’autre l doit étre rond
ou lisse (Voir le schéma).
Fil Neutre
3) Pousser le luminaire [E] contre le mur. Ne pas pincer les
ls entre le mur et le cache du luminaire.
4) Remarque : Le luminaire peut être monté avec le verre
en posion haute ou basse.
5) Serrer deux (2) vis de montage [D], une de chaque côté
du cache.
6) Installer l’ampoule G9 [F] (fournie) en l’enfonçant dans la
douille.
7) Aenon : Ne pas toucher l’ampoule à mains nues.
Uliser un chion pour empêcher l’huile sur votre peau
de pénétrer par la surface de l’ampoule.
8) ● Installer le cache de l’ampoule [G] en le plaçant sur
l’ampoule installée et en le vissant sur la douille.
9) Installer le globe de verre [H] en le plaçant sur le cache
de l’ampoule installée et visser pour bloquer.
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installaon.
ATTENTION:
Ce luminaire doit être installé conformément aux codes
d’électricité naonaux (NEC) et sasfaire toutes les
spécicaons des codes locaux. Si vous ne connaissez pas
les exigences de ces codes, il est recommandé de coner
l’installaon à un électricien ceré.
Diagramme d’appareils
Liste des Pièces
Instrucons d’installaon
Précauons
[A] Courroie De
Montage
[B] Boîte De
Sortie
[C] Vis De
Fixation De La
Courroie
[D] Vis De
Montage
[E] Luminaire
[F] G9 Ampoule
[G] Bulb Cover
[H] Glass Globe
A
C
B
D
H
G
E
F
1) Fixez la courroie de montage[A] à la boîte de sore[B]
à l’aide des deux (2) vis de xaon de la courroie[C]. La
barree de montage peut etre ajustée pour convenir à la
posion de l’applique.
Instrucons d’installaon (a connué)
  • Page 1 1
  • Page 2 2

Kichler Lighting 45916NI User manual

45916NI
Brand
Kichler Lighting
Model
45916NI
Type
User manual

Kichler Lighting 45916NI is a versatile and stylish wall-mounted light fixture that can be installed with the glass facing up or down. It comes with all the necessary mounting hardware, including two mounting screws, two strap mounting screws, and a ground screw. The fixture can be used with a variety of bulb types, including G9 bulbs, and features a bulb cover and glass globe for a finished look. Installation is simple and straightforward, with clear instructions and diagrams provided in the manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers