S9 PIN Pad
Connector Cord
P/N 810022-010 (6 ft)
or
P/N 810022-009 (15 ft)
Installation
Insert the end of the PIN pad
connector cord into the
Hypercom POS terminal port
labeled PIN.
Equipment Check List
S9 Installation Guide
Connector cord
PIN port
Compliance
This equipment is compliant with the following:
FCC Part 15 (ICES-003) EN60950
CISPR-22 EN55022
EN55024
World Headquarters
2851 West Kathleen Road
Phoenix, AZ 85053
Tel: 602.504.5000
877.HYPERCOM within USA
Fax: 602.866.5380
e-mail: [email protected]
web: www.hypercom.com
© Hypercom Corporation, 2004. All rights reserved. Hypercom, the Hypercom logo are registered trademarks of Hypercom
Corporation. All other products or services mentioned are trademarks, service marks, registered trademarks or registered service
marks of their respective owners.
940414-002 Rev. C 04/04
S9Install_940414002_RevC_single.qxd 7/29/04 9:18 AM Page 1
S9 PIN Pad
INSTALLATION GUIDE
S9Install_940414002_RevC_single.qxd 7/29/04 9:19 AM Page 2
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hypercom ICE 5700 ICE 5700 User manual
-
-
-
-
-
-
-
-
-