SUSSEX VEBM120 is an extended basin mixer with a 120mm outlet, ideal for basins with a wider spread. With its modern design and durable construction, it's a perfect choice for any bathroom. The mixer features a single lever for easy control of both water flow and temperature, making it simple to find the perfect setting.
SUSSEX VEBM120 is an extended basin mixer with a 120mm outlet, ideal for basins with a wider spread. With its modern design and durable construction, it's a perfect choice for any bathroom. The mixer features a single lever for easy control of both water flow and temperature, making it simple to find the perfect setting.
2
SUSSEX
INFO & INSTALL GUIDES
CONCEPTS
sussextaps.com.au
5.0 litres per
minute
Licence No. 0124
In accordance with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterrating.gov.au
The more
stars the more
water efcient
AS/NZS 3718:2005
LIC. 20081
Calibre
INFORMATION SHEET
Calibre Basin Mixer
Product code: CBM
160
80
100
40
35
48
sussextaps.com.au
5.0 litres per
minute
Licence No. 0124
In accordance with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterrating.gov.au
The more
stars the more
water efcient
AS/NZS 3718:2005
LIC. 20081
Calibre
Calibre Basin Mixer
Product code: Available options:
CBM Basin Mixer
CEBM Extended Basin Mixer
INSTALLATION GUIDE
PLUMBER NOTE
-On-site testing using higher water pressures must be
conducted with the Mixer in the closed position.
(STATIC TEST )
-Under no circumstances is the Mixer to be opened
when exceeding the maximum stated water pressure.
-At the completion of testing, do not relieve any high
water pressure by operating the Mixer.
-Exposing the internals of the Mixer Cartridge to higher
than specified water pressures will void the
manufacturers warranty.
INSTALLATION GUIDELINES
-The Mixer is supplied assembled, only the Fixing nut
and the Clamp need to be removed.
-After removing the mentioned parts, lower the Mixer
on to the mounting surface and fit the Flexible Hoses.
-In some cases the Flexible Hoses may need to be fed
through from under the mounting surface and then
attached. (Tighten using appropriate spanner)
-After securing the Flexible Hoses, fit Clamp and attach
the Fixing Nut from underneath.
-Before fully securing the Mixer ensure that the Base O
Ring is intact and the Mixer is properly centered over
the mounting surface hole.
-The Mixer mounting surface must be completely sealed
and water-tight.
-The 1/2” Fittings of the Flexible Hoses have a conical
seal, ensure that the matching threads are cut square
and burr free.
-Prior to connecting the Flexible Hoses, ensure all
pipework is thoroughly flushed and ensure pipework is
free of any dirt or debri.
-Isolating Stop Valves are recommended with all
installations. (not supplied)
-Connect the Flexible Hoses to Hot and Cold pipework
fittings, ensure the Hoses do not kink or become
twisted when tightening.
-Check all fittings and connections are secure and
water-tight.
BASE
O-RING
CLAMP
Hole Size
32-35mm
50mm Max.
Bench thickness
1/2" BSP Fittings
with conical Seals FLEXIBLE HOSES
FIXING
NUT
CONCEPT One
7.5 litres per
minute
Licence No. 0124
In accordance with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterrating.gov.au
The more
stars the more
water efcient
Mounting
Surface
Fixing
Nut Flexible Hose
Clamp
Optional
Base Flange
Hose extension
(Do not remove)
32 - 35mm
Product code
Installation guidelines
Plumber note
Voda
- The Mixer is supplied assembled, only the Fixing nut and the Brass Clamp need to be removed.
- Decide if the Optional Base Flange is to be used.
- If using the Optional Base Flange discard the smaller Base O Ring.
- Add the base Flange to base of Mixer and attach the Flexible Hoses to the Mixer Hose extensions.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then attach.
- Once the Flexible Hoses have been secured, lower the Mixer onto the mounting surface.
- Working from underneath the mounting surface fit Clamp and Fixing Nut.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is centered over the
mounting surface hole.
- The Mixer mounting surface must be completely water-tight.
- Connect the Hot and Cold Flexible hoses to the corresponding 1/2”BSP water feed lines.
- The 1/2” connection of the Flexible hoses have a conical seal, ensure the mating threads are cut square and
burr free.
- Isolating stop valves are recommended with all installations (not supplied).
- Ensure all fittings and connections are water-tight.
Note: Optional Base Flange must be used when the clearance hole for mounting the Mixer exceeds 35mm.
If the mounting hole clearance exceeds 45 mm a custom made Base flange will be required.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
VBM Basin mixer
VEBM Extended basin mixer 90mm outlet
VEBM120 Extended basin mixer 120mm outlet
VMBM Medium basin mixer 90mm outlet
VMBM120 Medium basin mixer 120mm
VBMSS Basin mixer 316 S/S
Basin mixer
sussextaps.com.au
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
-
1
SUSSEX VEBM120 is an extended basin mixer with a 120mm outlet, ideal for basins with a wider spread. With its modern design and durable construction, it's a perfect choice for any bathroom. The mixer features a single lever for easy control of both water flow and temperature, making it simple to find the perfect setting.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SUSSEX BEBM85 Installation guide
-
SUSSEX RBM Installation guide
-
SUSSEX RBM-72 Operating instructions
-
-
-
SUSSEX Calibre Basin Mixer Bathroomware Owner's manual
-
-
SUSSEX BWBMS210RH Installation guide
-
SUSSEX CMDSRH Installation guide
-
SUSSEX DPTMHM Installation guide
Other documents
-
Wolfen 9508244 Installation guide
-
-
Oliveri PR113500CR Installation guide
-
Puretec QT12-TRIPLA User manual
-
-
Argent EURA Care & Installation Manual
-
Lefroy Brooks JL 1222 Installation & Servicing Guide
-
-
Caroma Contura Installation guide
-
Puretec ESR2-T6 User guide
