TALA BSALT-I-SET-TRI-PD-01-US Installation guide

Brand
TALA
Model
BSALT-I-SET-TRI-PD-01-US
Type
Installation guide
BEFORE STARTING
We advise the tting of our ceiling rose and pendant to be performed
by a qualied electrician. Please read through these instructions
before commencing work, and keep them for future reference. Please
take extreme care when carrying out these instructions.
IMPORTANT
This light tting must be connected to the supply earth. If your lighting
circuit does not have an earth, ask a qualied electrician to provide
an earth facility. This light tting is suitable for indoor use only. This
tting operates on 120V mains voltage. Please visit our website to see
our recommended dimmers.
WARNING
Always switch off electricity supply at the mains during installation
and maintenance. We recommend that the fuse is withdrawn or the
circuit breaker is switched off whilst work is in progress. Do not just
turn off at the wall switch. All ttings must be installed in accordance
with current NFPA 70, National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Small at head screwdriver
- Wire strippers
- Insulation tape
- M10 (17mm) (5/8IN) wrench or Adjustable wrench
Further equipment may be required for xing to your ceiling.
SKU - BSALT-I-SET-TRI-PD-01-US
SKU - BSALT-I-SET-TRI-PD-02-US
IP20 120V
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
INSTALLATION GUIDE
Basalt Triple Pendant
US
STEP 1
Attach to the ceiling using screws
and plug. Always choose screws and plugs
that are appropriate for the ceiling.
BASALT TRIPLE PENDANT - COMPONENTS
x1 M10,
Internal tooth washer
x1 Ceiling plate
A
A
x3 Tala Basalt bulbs
x1 Brass nut
C
B
B
x3 Tala Basalt pendants
x1 Ceiling Bracket
D
E
F
F
A
A
Mains supply
Earth
120V
Fixings not included
B
F
STEP 2
Thread all three pendant cables
though ceiling plate cord grips .
STEP 3
Pull cables through to your desired
length. Using a at head screwdriver,
tighten set screws to secure them.
F
B
B
B
Earth
STEP 4
Cut off excess cable and strip wires to
expose the copper core. Maintain all
double insulation.
Mains supply
Earth tag from ceiling bracket
Brown or Red (L)
White (N)
Pendants
Pendants
Black or Red (L)
Pendants
Blue or Black (N)
Junction boxes
not included
Houshold Earth
Earth tag from ceiling plate
120V
B
A
STEP 5
Connect the pendants, plate and mains
wiring as shown.
120V
STEP 7
Lift metal sleave and screw in the
bulb rmly.
Take care not to let the metal
sleeve fall onto the bulb
A
C
D
B
STEP 6
Move up onto .
Use toother washer and nut to
secure it in place.
Do a nal tighten with the correct spanner.
B A
C
F
D
FF
F
F
STEP 8
Rotate metal steeve To align with
the bulb
Carefully lower metal sleeve
onto the bulb. you can now make and nal
tweeks to the alignment of the bulb and
sleeve.
F
PENDANTS DISPLAY GUIDE
MINIMUM CORD LENGTH
For all bulbs shortest recomended cord length
is 14 in.
A
DISTANCE BETWEEN PENDANTS
Recomended minimum distance
between pendant is 4 in.
B
A
B
PENDANTS - RECOMMENDED CABLE LENGTHS
SCENARIO 1
Above a coffee or dining table,
or where height is required for
seated tasks
Minimum Distance
28 in
SCENARIO 2
Above side tables, or where
height is required for storage
Minimum Distance
19 in
SCENARIO 3
Above a kitchen island or bar,
or where height is required
for standing tasks
Minimum Distance
32 in
Minimum Distance
7 Ft
SCENARIO 4
Above a stairwell or walkway,
or where height is required
for walking underneath
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala North America, 68 Jay Street, #602, Brooklyn, NY 11201 | +1 (929) 294-9574 | [email protected]
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use
abrasive materials as these will damage the nish of the product.
WARRANTY AND AFTER-CARE
This product has a three-year warranty. Within this time
we will replace any parts that have functional defects.
Please report any faults by emailing:
[email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

TALA BSALT-I-SET-TRI-PD-01-US Installation guide

Brand
TALA
Model
BSALT-I-SET-TRI-PD-01-US
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents