SUSSEX DPTMHM Installation guide

DPTMHM
SUSSEX
Brand
SUSSEX
Model
DPTMHM
Type
Installation guide
AS/NZS 3718:2005
LIC. 20081
W AT ER
RATING
Licence No.Licence No. 0124
Wat er Consu mpti on
The mor e
star s t he mor e
wa ter ef fici ent
w w w . w a t e rr a t i n g .g o v . a u
litre s p er minu te
When tes ted in accor dance w it h S tar dard A S/NZS 64 00
For mo re i nfo rma tion a nd to co mpar e
produ cts, r ef er t o:
5
A j oint go ver nmen t an d i ndus try pr ogr am
W AT ER
RATING
Wat er Consu mpti on
The mor e
star s t he mor e
wa ter ef fici ent
w w w . w a t e rr a t i n g . go v . a u
litre s pe r m inut e
When tes ted in accor dan ce w it h Stan dard AS/ NZS 6400
For mo re in for mat ion a nd t o com par e
produ cts,
refe r to :
8.5
A j oint go ver nmen t an d i ndus try pr ogr am
Licence No.Licence N o. 0124
WATER
RATING
Water Consumption
The mor e
stars the mo re
water efficient
www.waterrating.gov.au
litres per minute
When tested in accordance with Standard AS/NZS 6400
For more information and to compare
produ cts, refer to:
7.5
A joint government and industr y program
Licence No. 0124
POL Basin Set
POL Basin Mixer
POL Basin Mixer Extended
POL Sink Mixer
( Twin Handle )
W AT ER
RATING
Licence No.Licence No. 0124
Wat er Consu mpti on
The mor e
star s t he mor e
wa ter ef fici ent
w w w . w a t e rr a t i n g .g o v . a u
litre s p er minu te
When tes ted in accor dance w it h S tar dard A S/NZS 64 00
For mo re i nfo rma tion a nd to co mpar e
produ cts, r ef er t o:
5.5
A j oint go ver nmen t an d i ndus try pr ogr am
POL Sink Mixer
( Single Lever )
POL Shower Head
POL Hand Held Shower
-Maximum Mounting Surface thickness is 45mm. (i)
-Hob Mixer: 49mm - 51mm Clearance Hole. (ii)
-Mounting Surface must be flat and level.
-Prior to installing remove:
- (B) Clamping Ring
- (C) Clamping Plate
-Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2021
-Recommended working water pressure 300 - 500 Kpa. Maximum water temperature is 65°C
-After installation, ensure that tapware functions correctly without leaks.
-Please ensure a copy of the Installation Instructions are left with the end user for future reference.
DPTMHM
Duet
Top Mount Hob Mixer
Product code
Install Preparation:
Plumbers note:
A
C
B
D
-(A) Handle Assembly Body.
-(B) Clamping Ring.
-(C) Clamping Plate.
-(D) Fixing Screws.
Product parts:
While we aim to ensure the specifications shown are correct at time of printing, Sussex Taps reserves the right to make modifications without prior notice.
Always use the physical product for accurate measurements. Dimensions are subject to change without notice. All measurements are shown in millimetres.
Copyright © Sussex Taps sussextaps.com.au
M
i
x
e
d
O
U
T
M
i
x
e
d
O
U
T
C
H
Step 1
Place the Hob Mixer (A) into the clearance hole making sure that the mixer is in the 'OFF'
position facing 'FRONT'.
'Mixed OUT' Extentsion is to face the 'FRONT'.
Step 2
Working from underneath, Attach the Clamping Ring (B) to the Hob Mixer (A). Thread the
Clamping Plate (C) until it tightens the Ring. Secure the Hob Mixer by tightening the Fixing
Screws (D) using a 5mm Allen key- Tighten well.
Step 4
- Connect Hot and Cold hoses to wall fittings.
- Note: Stop cocks are recomended. (not supplied)
- Connect 'Mixed OUT' hose to outlet
- After all connections are made operate Hob Mixer and check for any leaks.
Step 3
Attach Hot and Cold flexible hoses to the Hob Mixer. Attach the 'Mixed OUT' flexible hose to
the 'Mixed OUT' extension of the Hob Mixer.
A
A
C
B
D
'Mixed OUT'
Extension
Apply a SMALL amount
of sealant to seal surface
prior to fitting
Extension
sussextaps.com.au
  • Page 1 1
  • Page 2 2

SUSSEX DPTMHM Installation guide

DPTMHM
SUSSEX
Brand
SUSSEX
Model
DPTMHM
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents