2. Lian Li
  3. FAN SL-INF 120
FAN SL-INF 120

Lian Li FAN SL-INF 120 Installation guide

  • Hello! I've reviewed the installation guide for the LIAN LI Fan SL-INF 120 REVERSE BLADE. This document provides step-by-step instructions on installing the fan, including the power module, fan interlocking key removal, and cable management. The document emphasizes the importance of correct LED connector usage to avoid damage. I'm ready to answer any questions you have about the installation process.
  • What should I be aware of when installing the power module?
    When can the fan interlocking key be removed?
    What should I be careful about when connecting LED connectors?
安裝指南
注意!電源⽚分為⼤⼩兩種卡榫 安裝時須注意，
Note! The socket for the power module are in
different size, please be aware of the direction.
Installation Guide
!
包裝內容物
Package Contents /
⽅向性。
x 1 pc x 1 pc
-
Fixed
Release
1
2
Power Module Installation / 電源⽚安裝
⾵扇扣鎖拆除
注意!若遇到⽔冷排出⽔位置影響⾵扇扣鎖 可將⾵扇，
卡扣鎖移除。
Note! The fan interlocking key is removable if it is
affected by the radiator inlet and outlet.
!
1 2 3
Remove the Fan Interlocking Key /
G50.1 2 R S L I N 1.00
x 4 pcs
REVERSE BLADE
Fan to Fan Connection /
Steps to Switch Orientation of the Cable on the Power Module /
⾵扇連接⾵扇
電源⽚電線轉換⽅向⽰意
注意!若 遇到 ⽔冷 排出 ⽔位 置 影 響 電 源 ⽚上 蓋 可將，
上蓋移除 以垂直⽅式⾛線， 。
Note! The top cover is removable if it is affected by the
radiator inlet and outlet, and route the cable vertically.
!
1
2
Fixed
Release
Remove Release
1 2 3
Fixed
4 5 6
Power Module to Motherboard connection / 電源⽚連接主板
Connect to PWM fan header
Connect to 5V ARGB
3 pin header
警告!請不 要連接錯誤類型的 LED接頭 如果連接，
到1 2 V接⼝ 將造成永久損壞， 。
Warning! Do not connect the wrong type of LED
connector. If it is connected to the 12 V connector,
permanent damage will occur.
5 V 12 V
!
/